• Cisco Compatible SFP-10G-ER-I-BCC 10GBASE-ER Industrial Transceiver
1 1

Blue Cable Co

SFP-10G-ER-I-BCC | Cisco Compatible 10GB Single-Mode ER - 40km (10GBASE-ER) Rugged / Industrial

SFP-10G-ER-I-BCC

5 in stock

$658.90 inc. GST
$599.00 ex. GST
Sale Sold out
Shipping calculated at checkout.
20-min response

Need a quote or bulk pricing? Answered within 20 minutes, Sydney business hours.

Description

The SFP-10G-ER-I-BCC is a drop-in compatible replacement for the Cisco SFP-10G-ER-I. This industrial-rated SFP+ module operates in extended temperature environments from -40°C to 85°C, making it suitable for outdoor deployments, uncontrolled equipment cabinets, and harsh industrial sites where standard commercial transceivers cannot operate. - Complies with IEEE 802.3ae 10GBASE-ER and supports multirate operation including 10GBASE-EW and OTU2/OTU2e - SFP+ form factor with dual LC connector, 1550nm wavelength, up to 40km reach on standard single-mode fibre (G.652) - Industrial operating temperature range of -40°C to 85°C for deployment in extreme environmental conditions - Digital optical monitoring (DOM) via SFF-8472 MSA provides real-time monitoring of temperature, voltage, bias current, and optical power - Hot-swappable design allows installation and removal without powering down the host device

Features

• IEEE 802.3ae 10GBASE-ER compliance ensures interoperability with standard 10 Gigabit Ethernet infrastructure and guarantees reliable 40km single-mode fibre transmission at 1550nm
• Multirate capability supports 10GBASE-ER, 10GBASE-EW, and OTU2/OTU2e protocols, enabling deployment across Ethernet, optical transport, and WAN-PHY applications
• Industrial temperature rating (-40°C to 85°C) withstands extreme outdoor conditions, roadside cabinets, mining infrastructure, oil and gas installations, and uncontrolled environments where commercial-grade optics fail
• Digital diagnostic monitoring via SFF-8472 MSA enables proactive network management by providing real-time optical power levels, laser bias current, supply voltage, and module temperature for remote monitoring and fault isolation
• Hot-swappable SFP+ form factor allows field replacement without network downtime or chassis power cycling, simplifying maintenance in remote or difficult-access locations
• 1550nm wavelength provides lower attenuation over long fibre spans compared to 1310nm, maximising link budget and supporting extended reach applications up to the 40km design limit on G.652 single-mode fibre

Warranty

5-Year Advanced Warranty on All Blue Cable Co® Products

Blue Cable Co® offers a comprehensive 5-Year Advanced Warranty on all our branded products. Our advanced warranty ensures fast, hassle-free replacements to keep your network running smoothly. If a fault occurs, we’ll deliver a replacement part before you return the faulty item—minimising downtime and giving you complete peace of mind.

Choose Blue Cable Co® for reliable, high-quality network components backed by industry-leading warranty support.

All technical data should be verified on the manufacturer data sheets.

View full details

specs-tabs

Technical Specifications

Also Known As

FAQs

Compatible SFP Selector

Technical Specifications

Brand: Blue Cable Co
BCC SKU: SFP-10G-ER-I-BCC
Compatible Replacement For: SFP-10G-ER-I
Compatibility: Cisco compatible
Lab Testing: Tested in Sydney, Australia
Warranty: 5-year advanced hardware replacement (Blue Cable Co)
Form Factor: SFP+
Data Rate: 10.3125 Gbps (10GBASE-ER, 10GBASE-EW, OTU2/OTU2e)
Wavelength: 1550nm
Fibre Type: Single-Mode (SMF, G.652)
Connector Type: Duplex LC
DOM Support: Yes (SFF-8472)
Standards: IEEE 802.3ae 10GBASE-ER, 10GBASE-EW, OTU2/OTU2e
Max Reach: Up to 40km (per datasheet, subject to fibre and link conditions)
Operating Temperature: -40°C to 85°C (Industrial)

Also Known As

SFP-10G-ER-I=, SFP-10G-ER-I-RF

FAQs

Q: Will this work in place of the Cisco SFP-10G-ER-I?
A: Yes. The SFP-10G-ER-I-BCC is a drop-in replacement for the Cisco SFP-10G-ER-I. It matches the SFP+ form factor, 10.3125 Gbps data rate, 1550nm wavelength, 40km single-mode reach, and industrial temperature rating. It is fully compliant with IEEE 802.3ae 10GBASE-ER and operates plug-and-play in Cisco SFP+ ports that support the original module.

