-
Vendor:Cisco
Cisco UCSX-SD800GS3X-EP | 2.5in 12G SAS SSD • 800GB • Enterprise Performance • 3 DWPD
UCSX-SD800GS3X-EP
Stock Status: Enquire
Vendor:CiscoCisco UCSX-SD800GS3X-EP | 2.5in 12G SAS SSD • 800GB • Enterprise Performance • 3 DWPD
Enterprise-performance 800GB 2.5-inch SAS SSD for UCS X-Series compute, built for mixed-use workloads that demand steady performance and endurance. Dual-port 12 Gb/s SAS ensures high availability across redundant backplanes. -
Vendor:Cisco
Cisco UCSX-SD800GBKNK9 | 2.5in 12G SAS SSD • 800GB • Enterprise Performance • 3 DWPD • SED FIPS
UCSX-SD800GBKNK9
Stock Status: Enquire
Vendor:CiscoCisco UCSX-SD800GBKNK9 | 2.5in 12G SAS SSD • 800GB • Enterprise Performance • 3 DWPD • SED FIPS
Enterprise-performance 2.5-inch SAS solid-state drive for UCS X-Series, ideal for mixed-use workloads that need consistent latency and strong endurance. Dual-port 12 Gb/s SAS provides high availability, and hardware encryption with FIPS validation supports stringent compliance requirements. -
Vendor:Cisco
Cisco UCSXSD960G6I1XEVD | 2.5in 6G SATA SSD | 960GB | Enterprise Value (read-intensive) | Hot-swap | For UCS X-Series
UCSXSD960G6I1XEVD
Stock Status: Enquire
Vendor:CiscoCisco UCSXSD960G6I1XEVD | 2.5in 6G SATA SSD | 960GB | Enterprise Value (read-intensive) | Hot-swap | For UCS X-Series
Cost-effective 2.5-inch SATA SSD for UCS X-Series servers, ideal for read-intensive workloads and boot volumes. Delivers consistent, low-latency reads over a 6 Gb/s SATA interface. -
Vendor:Cisco
Cisco UCSXSD800GS3XEP-D | 2.5in 12G SAS SSD | 800GB | Enterprise Performance (mixed-use) | Hot-swap | For UCS X-Series
UCSXSD800GS3XEP-D
Stock Status: Enquire
Vendor:CiscoCisco UCSXSD800GS3XEP-D | 2.5in 12G SAS SSD | 800GB | Enterprise Performance (mixed-use) | Hot-swap | For UCS X-Series
Enterprise-performance 2.5-inch SAS SSD for UCS X-Series servers, ideal for mixed-use application workloads that need consistent throughput and low latency. Uses a 12Gb/s SAS interface for robust dual-port connectivity and high availability. -
Vendor:Cisco
Cisco UCSXE-MRX64G2RE5 | 64GB DDR5-6400 RDIMM, 2Rx4, ECC, 288-pin, PC5-51200
UCSXE-MRX64G2RE5
Stock Status: Enquire
Vendor:CiscoCisco UCSXE-MRX64G2RE5 | 64GB DDR5-6400 RDIMM, 2Rx4, ECC, 288-pin, PC5-51200
High-capacity DDR5-6400 ECC Registered server memory providing 64GB per module with a 2Rx4 organization for robust multi-rank performance. Leveraging 16Gb ICs, an on-module PMIC, and on-die ECC, it delivers stable, high-bandwidth operation for memory-intensive workloads on DDR5 RDIMM platforms. -
Vendor:Cisco
Cisco UCSXE-MRX32G1RE5 | 32GB DDR5-6400 RDIMM, 1Rx4, ECC, 288-pin, PC5-51200
UCSXE-MRX32G1RE5
Stock Status: Enquire
Vendor:CiscoCisco UCSXE-MRX32G1RE5 | 32GB DDR5-6400 RDIMM, 1Rx4, ECC, 288-pin, PC5-51200
High-speed DDR5-6400 ECC Registered server memory delivering 32GB capacity with 1Rx4 organization. Built on 16Gb ICs with an on-module PMIC and on-die ECC to enhance signal integrity and stability. Ideal for boosting bandwidth and responsiveness in virtualization, databases, and analytics on platforms that support DDR5 288‑pin RDIMMs. -
Vendor:Cisco
