• White Cisco IW9167EH-Z-HZ Catalyst Wi-Fi 6E access point with ribbed textured surface and mounting hardware outdoors
1 1

Cisco

Cisco IW9167EH-Z-HZ | Catalyst IW9167E Wi-Fi 6E Access Point, HAZLOC, Z Domain

IW9167EH-Z-HZ

Stock Status: Enquire

Request Quote
Sale Sold out
Shipping calculated at checkout.
20-min response

Need a quote or bulk pricing? Answered within 20 minutes, Sydney business hours.

Description

The Catalyst IW9167E-HZ is a ruggedised Wi-Fi 6E tri-radio industrial access point built for hazardous locations such as oil and gas, mining, chemical and petrochemical plants. It also suits AGVs and AMRs, rail and mobile asset connectivity, and network extension where running fibre is not practical. This SKU is the Z regulatory domain variant with eight external N-type antenna ports.

The three radios run 4x4 MU-MIMO on 2.4 GHz, 5 GHz and 5/6 GHz, with PHY data rates up to 7.8 Gbps. Wired connectivity comes from one 100M/1G/2.5G/5G Multigigabit Ethernet port with PoE+ and UPOE input, plus one SFP slot supporting copper 100M/1G/10G or fibre 1G/10G. A TNC port supports the built-in GNSS receiver. Power draw is 25 W on 802.3at PoE+ with 2x2 radios, or 48 W on 802.3bt UPOE or 24-48 VDC with full 4x4 operation.

The unit is rated IP66/IP67 and UL50E Type 4X, operates from -40 to +70 C, and carries Class I Div 2, Zone 2/22, ATEX, IECEx and UKEx hazardous location certifications. In Wi-Fi mode it is managed by Cisco Catalyst 9800 Series Wireless Controllers, and the same hardware can run Workgroup Bridge or Ultra-Reliable Wireless Backhaul software images.

Enquire with XS Network Tech for new or used pricing and availability.

Features

- Wi-Fi 6E with OFDMA, uplink and downlink MU-MIMO, BSS colouring and Target Wake Time
- Wi-Fi 6/6E, Workgroup Bridge and Ultra-Reliable Wireless Backhaul on one hardware platform, selected by software image
- URWB mode provides low latency with seamless handoffs for moving assets
- Dedicated scanning radio for CleanAir spectrum analysis and WIPS
- Bluetooth 5.1 LE radio for asset tracking and wayfinding
- Built-in GNSS receiver, including reporting to AFC services for 6 GHz operation
- Container support for edge and IoT applications
- Secure boot, image signing and Trust Anchor module
- Hardened permanent M25 cable ports for hazardous location installation

Warranty

All products sold by XS Network Tech include a 12-month warranty on both new and used items. Our in-house technical team thoroughly tests used hardware prior to sale to ensure enterprise-grade reliability.

All technical data should be verified on the manufacturer data sheets.

View full details

specs-tabs

Technical Specifications

FAQs

Technical Specifications

- Wi-Fi standard: Wi-Fi 6E (802.11ax), tri-radio, 4x4 MU-MIMO
- Radios: 2.4 GHz 4x4, 5 GHz 4x4, 5/6 GHz 4x4
- Channel widths: 2.4 GHz 20 MHz; 5 GHz 20/40/80 MHz; 5/6 GHz 20/40/80/160 MHz
- PHY data rate: up to 7.8 Gbps
- Antenna ports: 8 x N-type external, 1 x TNC GNSS
- Ethernet: 1 x 100M/1G/2.5G/5G Multigigabit (RJ-45/M12) with PoE+ and UPOE input
- SFP: 1 x copper 100M/1G/10G or fibre 1G/10G
- Console: RJ-45
- Input power: 802.3at/bt PoE or 24-48 VDC (18-60 VDC range)
- Power draw: 48 W (4x4 on all radios), 25 W (802.3at, 2x2 on all radios)
- Memory: 2048 MB DRAM, 1024 MB flash
- Dimensions (W x L x H): 29.2 x 26.7 x 7.1 cm
- Weight: 4.3 kg
- Operating temperature: -40 to +70 C
- Environmental ratings: IP66, IP67, UL50E Type 4X
- Hazardous locations: Class I Div 2, Zone 2/22, UL, ATEX, IECEx, UKEx
- Maximum Tx power: 24 dBm (2.4 GHz), 30 dBm (5 GHz), 23 dBm (5/6 GHz)
- Bluetooth: 5.1 LE with built-in GNSS receiver
- Rail and industrial standards: EN 50155, EN 50121-4, EN 61373

FAQs

Q: What licence does this access point need?
A: Wi-Fi mode uses Industrial Wireless Cisco DNA licences, IW-DNA-E (Essentials) or IW-DNA-A (Advantage). URWB mode uses the IW9167-URWB-NW licence family. Licences are ordered separately through a Cisco Smart Account.

Q: How is it powered?
A: It runs from 802.3at PoE+ at 25 W with 2x2 radios, 802.3bt UPOE at 48 W with full 4x4 operation, or 24-48 VDC. A Cisco AC-DC power adapter (IW-PWRADPT-MFIT4P=) and a power injector (IW-PWRINJ-60RGDMG=) are available as accessories.

Q: Which controllers manage it in Wi-Fi mode?
A: Cisco Catalyst 9800 Series Wireless Controllers, physical or virtual. Wi-Fi AP mode needs Cisco IOS XE 17.9.4 or later.

Q: What does the Z regulatory domain mean for this SKU?
A: The Z domain sets the permitted channels and power levels, which include 2.412-2.462 GHz and the 5 GHz bands 5.500-5.700 GHz and 5.745-5.825 GHz. 6 GHz operation is subject to regulatory approval.

Q: Can I use M12 converters with this model?
A: No. The IW9167E-HZ has permanent M25 cable ports and M12 converters are not compatible.

Q: Which SFP modules does it accept?
A: The SFP slot accepts copper modules at 100M/1G/10G and fibre modules at 1G/10G.

Related Products

View all Industrial Access Points

Recently Viewed

  • Request a Quote

    Looking for competitive pricing? Submit a request, and our team will provide a tailored quote that fits your needs.

  • Contact Us Directly

    Have a question or need immediate assistance? Call us for expert advice and real-time support.

    Call us Now  

  • Contact Us Directly

    Have a question or need immediate assistance? Call us for expert advice and real-time support.

    Contact us