-
Vendor:Blue Cable Co
10M Hook and Loop Reusable Cable Tie Roll - Cable Management 10mm Width | Black
CAB-TIE-10mmX10m-BLACK
In stock
Vendor:Blue Cable Co10M Hook and Loop Reusable Cable Tie Roll - Cable Management 10mm Width | Black
Efficiently organise and secure your cables with our Reusable Hook and Loop Velcro Cable Tie's. With a width of 10 mm, they provide strong and flexible fastening. Say goodbye to tangled cords and keep your rack space clutter-free. Perfect for Data Centre and Server Rack use.
Colour: Black
Type: Roll
Width: 10mm (1cm)
Length: 10M
-
Vendor:Blue Cable Co
CAB-3KX-AC-AP | Australian AC Power Cord, 3Pin AU Plug to C15 | 10A | 1.85M
CAB-3KX-AC-AP
In stock
Vendor:Blue Cable CoCAB-3KX-AC-AP | Australian AC Power Cord, 3Pin AU Plug to C15 | 10A | 1.85M
Australian AC Power Cord, 3Pin AU Plug to C15, 10A
Similar to the common "Kettle Cord", but with a cut out notch at the bottom of the connector. This can be used to power Network Devices that require a C15 input connector.
Specifications:
Length: 1.85m
Amps: 10A
Connector A: C15
Connector B: AU 3 Pin (AS/NZ 3112), 10Amp
-
Vendor:Blue Cable Co
One-Click MPO/MTP Fibre Optic Connector Cleaner, Male/Female, 500+ Cleans
CABLE.CLEANER.MPO
In stock
Vendor:Blue Cable CoOne-Click MPO/MTP Fibre Optic Connector Cleaner, Male/Female, 500+ Cleans
Keep your MPO/MTP fibre connections clean and loss-free with this one-click fibre optic connector cleaner. A gentle press cleans the connector face instantly, with an audible click confirming when cleaning is complete. It works with MPO/MTP OM3, OM4, and single-mode APC connectors, and suits both male and female connector types.
- One-click, push-button operation for fast, consistent cleaning
- Compatible with MTP/MPO OM3, OM4, and single-mode (APC) connectors
- Works with both male and female MPO/MTP connectors
- Rated for over 500 cleaning cycles
- Automatic cleaning wire advance to avoid secondary contamination
- 5-year advanced hardware replacement warranty (Blue Cable Co)
-
Vendor:Blue Cable Co
Cable Ties 10cm x 2.5mm | Black | Pack of 100
These 10cm black cable ties are ideal for bundling and securing smaller cable runs, patch leads and general cable management. Sold in a pack of 100.
- Length: 10cm, Width: 2.5mm
- Colour: Black
- Pack of 100
- Suited to cable management and bundling in networking and data cabinets
-
Vendor:Blue Cable Co
Cable Ties 25cm x 3.6mm | Black | Pack of 100
These 25cm black cable ties are ideal for bundling and securing network cabling, patch leads and general cable management. Sold in a pack of 100.
- Length: 25cm, Width: 3.6mm
- Colour: Black
- Pack of 100
- Suited to cable management and bundling in networking and data cabinets
-
Vendor:Blue Cable Co
CPAC-DAC-25G-xM-D-BCC | Checkpoint Compatible SFP28 To SFP28 Copper Direct-Attach 25GBASE-CR1 Cable | 1 to 5M
CPAC-DAC-25G-1M-D-BCC
Stock Status: Enquire
Vendor:Blue Cable CoCPAC-DAC-25G-xM-D-BCC | Checkpoint Compatible SFP28 To SFP28 Copper Direct-Attach 25GBASE-CR1 Cable | 1 to 5M
The CPAC-DAC-25G-xM-D-BCC is a drop-in compatible replacement for the Checkpoint CPAC-DAC-25G-1M-D. This passive copper twinax cable provides plug-and-play connectivity for Checkpoint security appliances with SFP28 ports. - IEEE 802.3by 25GBASE-CR1 and SFF-8402 SFP28 MSA compliance ensures interoperability with standards-compliant 25G Ethernet equipment - SFP28 form factor with 30AWG twinax copper cable delivering 25.78 Gbps data rate for short-reach interconnects up to 5 meters - Available in 1M, 2M, and 5M lengths to support flexible rack and adjacent-rack topologies in data center environments - Passive copper design offers lower power consumption and cost compared to optical solutions for intra-rack connectivity - 0 to 70 degrees C operating temperature range suitable for standard networking environments -
Vendor:Blue Cable Co
CPAC-DAC-10G-xM-D-BCC | Checkpoint Compatible SFP+ to SFP+ DAC Cable, Passive, 10GB, 10GBASE-CU | 1 to 5M
CPAC-DAC-10G-1M-D-BCC
Stock Status: Enquire