Cisco UCSX-NVB1T9M2V | 1.92TB 2.5in U.3 NVMe, PCIe Gen4 x4, 15mm, 1 DWPD, enterprise PLP
UCSX-NVB1T9M2V
Stock Status: Enquire
Vendor:CiscoCisco UCSX-NVB1T9M2V | 1.92TB 2.5in U.3 NVMe, PCIe Gen4 x4, 15mm, 1 DWPD, enterprise PLP
Enterprise NVMe SSD for UCS X‑Series, offering 1.92 TB in a 2.5-inch U.3 15 mm form factor with PCIe Gen4 x4 performance. Suited to read-intensive and general-purpose workloads, with stable QoS. Includes power-loss protection and data integrity features, and supports hot-swap operation on qualified NVMe backplanes. -
Vendor:Cisco
Cisco UCSX-NVB1T6O1P | 1.6TB 2.5in U.2 NVMe, PCIe Gen4 x4, 15mm, 3 DWPD, enterprise PLP
UCSX-NVB1T6O1P
Stock Status: Enquire
Vendor:CiscoCisco UCSX-NVB1T6O1P | 1.6TB 2.5in U.2 NVMe, PCIe Gen4 x4, 15mm, 3 DWPD, enterprise PLP
Enterprise-grade NVMe SSD in a 2.5-inch U.2 15 mm form factor for UCS X‑Series nodes. Provides PCIe Gen4 x4 performance with a higher-endurance profile for mixed and write-intensive workloads. Features power-loss protection and data-path integrity for consistent, reliable service in hot-swap NVMe bays. -
Vendor:Cisco
Cisco UCSX-NVB1T6M2P | 1.6TB 2.5in U.3 NVMe, PCIe Gen4 x4, 15mm, 3 DWPD, enterprise PLP
UCSX-NVB1T6M2P
Stock Status: Enquire
Vendor:CiscoCisco UCSX-NVB1T6M2P | 1.6TB 2.5in U.3 NVMe, PCIe Gen4 x4, 15mm, 3 DWPD, enterprise PLP
Enterprise NVMe SSD for UCS X‑Series with a 2.5-inch U.3 15 mm form factor and PCIe Gen4 x4 performance. Built for write-intensive and mixed-use workloads with higher endurance and consistent QoS. Includes power-loss protection and data integrity features, and is suitable for hot-swap NVMe backplanes. -
Vendor:Cisco
Cisco UCSX-NVB15TO1V | 15.36TB 2.5in U.2 NVMe, PCIe Gen4 x4, 15mm, 1 DWPD, enterprise PLP
UCSX-NVB15TO1V
Stock Status: Enquire
Vendor:CiscoCisco UCSX-NVB15TO1V | 15.36TB 2.5in U.2 NVMe, PCIe Gen4 x4, 15mm, 1 DWPD, enterprise PLP
High-capacity enterprise NVMe SSD for UCS X‑Series compute nodes, delivering PCIe Gen4 x4 performance in a 2.5-inch U.2 15 mm form factor. Optimized for read-intensive and general-purpose workloads with consistent latency and QoS. Designed for hot-swap carrier bays and NVMe backplanes, with power-loss protection and end-to-end data integrity for always-on environments. -
Vendor:Cisco
Cisco UCSX-NVB3T8O1V | 3.8TB 2.5in U.2 NVMe PCIe 4.0 x4, 15mm, 1 DWPD
UCSX-NVB3T8O1V
Stock Status: Enquire
Vendor:CiscoCisco UCSX-NVB3T8O1V | 3.8TB 2.5in U.2 NVMe PCIe 4.0 x4, 15mm, 1 DWPD
Enterprise NVMe SSD for Cisco UCS X-Series using a 2.5-inch U.2, 15mm form factor. Provides Gen4 x4 performance and efficient 1 DWPD endurance for general-purpose and read-intensive workloads with enterprise reliability features. -
Vendor:Cisco
Cisco UCSX-NVB3T8M2V9 | 3.8TB 2.5in U.3 NVMe PCIe 4.0 x4, 15mm, 1 DWPD, FIPS SED
UCSX-NVB3T8M2V9
Stock Status: Enquire
Vendor:CiscoCisco UCSX-NVB3T8M2V9 | 3.8TB 2.5in U.3 NVMe PCIe 4.0 x4, 15mm, 1 DWPD, FIPS SED
Security-focused enterprise NVMe SSD for UCS X-Series with U.3, 15mm form factor. Provides Gen4 x4 performance and 1 DWPD endurance, plus FIPS-compliant self-encrypting drive capabilities for regulated environments. -
Vendor:Cisco
