-
Vendor:Cisco
Cisco VWIC3-1MFT-G703 | 1x E1 G.703 MFT, 2.048 Mbps unframed/framed (G.704), Nx64k, RJ-45 120Ω; PRI/PPP/FR; EHWIC for ISR G2
VWIC3-1MFT-G703
Stock Status: Enquire
Vendor:CiscoCisco VWIC3-1MFT-G703 | 1x E1 G.703 MFT, 2.048 Mbps unframed/framed (G.704), Nx64k, RJ-45 120Ω; PRI/PPP/FR; EHWIC for ISR G2
Single-port G.703 E1 Multiflex Trunk card for ISR G2 routers, supporting unframed (G.703) and framed (G.704) E1 operation. Ideal for leased-line backhaul, PRI, and channelized Nx64 kbps services with flexible data and voice capabilities. -
Vendor:Cisco
Cisco VIC3-4FXS-DID | 4x FXS/DID analog ports (RJ-11) | Caller ID, T.38 fax (IOS/DSP dep.) | Echo cancel | VIC3 form factor
VIC3-4FXS-DID
Stock Status: Enquire
Vendor:CiscoCisco VIC3-4FXS-DID | 4x FXS/DID analog ports (RJ-11) | Caller ID, T.38 fax (IOS/DSP dep.) | Echo cancel | VIC3 form factor
Add four FXS/DID analog ports to a compatible voice gateway router to connect analog phones, fax machines, or PBX trunks with direct-inward-dial capability. RJ-11 interfaces provide battery feed and ring generation for FXS endpoints, with caller ID support and T.38 fax relay or G.711 pass-through (IOS/DSP dependent). Third‑generation VIC3 hardware offers improved timing and echo performance for reliable enterprise voice deployments. -
Vendor:Cisco
Cisco VIC3-2FXS-E-DID | 2‑port FXS/E with DID voice interface card | RJ‑11, caller ID, battery reversal, T.38/fax relay
VIC3-2FXS-E-DID
Stock Status: Enquire
Vendor:CiscoCisco VIC3-2FXS-E-DID | 2‑port FXS/E with DID voice interface card | RJ‑11, caller ID, battery reversal, T.38/fax relay
Provide two enhanced FXS ports with DID capability for analog stations or trunks. This interface card supports caller ID, battery reversal for metering, and loop‑start signaling, with platform‑dependent SIP/MGCP/H.323 integration and T.38 fax relay. Ideal for connecting analog phones, faxes, modems, or PBX trunks to IP telephony systems. -
Vendor:Cisco
Cisco VIC3-2FXS-DID | 2x FXS/DID analog ports (RJ-11) | Caller ID, T.38 fax (IOS/DSP dep.) | Echo cancel | VIC3 form factor
VIC3-2FXS-DID
Stock Status: Enquire
Vendor:CiscoCisco VIC3-2FXS-DID | 2x FXS/DID analog ports (RJ-11) | Caller ID, T.38 fax (IOS/DSP dep.) | Echo cancel | VIC3 form factor
Add two FXS/DID analog ports to a compatible voice gateway router for connecting analog phones, fax machines, or DID trunks. Provides RJ-11 interfaces with battery feed and ring generation, caller ID support, and T.38 fax relay or G.711 pass-through (IOS/DSP dependent). The VIC3 hardware generation enhances echo and clocking performance for dependable branch telephony. -
Vendor:Cisco
Cisco VIC3-2E-M | 2x E&M analog trunk ports (RJ-48), Type I–V selectable | ISR voice gateway module
VIC3-2E-M
Stock Status: Enquire
Vendor:CiscoCisco VIC3-2E-M | 2x E&M analog trunk ports (RJ-48), Type I–V selectable | ISR voice gateway module
Two-port E&M voice/fax interface card for connecting analog tie-lines to PBXs, radio systems, or legacy voice infrastructure on supported ISR platforms. Supports multiple E&M signaling types and 2- or 4-wire audio paths; media features depend on router IOS and DSP resources. -
Vendor:Cisco
Cisco VIC2-4FXO | 4-port FXO voice interface card (VIC2), RJ-11 analog trunks, loop/ground start, requires PVDM DSP, ISR router expansion
VIC2-4FXO
Stock Status: Enquire
Vendor:CiscoCisco VIC2-4FXO | 4-port FXO voice interface card (VIC2), RJ-11 analog trunks, loop/ground start, requires PVDM DSP, ISR router expansion
Second-generation 4-port FXO (VIC2) voice interface card providing analog PSTN trunk connectivity for voice-enabled ISR routers. Supports loop-start/ground-start signaling, caller ID, and tone detection when paired with router DSP resources. Ideal for PSTN access and analog failover. -
Vendor:Cisco
Cisco VG420-RM-19-2R | 19-inch rack mount kit | 2RU | ears + screws | for VG420 chassis
VG420-RM-19-2R
Stock Status: Enquire
Vendor:CiscoCisco VG420-RM-19-2R | 19-inch rack mount kit | 2RU | ears + screws | for VG420 chassis
Mounting hardware kit for securing a 2RU VG420 chassis into standard 19-inch equipment racks, providing a clean, secure, and serviceable installation. -
Vendor:Cisco
Cisco VG420-NIM-BLANK | NIM slot blank cover | VG420 chassis filler | Airflow/EMI cover
VG420-NIM-BLANK
Stock Status: Enquire
Vendor:CiscoCisco VG420-NIM-BLANK | NIM slot blank cover | VG420 chassis filler | Airflow/EMI cover
