-
Vendor:Aruba
Aruba R4Y93A | LTE outdoor extender kit, dual LTE MIMO + GPS antennas, 35 ft leads; SD-WAN/LTE
Extend cellular signal reach to improve WAN failover or primary LTE performance for branch gateways. This outdoor-rated kit places LTE and GPS antennas where reception is strongest and brings signal indoors via 35 ft low-loss cabling for reliable modem connectivity. Ideal for SD-WAN edge deployments where indoor LTE coverage is weak or obstructed. Includes outdoor antennas, mounting hardware, and pre-terminated coax leads for a clean, quick install. -
Vendor:Cisco
Cisco PWR-2691-AC | 2691 AC PSU | 100–240V AC, 50/60Hz | Auto‑ranging internal replacement | Non–hot‑swappable
Auto‑ranging AC replacement power supply for the 2691 modular router. Provides reliable mains power handling with global 100–240V support, restoring full operation when the original PSU has failed or when converting from DC to AC power. -
Vendor:Cisco
Cisco PWR-2600-DC | 2600 Series DC PSU | Input -48V DC (range -36 to -72V) | Internal replacement | Non–hot‑swappable
Field-replaceable DC power supply for 2600 Series edge routers. Designed for telecom -48V DC plants with a wide input tolerance and secure terminal-block input. Ideal for deployments where DC power is mandated and reliability is critical. -
Vendor:Cisco
Cisco PWR-2600-AC | AC 100–240V internal PSU | for 2600/2600XM Series | auto‑ranging | IEC C14 inlet
PWR-2600-AC
Vendor:CiscoCisco PWR-2600-AC | AC 100–240V internal PSU | for 2600/2600XM Series | auto‑ranging | IEC C14 inlet
Internal AC power supply module for 2600 and 2600XM Series routers. Supports global mains input and restores reliable operation with a platform‑matched replacement. -
Vendor:Cisco
Cisco PWR-2500-AC | AC 100–240V internal PSU | for 2500 Series | auto‑ranging | IEC C14 inlet
PWR-2500-AC
Vendor:CiscoCisco PWR-2500-AC | AC 100–240V internal PSU | for 2500 Series | auto‑ranging | IEC C14 inlet
Internal AC power supply module designed for 2500 Series platforms. Auto‑ranging input supports global mains voltages for reliable, continuous operation. -
Vendor:HPE
HPE JH297A | 1x 1GbE SFP, 2x GbE WAN, 4x GbE LAN, 802.11n Wi‑Fi (2.4 GHz), Comware v7, IPsec VPN, SD‑WAN ready, no integrated LTE
Compact branch router with integrated 802.11n wireless for secure, resilient WAN access. It combines dual copper WAN plus a 1GbE SFP for flexible uplinks, four GbE LAN ports for local connectivity, and Comware v7 software for advanced routing, segmentation, and VPN. Ideal for remote sites needing policy-based path control, strong encryption, and straightforward management in a small footprint. -
Vendor:HPE
HPE JH296A | 1xGE SFP WAN + 2xGE WAN, 4xGE LAN, CW7, SD‑WAN capable branch router
Compact branch router running Comware v7 with versatile WAN options. Offers one GE SFP WAN, two additional GE WAN (RJ45), and four GE LAN ports for small sites. Designed for secure VPN, policy‑based routing, QoS, and optional SD‑WAN architectures to steer traffic across hybrid WAN links. -
Vendor:HPE
HPE JH294A | E1 G.703 RJ45‑to‑2xBNC 75Ω cable, 3 m, for coax E1 WAN
Adapter cable converting an E1 RJ45 interface to dual BNC 75‑ohm connectors for coaxial E1 services. Ideal for connecting router E1 ports to carrier 75Ω G.703 circuits over short distances within racks or wiring closets. -
Vendor:HPE
HPE JH172A | MSR HMIM: 8x E1/T1 (fractional), RJ-48C, channelized Nx64K WAN, data/voice-ready
Eight-port HMIM module for MSR routers that provides E1 and T1 connectivity with full channelization for fractional Nx64K services. It enables cost-effective WAN access and interworking for sites retaining TDM circuits while moving toward converged IP networks. -
Vendor:HPE
HPE JH169A | MSR HMIM: 8x E1/CE1/T1/CT1 (PRI), RJ-48C, channelized WAN/voice, fractional Nx64K, ISDN PRI capable