Cisco UCSX-NVB3T8M2V | 3.8TB 2.5in U.3 NVMe PCIe 4.0 x4, 15mm, 1 DWPD
UCSX-NVB3T8M2V
Stock Status: Enquire
Vendor:CiscoCisco UCSX-NVB3T8M2V | 3.8TB 2.5in U.3 NVMe PCIe 4.0 x4, 15mm, 1 DWPD
Enterprise NVMe SSD for UCS X-Series with a 2.5-inch U.3, 15mm design. Delivers Gen4 x4 performance and efficient endurance for general-purpose and read-intensive workloads, with enterprise data protection features. -
Vendor:Cisco
Cisco UCSX-NVB3T2O1P | 3.2TB 2.5in U.2 NVMe PCIe 4.0 x4, 15mm, 3 DWPD, PLP
UCSX-NVB3T2O1P
Stock Status: Enquire
Vendor:CiscoCisco UCSX-NVB3T2O1P | 3.2TB 2.5in U.2 NVMe PCIe 4.0 x4, 15mm, 3 DWPD, PLP
High-endurance NVMe SSD for Cisco UCS X-Series compute nodes. The 2.5-inch U.2, 15mm Gen4 x4 drive delivers consistent low-latency performance for mixed-use workloads with enterprise features including power-loss protection and end-to-end data path protection. -
Vendor:Cisco
Cisco UCSB-SDC480OA1V | 480GB 2.5in SATA SSD | 6Gb/s | Enterprise read‑optimized | 15mm | 3D TLC, PLP
UCSB-SDC480OA1V
Stock Status: Enquire
Vendor:CiscoCisco UCSB-SDC480OA1V | 480GB 2.5in SATA SSD | 6Gb/s | Enterprise read‑optimized | 15mm | 3D TLC, PLP
Enterprise 480GB 2.5‑inch SATA SSD optimized for read‑heavy workloads. The 15mm z‑height variant is designed for specific carrier and bay requirements. Provides consistent throughput on SATA 6Gb/s with power‑loss protection and end‑to‑end data integrity for dependable operation. -
Vendor:Cisco
Cisco UCSB-SDA480OA1P | 480GB 2.5in SATA SSD | 6Gb/s | Enterprise read‑optimized | 3D TLC, PLP
UCSB-SDA480OA1P
Stock Status: Enquire
Vendor:CiscoCisco UCSB-SDA480OA1P | 480GB 2.5in SATA SSD | 6Gb/s | Enterprise read‑optimized | 3D TLC, PLP
Enterprise‑class 480GB 2.5‑inch SATA solid‑state drive for boot, read‑intensive workloads, and mixed application profiles. Delivers consistent latency, sustained throughput on 6Gb/s SATA, and features enterprise protections such as power‑loss protection and end‑to‑end data integrity.
-
Why buy Cisco from XS Network Tech?
We are the independent Cisco specialist Australian IT teams, data centres, and government departments rely on for speed and availability. Unlike other resellers, we hold our own stock in Australia. With us you bypass the 4 - 8 week lead times that slow most Cisco procurement down. From pre-sales to fulfilment, our team moves as fast as your project.
-
Can I still buy discontinued Cisco models?
Yes, we supply both current-generation Cisco switches, routers, and modules and end-of-life (EOL) models that other resellers no longer stock. We hold stock for discontinued Catalyst, Nexus, ISR, ASR, and UCS models. Whether you need a like-for-like spare, a cost-effective upgrade, or a legacy model to extend your existing deployment, we can source it.
-
How quickly can I get Cisco hardware in Australia?
Our Cisco range covers switches (Catalyst, Nexus, Industrial), routers (ISR, ASR), wireless (Meraki, Aironet), security appliances, transceivers, servers (UCS), and accessories from new, used, and EOL. All units are stocked in Sydney and available for same-day dispatch Australia-wide. When you need hardware fast, we can actually deliver it.