Blank filler panel for an empty Network Interface Module (NIM) slot on a VG420 chassis, helping maintain proper airflow, cooling efficiency, and EMI compliance when a slot is unpopulated. -
Vendor:Cisco
Cisco VG420-84FXS/6FXO | Analog Voice Gateway | 84 FXS + 6 FXO | SIP/MGCP | T.38 Fax | 2RU rackmount
VG420-84FXS/6FXO
Stock Status: Enquire
Vendor:CiscoCisco VG420-84FXS/6FXO | Analog Voice Gateway | 84 FXS + 6 FXO | SIP/MGCP | T.38 Fax | 2RU rackmount
Mixed analog gateway with high FXS density plus FXO trunks for PSTN fallback or local break-in/break-out. Ideal for sites transitioning to IP telephony while retaining analog devices and a handful of copper lines. -
Vendor:Cisco
Cisco VG420-144FXS | Analog Voice Gateway | 144 FXS | SIP/MGCP | T.38 Fax | 2RU rackmount
VG420-144FXS
Stock Status: Enquire
Vendor:CiscoCisco VG420-144FXS | Analog Voice Gateway | 144 FXS | SIP/MGCP | T.38 Fax | 2RU rackmount
High-density analog voice gateway for large FXS deployments. Seamlessly connects legacy analog phones, faxes, and paging systems to IP telephony environments using open SIP/MGCP call control. Designed for reliable branch or campus analog integration with straightforward management and rack-friendly installation. -
Vendor:Cisco
Cisco VG420-132FXS/6FXO | Analog voice gateway, 132 FXS + 6 FXO, SIP/MGCP, T.38 fax, SRST, 2x GE
VG420-132FXS/6FXO
Stock Status: Enquire
Vendor:CiscoCisco VG420-132FXS/6FXO | Analog voice gateway, 132 FXS + 6 FXO, SIP/MGCP, T.38 fax, SRST, 2x GE
Ultra‑high‑density analog voice gateway with 132 FXS and 6 FXO ports to connect large fleets of analog devices and provide local PSTN access. Supports SIP/MGCP, secure signaling/media, and branch survivability for enterprise telephony rollouts. Ideal for hospitality, healthcare, and campus environments migrating to IP while preserving analog endpoints. -
Vendor:Cisco
Cisco VG410-RM-23-1R | Rack mount kit, 23-inch telco, 1RU, for VG410
VG410-RM-23-1R
Stock Status: Enquire
Vendor:CiscoCisco VG410-RM-23-1R | Rack mount kit, 23-inch telco, 1RU, for VG410
23-inch telco 1RU rack-mount ear kit for installing the VG410 gateway in 23-inch relay racks common in telecom environments. Provides a secure, professional installation. -
Vendor:Cisco
Cisco VG410-RM-19-1R | Rack mount kit, 19-inch, 1RU, for VG410
VG410-RM-19-1R
Stock Status: Enquire
Vendor:CiscoCisco VG410-RM-19-1R | Rack mount kit, 19-inch, 1RU, for VG410
19-inch 1RU rack-mount ear kit for securely installing the VG410 gateway in standard EIA-310 racks. Includes mounting brackets and hardware for a clean, stable fit. -
Vendor:Cisco
Cisco VG410-48FXS | Analog voice gateway, 48 FXS, SIP/MGCP, T.38 fax, SRST, 2x GE
VG410-48FXS
Stock Status: Enquire
Vendor:CiscoCisco VG410-48FXS | Analog voice gateway, 48 FXS, SIP/MGCP, T.38 fax, SRST, 2x GE
High‑density analog voice gateway with 48 FXS ports for connecting legacy analog phones, fax machines, and modems to IP telephony systems. Supports SIP/MGCP, secure signaling/media, and survivability for branch deployments. Ideal for migrating analog endpoints to a unified communications core while retaining PSTN interoperability via external gateways. -
Vendor:Cisco
Cisco VEDGE-5000-AC-K9 | SD-WAN router | 4 NIM slots | AC power
VEDGE-5000-AC-K9
Stock Status: Enquire
Vendor:CiscoCisco VEDGE-5000-AC-K9 | SD-WAN router | 4 NIM slots | AC power
High-performance SD-WAN edge/aggregation router with modular expansion via 4 NIM slots, suitable for larger branches or regional hubs. Supports centralized orchestration, secure overlays, and application-aware routing in Cisco SD-WAN deployments. -
Vendor:Cisco
Cisco VEDGE-2000-PWR | AC PSU | for vEdge 2000
AC power supply unit designed for the vEdge 2000 SD-WAN router. Ideal as a replacement or spare to minimize downtime. Power cord sold separately.
Why Choose XS Network Tech?
We are a trusted partner for businesses of all sizes, including government departments, data centres, and service providers. Our expert team in sales, logistics, and customer service ensures that your needs are met with speed and precision, from pre-sales consultation to order fulfilment. With a commitment to fast delivery, sustainability, and a wide inventory, XS Network Tech is your go-to source for IT hardware. Trust us for quality, fast responses, and a hassle-free experience every time.