Vendor:Blue Cable CoCPAC-DAC-10G-xM-D-BCC | Checkpoint Compatible SFP+ to SFP+ DAC Cable, Passive, 10GB, 10GBASE-CU | 1 to 5M
The CPAC-DAC-10G-xM-D-BCC is a drop-in compatible replacement for the Checkpoint CPAC-DAC-10G-1M-D. This passive twinaxial copper cable assembly provides plug-and-play compatibility with Checkpoint security appliances featuring 10GbE SFP+ ports. - Complies with 10GBASE-CU (IEEE 802.3ae), SFP+ MSA (SFF-8431, SFF-8432) standards, guaranteeing interoperability with Checkpoint platforms and third-party equipment using standard SFP+ interfaces - SFP+ to SFP+ form factor with pre-terminated connectors, 10 Gbps full-duplex electrical signalling over passive twinax copper - 30AWG cable suitable for short-range rack and adjacent-rack interconnects up to 5 meters without active signal conditioning - Available in 1M, 2M, and 5M lengths to accommodate variable inter-equipment spacing in data centre and perimeter security deployments - Operating temperature range 0 to 70 degrees C for standard networking environments -
Vendor:Blue Cable Co
CPAC-TR-25SR-DM-BCC | Checkpoint Compatible 25GB Multi-Mode 100m (25GBASE-SR)
CPAC-TR-25SR-DM-BCC
In stock
Vendor:Blue Cable CoCPAC-TR-25SR-DM-BCC | Checkpoint Compatible 25GB Multi-Mode 100m (25GBASE-SR)
The CPAC-TR-25SR-DM-BCC is a drop-in compatible replacement for the Checkpoint CPAC-TR-25SR-DM. This SFP28 transceiver delivers plug-and-play 25 Gigabit Ethernet connectivity for Checkpoint security appliances with SFP28 ports. - IEEE 802.3by 25GBASE-SR compliance guarantees interoperability with standards-compliant 25GbE infrastructure - SFP28 form factor, 25.78 Gbps data rate, 850 nm VCSEL optical engine, duplex LC connector - 100m reach over OM4 multi-mode fibre, 70m over OM3, with RS-FEC enabled on host - Digital diagnostic monitoring via I2C interface for real-time optical power, temperature, voltage, and bias current - Hot-pluggable design enables installation and removal without appliance downtime - Operates from 0 to 70 degrees C ambient temperature range -
Vendor:Blue Cable Co
CPAC-TR-10T-D-BCC | Checkpoint Compatible 10GB Ethernet RJ45 30m (10GBASE-T)
CPAC-TR-10T-D-BCC
In stock
Vendor:Blue Cable CoCPAC-TR-10T-D-BCC | Checkpoint Compatible 10GB Ethernet RJ45 30m (10GBASE-T)
The CPAC-TR-10T-D-BCC is a drop-in compatible replacement for the Checkpoint CPAC-TR-10T-D. This SFP+ copper transceiver plugs into Check Point Quantum security gateways and provides 10GbE connectivity over standard twisted-pair cabling. - IEEE 802.3an 10GBASE-T compliance guarantees interoperability with any 10GbE copper port - SFP+ form factor, 10Gbps data rate, RJ45 connector, 30m maximum reach over CAT6A or CAT7 cable - Multi-rate auto-negotiation supports 1000BASE-T, 2.5GBASE-T, 5GBASE-T, and 10GBASE-T on a single module - Limited DOM telemetry includes case temperature, supply voltage, and link status (no optical parameters on copper modules) - Hot-swappable design for installation without interrupting adjacent ports - Commercial temperature range 0 to 65 degrees C on 3.3V single supply -
Vendor:Blue Cable Co
CPAC-TR-10LR-D-BCC | Checkpoint Compatible 10GB Single-Mode 10km (10GBASE-LR)
CPAC-TR-10LR-D-BCC
In stock
Vendor:Blue Cable CoCPAC-TR-10LR-D-BCC | Checkpoint Compatible 10GB Single-Mode 10km (10GBASE-LR)
The CPAC-TR-10LR-D-BCC is a drop-in compatible replacement for the Check Point CPAC-TR-10LR-D. This SFP+ transceiver provides plug-and-play operation in Check Point security appliances with 10G SFP+ ports. - Complies with IEEE 802.3ae 10GBASE-LR and SFP+ MSA standards, ensuring interoperability across multi-vendor 10G networks - SFP+ form factor with 10.3125 Gbps data rate over single-mode fiber using 1310nm wavelength via duplex LC connector - Supports link distances up to 10km on standard G.652 single-mode fiber - Digital Diagnostic Monitoring (DDM) support provides real-time access to optical power levels, temperature, bias current, and supply voltage - Hot-swappable design allows installation and removal without powering down the host device - Commercial temperature range operation (0 to 70 degrees C) suitable for data center and enterprise deployments -
