Power Cables

The IEC C13 to C14 Power Cable range from Blue Cable Co® is designed for reliable power distribution in data centres, enterprise racks, and office environments. These cables are the industry standard for connecting servers, switches, UPS devices, and PDUs, ensuring safe and compliant power delivery.

Available in lengths from 1 m to 5 m and in black, red, and blue, they provide flexibility for different rack layouts and easy cable identification.

Key Features

• IEC C13 to C14 Connectors – Standard lead for powering servers, switches, PDUs, and UPS devices.

• 250V 10A Rated – Supports common enterprise and office power requirements.

• Multiple Lengths (1–5m) – Options for short patching or longer rack runs.

• Colour Choices (Black, Red, Blue) – Simplifies cable management and circuit separation.

• RCM Compliant & AS/NZS Certified – Fully tested to Australian safety and performance standards.

Trusted by IT professionals for dependable power connections in mission-critical environments. Choose Blue Cable Co® for compliance, quality, and performance you can rely on.

The C14 to C15 High-Temperature Power Cable from Blue Cable Co® is designed for high-performance power distribution in data centres, enterprise racks, and industrial environments. Ideal for connecting switches, servers, PDUs, and other high-temp networking gear, these cables ensure safe, stable, and compliant power delivery.

These power cables are trusted by IT professionals for reliable power distribution in mission-critical environments.

Choose Blue Cable Co® for quality, compliance, and performance you can rely on.

Australian AC Power Cord, 3Pin AU Plug to C7, 10A 

This can be used to power Network Devices that require a C7 input connector (commonly reffered to as the Figure 8 Plug).

Specifications: 

Length: 1.8m

Amps: 10A

Connector A: IEC C7

Connector B: AU 3 Pin (AS/NZ 3112), 10Amp

Australian AC Power Cord, 3Pin AU Plug to C5, 10A 

This can be used to power Network Devices that require a C5 input connector (also known as Clover Leaf).

Specifications: 

Length: 1.8m

Amps: 10A

Connector A: IEC C5

Connector B: AU 3 Pin (AS/NZ 3112), 10Amp

Australian AC Power Cord, 3Pin AU Plug to C13, 10A.

Commonly known as the "Kettle Cord". This can be used to power most Network Devices that require a C13 input connector.

Specifications: 

Length: 1.85m

Amps: 10A

This 30cm & 2m IEC C14 to mains socket power cable is ideal for tight spaces and rackmount setups where a short lead is essential. Commonly used to connect PDUs to UPS systems or devices with IEC C13 inlets, this heavy-duty power cable ensures reliable performance in data centres, server rooms, and network racks.

• Length: 30cm & 2m Options
• Connector A: IEC C14 Plug
• Connector B: AU 3-Pin Mains Socket
• Voltage Rating: 250V AC
• Perfect for minimising cable clutter in racks and cabinets

Order now for fast shipping across Australia.

Power your high-demand IT equipment with the Blue Cable Co® C20 to C21 Power Cable. Designed for enterprise-grade performance, this 2-metre, 20 amp power cord is ideal for connecting servers, PDUs, and network switches in data centre and rack environments. Built to last with heavy-duty construction, this cable ensures safe, reliable power delivery for mission-critical hardware

• Input Plug: IEC 60320 C20

• Output Connector: IEC 60320 C21

• Length: 2 metres

• Power Rating: 20 Amps, 250 Volts

• Colour: Black

• Core Thickness: 3x 1.5mm2
  

Australian mains power lead with AS/NZS 3112 plug to IEC C15 high‑temperature connector for equipment requiring a C15 (mates with C16 inlet). 1.8 m length provides flexible rack-to-outlet reach. Suitable for AU/NZ regions and IT appliances needing a C15 tail.

High‑current AU mains to IEC C19 power cord for devices with C20 inlets, offering extra reach with a 1.8 m length. Rated 16A at 250V, ideal for dense rack deployments and high‑draw equipment in Australian environments.

Connect high-draw IT equipment with an IEC C20 inlet to a compatible power source using an IEC 60320 C20 to IEC 60320 C19 lead. The Blue Cable Co CAB-C19-C20-xM is commonly used for UPS systems, rack PDUs, power distribution gear, servers, and enterprise switching, where a 16A-rated connection is required.

Built with 1.5mm² conductors and available in 1m, 3m, and 5m, these lengths suit everything from short in-rack links to longer cabinet-to-PDU runs while keeping cable routing clean and reliable.

Power high-draw IT equipment from an Australian mains outlet with a 16A AU 3-pin plug to IEC 60320 C19 power cable. The Blue Cable Co CAB-C19-AU-1.8M is built for equipment with an IEC C20 inlet (matched to a C19 connector), commonly found on UPS systems, rack PDUs, enterprise switches, and servers.

Made with 1.5mm² conductors and a practical 1.8m length, it’s ideal for comms rooms and data centre racks where you need reliable power delivery and clean cable routing.

Important: This is a 16A Australian plug with a wider earth pin, so it will not fit a standard 10A household outlet. It requires a 16A socket.

The IEC C14 to C15 1.85 m High-Temperature Power Cable from Blue Cable Co® is the OEM-equivalent replacement for standard power cords supplied with enterprise hardware. Commonly bundled by major vendors such as Cisco, Fortinet, Arista, Aruba, Extreme, Juniper, Tripp Lite, and Meraki, this cable is purpose-built for high-performance power distribution in data centres, enterprise racks, and industrial environments.

Ideal for connecting network switches, servers, PDUs, and other high-temp equipment, the 1.85 m black lead ensures safe, stable, and compliant power delivery in demanding environments.

Trusted by IT professionals as a reliable OEM-equivalent cable for mission-critical deployments. Choose Blue Cable Co® for compliant, high-quality, ready-to-deploy power solutions.

Australian AC Power Cord, 3Pin AU Plug to C15, 10A

Similar to the common "Kettle Cord", but with a cut out notch at the bottom of the connector. This can be used to power Network Devices that require a C15 input connector.

Specifications: 

Length: 1.85m

Amps: 10A

Connector A: C15

Connector B: AU 3 Pin (AS/NZ 3112), 10Amp

IEC C20 to Saf-D-Grid 250VAC 20A Cabinet Jumper PDU Power Cable is most commonly used for providing power from a PDU to a blade server chassis, high-powered server, large network router, or similar device.

The Saf-D-Grid connector is compatible with power supplies on Cisco NCS 5000 Routers & Nexus 9000 switches, as well as NXA Power supplies.

4Meter length (14 foot)