High-density HMIM for MSR routers delivering eight ports of TDM circuits for branch or edge integration. It supports E1/CE1 and T1/CT1 operation with channelization for fractional Nx64K services, enabling both data WAN connectivity and ISDN PRI for voice trunks. Ideal for mixed legacy TDM and IP environments migrating to converged networks. -
Vendor:HPE
HPE JH137A | FlexNetwork 6600 FIP-240 flexible interface platform, 240 G fabric capacity, multi-FIC hosting, hot-insert capable on supported chassis
Flexible Interface Platform for 6600 routers, providing a high-bandwidth carrier to host multiple interface cards. It increases slot density and aggregate throughput with a 240 G class fabric, enabling a mix of WAN/LAN interfaces on the same platform. Designed for scalable service edge deployments with simplified lifecycle management through the chassis control plane. -
Vendor:HPE
HPE JH075A | HSR6800 router main processing unit (RSE-X3), control/forwarding engine, carrier-grade HA, IPv4/IPv6/MPLS, Comware OS
Main control and routing engine for HSR6800 chassis, delivering high-performance IPv4/IPv6 forwarding and full-service edge capabilities. It consolidates control, route processing, and management, enabling carrier-grade high availability with redundant MPUs and fast convergence. Ideal for large enterprise and service provider cores needing scalable MPLS VPN, advanced routing, and rich OAM with centralized management under Comware. -
Vendor:HPE
HPE JG737A | MSR SIC 4x enhanced synchronous serial (sync/async) WAN module
Adds four high‑performance synchronous/asynchronous serial interfaces to modular MSR routers using the SIC slot. Ideal for legacy WAN connections, SCADA, industrial, or specialized serial backhaul, with flexible cabling options to common serial standards and support for PPP/HDLC encapsulations. -
Vendor:HPE
HPE JG426A | MSR HMIM 24x 10/100/1000Base-T switch module, Layer2, non-PoE
Expand MSR chassis with 24 additional Gigabit Ethernet RJ45 switch ports. This HMIM form-factor module delivers Layer 2 switching with VLAN, link aggregation, and spanning tree capabilities, ideal for branch aggregation and LAN extension inside modular MSR routers. It is a non-PoE switching module designed for MSR platforms that support HMIM slots. -
Vendor:HPE
HPE JG422A | 8x 1GbE RJ-45 HMIM module, 10/100/1000 autosensing, non-PoE, MSR4000 compatible
An HMIM expansion module that adds eight copper Gigabit Ethernet ports to modular services routers in the MSR4000 family. Ideal for high-density LAN aggregation or routed access, it supports auto-negotiation and auto MDI/MDIX for seamless deployment. The module integrates with the chassis operating system for VLANs, link aggregation, QoS, and monitoring consistent with platform capabilities. Designed for reliability with line-rate forwarding and simple installation. -
Vendor:HPE
HPE JG402A | 8-slot modular services router chassis, SD-WAN/LTE-ready, IPv4/IPv6, voice/VPN/QoS, redundant PSU, HMIM expansion
A modular services router chassis built for large branches, regional hubs, and WAN aggregation. With up to 8 HMIM slots, it adapts to diverse WAN, LAN, and voice needs while maintaining high availability. SD-WAN features improve application performance across hybrid WANs, and LTE readiness enables cellular backup using appropriate modules. Delivers comprehensive routing, VPN, security, and QoS services with centralized management options.
Why Choose XS Network Tech?
We are a trusted partner for businesses of all sizes, including government departments, data centres, and service providers. Our expert team in sales, logistics, and customer service ensures that your needs are met with speed and precision, from pre-sales consultation to order fulfilment. With a commitment to fast delivery, sustainability, and a wide inventory, XS Network Tech is your go-to source for IT hardware. Trust us for quality, fast responses, and a hassle-free experience every time.