-
Vendor:Cisco
AIR-AP-BRACKET-1 | Low Profile Universal Access Point Mount for Cisco
AIR-AP-BRACKET-1
In stock
Vendor:CiscoAIR-AP-BRACKET-1 | Low Profile Universal Access Point Mount for Cisco
Low‑profile mounting bracket for enterprise access points, enabling secure, clean installations on walls or ceilings and compatibility with common T‑rail ceiling hardware. Ideal for standard office and campus deployments. -
Vendor:Cisco
AIR-ACC-CAT6 | RJ45 gland for use with Cat 6/6a cabling - 5 pack
AIR-ACC-CAT6
In stock
Vendor:CiscoAIR-ACC-CAT6 | RJ45 gland for use with Cat 6/6a cabling - 5 pack
Weather-sealing RJ45 cable glands designed for Cat6/6A cabling. Ideal for outdoor APs and enclosures to maintain an environmental seal and provide strain relief at entry points. Pack of 5 glands for multi-drop deployments. -
Vendor:Cisco
Cisco PWR-INJDC-30 | 30W PoE+ (802.3at) injector | DC input | 1x GbE data-in, 1x PoE-out
PWR-INJDC-30
Vendor:CiscoCisco PWR-INJDC-30 | 30W PoE+ (802.3at) injector | DC input | 1x GbE data-in, 1x PoE-out
Single-port DC-powered PoE injector delivering up to 30W PoE+ to a connected device. Provides gigabit data pass-through and is suited for powering access points, IP cameras, and VoIP phones where only a DC source is available. Indoor use. -
Vendor:Cisco
Cisco PWR-115W-AC | AC PSU | 115W | for 3504 Wireless Controller
High-reliability 115W AC power supply purpose-built for the 3504 Wireless Controller, ideal as a replacement or spare to keep controller uptime assured. -
Vendor:Cisco
Cisco P-LPWA-900 | LoRaWAN PIM | 900 MHz ISM | 8-channel gateway module
Plug-in LoRaWAN interface module enabling 900 MHz ISM-band connectivity with 8 concurrent channels for compatible industrial gateways/routers. Ideal for LPWA IoT sensor backhaul in campus and field deployments. -
Vendor:Cisco
Cisco LTE-ANTM2-SMA-D | LTE SMA V2 dipole antenna | Bands 698–960/1448–1511/1710–2690 MHz | SMA direct‑mount | Omni
LTE-ANTM2-SMA-D
Vendor:CiscoCisco LTE-ANTM2-SMA-D | LTE SMA V2 dipole antenna | Bands 698–960/1448–1511/1710–2690 MHz | SMA direct‑mount | Omni
Second‑generation SMA dipole antenna for LTE/4G/3G equipment, covering 698–960, 1448–1511, and 1710–2690 MHz. Direct‑mount design with swivel/tilt hinge enables easy positioning in space‑constrained panels. Omnidirectional pattern with vertical polarization supports reliable cellular links for primary, backup, or SD‑WAN use cases. Use two antennas for 2x2 MIMO configurations. -
Vendor:Cisco
Cisco LTE-ANTM-SMA-D | LTE SMA dipole antenna | Bands 698–960/1448–1511/1710–2690 MHz | SMA direct‑mount | Omni
LTE-ANTM-SMA-D
Vendor:CiscoCisco LTE-ANTM-SMA-D | LTE SMA dipole antenna | Bands 698–960/1448–1511/1710–2690 MHz | SMA direct‑mount | Omni
Direct‑mount SMA dipole antenna for LTE/4G/3G routers, covering 698–960, 1448–1511, and 1710–2690 MHz. Omnidirectional pattern and vertical polarization deliver dependable cellular connectivity in network cabinets and panels. The compact form with swivel/tilt hinge aids optimal placement and clearance. Use two units for 2x2 MIMO cellular interfaces. -
Vendor:Cisco
Cisco LTE-ANTM-I-2-W | LTE indoor 2‑in‑1 MIMO antenna | Bands 700–2600 MHz | Dual elements for 2x2 MIMO | Low‑profile white
Low‑profile indoor 2‑in‑1 LTE antenna with dual integrated elements for true 2x2 MIMO performance. Covers wide 700–2600 MHz bands to support global LTE/4G/3G connectivity. Discreet white housing suits offices, branches, and retail spaces while simplifying dual‑lead routing to your router or gateway. -
Vendor:Cisco
Cisco LTE-ANTM-D | LTE articulating dipole antenna | Bands 698–960/1448–1511/1710–2690 MHz | Direct‑mount swivel/tilt | Omni