Vendor:Blue Cable Co
CPAC-TR-10SR-D-BCC | Checkpoint Compatible 10GB Multi-Mode 300m (10GBASE-SR)
CPAC-TR-10SR-D-BCC
In stock
Vendor:Blue Cable CoCPAC-TR-10SR-D-BCC | Checkpoint Compatible 10GB Multi-Mode 300m (10GBASE-SR)
The CPAC-TR-10SR-D-BCC is a drop-in compatible replacement for the Checkpoint CPAC-TR-10SR-D. This SFP+ transceiver operates plug-and-play in Checkpoint security appliances with 10GbE SFP+ ports. - IEEE 802.3ae 10GBASE-SR compliance guarantees interoperability with standards-compliant 10G Ethernet platforms - SFP+ form factor, 10Gbps data rate, 850nm wavelength, multi-mode fibre (MMF), duplex LC connector - Up to 300m over OM3 MMF (50/125 micron), up to 400m over OM4 MMF - Digital Optical Monitoring (DOM) support via SFF-8472 two-wire interface for real-time diagnostics - Hot-pluggable with 3.3V power supply, Class 1 laser safety, power consumption less than 1W - Compatible with Checkpoint Quantum Security Gateway and Maestro Security appliances supporting SFP+ 10GBase-SR ports -
Vendor:Blue Cable Co
CPAC-TR-10ER-D-BCC | Checkpoint Compatible 10GB Single-Mode ER - 40km (10GBASE-ER)
CPAC-TR-10ER-D-BCC
In stock
Vendor:Blue Cable CoCPAC-TR-10ER-D-BCC | Checkpoint Compatible 10GB Single-Mode ER - 40km (10GBASE-ER)
The CPAC-TR-10ER-D-BCC is a drop-in compatible replacement for the Checkpoint CPAC-TR-10ER-D. This SFP+ transceiver provides plug-and-play operation in Checkpoint security appliances with 10GbE SFP+ ports. - IEEE 802.3ae 10GBASE-ER compliance guarantees interoperability with standards-compliant network equipment - SFP+ form factor supporting 10.3125 Gbps data rate over single-mode fibre at 1550nm wavelength - Maximum reach of 40km over OS2 single-mode fibre with duplex LC connector - Digital Diagnostic Monitoring (DDM) support for real-time parameter visibility - Commercial operating temperature range from 0 to 70 degrees Celsius -
Vendor:Blue Cable Co
CPAC-TR-25LR-D-BCC | Checkpoint Compatible 10GB & 25GB Single-Mode 10km (25GBASE-LR)
CPAC-TR-25LR-D-BCC
In stock
Vendor:Blue Cable CoCPAC-TR-25LR-D-BCC | Checkpoint Compatible 10GB & 25GB Single-Mode 10km (25GBASE-LR)
The CPAC-TR-25LR-D-BCC is a drop-in compatible replacement for the Checkpoint CPAC-TR-25LR-D. This SFP28 transceiver provides plug-and-play compatibility with Checkpoint security appliances equipped with SFP28 interfaces. - IEEE 802.3cc 25GBASE-LR and SFP28 MSA compliance ensures seamless interoperability with Checkpoint platforms - SFP28 form factor supporting dual-rate operation at 25.78 Gbps and 10.31 Gbps over single-mode fiber - 1310nm wavelength transmission with duplex LC connector for 10km reach over SMF G.652 - DDM/DOM support for real-time monitoring of optical parameters including transmit power, receive power, temperature, and bias current - Operating temperature range 0 to 70 degrees C for standard commercial deployment environments - Requires RS-FEC on host ports for full 10km reach at 25G; 10G operation does not require FEC -
Vendor:Blue Cable Co
CPAC-DAC-40G-xM-D-BCC | Checkpoint Compatible QSFP to QSFP Copper DAC Cable, 40GB, 40GBASE-CR4 | 1 to 5M
CPAC-DAC-40G-1M-D-BCC
In stock
Vendor:Blue Cable CoCPAC-DAC-40G-xM-D-BCC | Checkpoint Compatible QSFP to QSFP Copper DAC Cable, 40GB, 40GBASE-CR4 | 1 to 5M
The CPAC-DAC-40G-xM-D-BCC is a drop-in compatible replacement for the Check Point CPAC-DAC-40G-1M-D. This passive copper direct attach cable provides plug-and-play connectivity for Check Point security appliances with QSFP+ ports. - IEEE 802.3ba 40GBASE-CR4 and QSFP+ MSA SFF-8436 compliance guarantee interoperability with any standards-compliant QSFP+ port - QSFP+ to QSFP+ twinaxial copper construction supports four 10Gb/s lanes for 40Gb/s aggregate throughput - 28AWG passive copper design requires no external power and delivers low latency for rack and adjacent rack interconnects - Available in 1M, 2M, and 5M lengths to suit different cabinet depths and aisle cross-connects - Operating case temperature range of 0 to 70 degrees Celsius supports standard data centre environments - Hot-pluggable QSFP+ connectors with latching mechanism for secure, tool-free installation and removal -