Q: Which Cisco platforms support this module?
A: This module is compatible with Cisco switches, routers, and other networking equipment featuring SFP+ ports that support 10GBASE-ER optics and industrial-rated transceivers. Specific platform compatibility depends on the chassis SFP+ slot specifications and software support for industrial temperature modules. Consult the Cisco 10 Gigabit Ethernet Transceiver Modules Compatibility Matrix for detailed platform and software version requirements.

Q: What fibre type is required for 40km transmission?
A: This module requires standard single-mode fibre conforming to ITU-T G.652 specification (OS1 or OS2). Multimode fibre is not compatible. Achieving the full 40km reach depends on total link loss budget, including fibre attenuation, splice loss, and connector loss. For links shorter than 40km, an inline optical attenuator may be required to prevent receiver overload due to the module's high transmit power at 1550nm.

Q: Can this module operate at both commercial and industrial temperatures?
A: Yes. The industrial temperature range of -40°C to 85°C encompasses the commercial range (0°C to 70°C), so the module operates across both environments. It is designed for cold-start capability at -40°C, meaning the transceiver can initialise in extreme cold conditions. This makes it suitable for deployments where temperature varies widely, such as outdoor enclosures, remote cell sites, or seasonal climate extremes.

Q: Does the 1550nm wavelength affect link budget planning compared to 1310nm optics?
A: Yes. The 1550nm wavelength experiences lower attenuation on G.652 single-mode fibre compared to 1310nm (approximately 0.2 dB/km versus 0.35 dB/km), which is why this module achieves 40km reach. However, chromatic dispersion is higher at 1550nm. Link budget planning must account for both fibre loss and dispersion penalty, especially on longer spans or where fibre quality varies. The module provides sufficient optical budget to tolerate real-world losses within the 40km design limit.

Compatible SFP Selector

Need a Compatible SFP or QSFP Transceiver?

Use the Blue Cable Co Compatible SFP Selector to quickly filter by vendor compatibility, speed, form factor, fibre type, distance and connector and only see options that exist in our range.
Fully tested. No brand-tax. Sydney re-coding available if required.

Find Compatible Transceivers

100% compatible with equipment from major vendors

Coded and tested in our state of the art lab in Sydney

Cisco sfp-10g-sr transceiver module with metallic housing and a white label displaying serial number, model details, and regulatory markings.
Silver-colored sfp-10g-sr-bcc transceiver module with a white label featuring blue and black text, designed for 850nm wavelength optical communication.
Blue Cable Co
Cisco

Tested on real vendor hardware in Sydney

Every Blue Cable Co transceiver is coded for your platform and tested in our Sydney test rack on real vendor switches and firewalls before it ships. We check it is recognised and links up the same way the OEM optic does, so you don't find an "unsupported transceiver" error after it's installed.

Brands tested: Cisco, Meraki, Arista, Aruba, HPE, Juniper, Dell, Fortinet, Palo Alto, Check Point, Sophos, Moxa and NVIDIA. Speeds up to 100Gb.

  • 5 year replacement warranty
  • Sydney stock
  • Re-coding if you need it

Related Products

View all Fibre Optic Transceivers

Related Resources

1/2

  • Request a Quote

    Looking for competitive pricing? Submit a request, and our team will provide a tailored quote that fits your needs.

  • Contact Us Directly

    Have a question or need immediate assistance? Call us for expert advice and real-time support.

    Call us Now  

  • Contact Us Directly

    Have a question or need immediate assistance? Call us for expert advice and real-time support.

    Contact us