Compact articulating dipole antenna for LTE/4G/3G routers and gateways, covering 698–960, 1448–1511, and 1710–2690 MHz. Direct‑mount swivel/tilt hinge allows optimal orientation inside cabinets or rack enclosures. Omnidirectional pattern supports reliable primary or failover cellular links. Use a pair for 2x2 MIMO cellular interfaces. -
Vendor:Cisco
Cisco IW9167IH-Z-AP | Wi-Fi 6E tri-band (2.4/5/6 GHz)
Industrial tri-band Wi‑Fi 6E access point with integrated antennas for streamlined deployment. Internal omnidirectional antennas simplify installs while delivering robust, low-latency connectivity. Z regulatory domain variant for applicable regions. -
Vendor:Cisco
Cisco IW9167EH-Z-AP | Wi-Fi 6E tri-band (2.4/5/6 GHz)
Industrial tri-band Wi‑Fi 6E access point with external-antenna flexibility for harsh and high-density environments. Eight RF ports support a wide range of antenna patterns for precise coverage design, while PoE+ simplifies deployment. Z regulatory domain variant for applicable regions. -
Vendor:Cisco
Cisco IW9165DH-Z-AP | Industrial Wi‑Fi 6E AP | 2.4/5/6 GHz tri‑band | directional high‑gain antenna | AP image | PoE+
High‑performance industrial access point with integrated directional high‑gain antenna for focused coverage and long corridors, yards, or trackside deployments. Tri‑band Wi‑Fi 6E hardware supports 2.4/5/6 GHz (region permitting), powered by PoE+, and designed for rugged outdoor/industrial environments. Ships with the AP software image for standard WLAN operations and controller integration. -
Vendor:Cisco
Cisco IW9165DH-ROW-URWB | Industrial Wi‑Fi 6E | 2.4/5/6 GHz tri‑band | directional high‑gain antenna | URWB backhaul image | PoE+
Heavy‑duty, directional tri‑band platform for long‑range industrial wireless with integrated high‑gain antenna. Ships with URWB (Ultra‑Reliable Wireless Backhaul) software image for deterministic point‑to‑point or point‑to‑multipoint backhaul in challenging environments, with PoE+ power and a rugged enclosure. AP functionality is available when loaded with the AP software image (licensed separately). -
Vendor:Cisco
Cisco IW3702-4E-Z-K9 | Industrial Wi‑Fi 5 AP | 2.4/5 GHz dual‑band | 4 external RF ports (top) | PoE+ | 1x GbE uplink
Industrial access point designed for demanding environments with four top‑mounted RF ports for external antennas. Provides reliable dual‑band Wi‑Fi 5 connectivity, PoE+ power, and a single Gigabit uplink, suitable for plants, yards, and transportation hubs. Supports controller‑based operations and enterprise security controls. -
Vendor:Cisco
Cisco IW3702-4E-UXK9 | Industrial Wi‑Fi 5 AP | 2.4/5 GHz dual‑band | 4 external RF ports (top) | PoE+ | 1x GbE uplink
Rugged, dual‑band industrial access point with four external RF ports for flexible antenna selection and optimized coverage in harsh environments. Delivers Wi‑Fi 5 performance for 2.4/5 GHz clients, powered over PoE+ with a single GbE uplink, ideal for warehouses, transportation, and outdoor enclosures. Supports controller‑based deployments and enterprise security. -
Vendor:Cisco
Cisco IW3702-2E-Z-K9 | Wi‑Fi 5 (802.11ac) industrial AP | dual-band 2.4/5 GHz | up to 1.3 Gbps | 4x external antenna ports | PoE+
Industrial 802.11ac access point with external-antenna connectors for demanding RF deployments; engineered for rugged, high-reliability operation in industrial environments.
Why Choose XS Network Tech?
We are a trusted partner for businesses of all sizes, including government departments, data centres, and service providers. Our expert team in sales, logistics, and customer service ensures that your needs are met with speed and precision, from pre-sales consultation to order fulfilment. With a commitment to fast delivery, sustainability, and a wide inventory, XS Network Tech is your go-to source for IT hardware. Trust us for quality, fast responses, and a hassle-free experience every time.