Vendor:Blue Cable Co
CPAC-TR-40SR-QSFP100m-D-BCC | Checkpoint Compatible 40GB Multi-Mode 150m (40GBASE-SR4)
CPAC-TR-40SR-QSFP100m-D-BCC
In stock
Vendor:Blue Cable CoCPAC-TR-40SR-QSFP100m-D-BCC | Checkpoint Compatible 40GB Multi-Mode 150m (40GBASE-SR4)
The CPAC-TR-40SR-QSFP100m-D-BCC is a drop-in compatible replacement for the Checkpoint CPAC-TR-40SR-QSFP100m-D. This QSFP+ transceiver provides plug-and-play 40 Gigabit Ethernet connectivity in Checkpoint security appliances with QSFP+ ports. - IEEE 802.3ba 40GBASE-SR4 compliance guarantees interoperability with all standard 40GbE SR4 interfaces - QSFP+ form factor with 4-lane parallel optics, 850nm VCSEL transmitter, MPO-12 connector - Supports 100m over OM3 multi-mode fibre and 150m over OM4 or OM5 multi-mode fibre - Digital optical monitoring (DOM) support via I2C interface for real-time parameter access - Hot-swappable design with commercial temperature range (0 to 70 degrees C) operation - QSFP+ MSA SFF-8436 compliant for mechanical and electrical compatibility -
Vendor:Blue Cable Co
CPAC-TR-40SR-QSFPBiDi-D-BCC | Checkpoint Compatible 40GB Multi-Mode BiDi - 100m (40GBASE-SR-BD)
CPAC-TR-40SR-QSFPBiDi-D-BCC
In stock
Vendor:Blue Cable CoCPAC-TR-40SR-QSFPBiDi-D-BCC | Checkpoint Compatible 40GB Multi-Mode BiDi - 100m (40GBASE-SR-BD)
The CPAC-TR-40SR-QSFPBiDi-D-BCC is a drop-in compatible replacement for the Check Point CPAC-TR-40SR-QSFPBiDi-D. This QSFP+ transceiver delivers plug-and-play compatibility with Check Point security appliances and provides 40 Gigabit Ethernet connectivity over duplex LC multi-mode fibre. - IEEE 802.3ba 40GBASE-SR-BD and QSFP+ MSA SFF-8436 compliance ensure seamless integration with Check Point platforms and standards-based interoperability - Bidirectional transmission using 832nm and 918nm wavelengths over duplex LC multi-mode fibre, supporting 100m on OM3 and 150m on OM4 - Two-lane architecture with 20Gbps per lane bidirectional signaling for 40Gbps aggregate throughput - Hot-swappable QSFP+ form factor with DDM/DOM support for real-time optical diagnostics via I2C interface - Duplex LC connector enables reuse of existing 10G fibre infrastructure for 40G migration without MPO cabling - Operating temperature range 0 to 70 degrees Celsius for standard commercial networking environments
-
Why choose Blue Cable Co from XS Network Tech?
Blue Cable Co® is our in-house brand. Built on the same commitment to quality, fast responses, and a hassle-free experience that XS Network Tech delivers across every product we sell. Trusted by government departments, data centres, and service providers, our cabling and transceivers ship same business day from Sydney. One supplier for hardware and connectivity, with no minimum orders and expert procurement support from quote to delivery.
-
What makes Blue Cable Co® different from generic cabling brands?
Blue Cable Co® is designed and quality-controlled by XS Network Tech, not a generic reseller import. Every product is built to enterprise spec, tested for compatibility with major networking brands, and stocked locally in Sydney for same-day dispatch. Our range covers transceivers, ethernet and fibre cables, power and console cables, AV cables, DAC cables, cable management, and network tools. Includes A 5-Year Advanced Warranty.
-
Are Blue Cable Co transceivers compatible with Cisco, Arista, and other brands?
Yes. Blue Cable Co® fibre transceivers are coded for compatibility with major networking brands including Cisco, Arista, Aruba, Juniper, HPE, Meraki, NVIDIA Dell, Fortinet, Moxa, Palo Alto, and Sophos. Covering both current and end-of-life (EOL) platforms. If you need a transceiver for a specific switch model, get in touch and we'll confirm fit before you order.
