-
Vendor:Blue Cable Co
MMA2L20-AR-BCC | NVIDIA Mellanox Compatible 25GB Single-Mode SFP28 10km (25GBASE-LR)
MMA2L20-AR-BCC
In stock
Vendor:Blue Cable CoMMA2L20-AR-BCC | NVIDIA Mellanox Compatible 25GB Single-Mode SFP28 10km (25GBASE-LR)
The MMA2L20-AR-BCC is a Blue Cable Co 25GbE 25GBASE-LR single-mode SFP28 optical transceiver, compatible with NVIDIA Mellanox platforms. Operating at 1310nm with a DFB transmitter and duplex LC connector, it supports link distances of up to 10km over ITU-T G.652.D rated single-mode fibre — making it well suited to inter-building and campus-scale 25G deployments. This plug-and-play module includes SFF-8472 compliant digital diagnostic monitoring (DDM) and is tested in our state-of-the-art lab in Sydney, Australia to ensure NVIDIA Mellanox platform compatibility. Every unit is backed by Blue Cable Co's 5-year advanced hardware replacement warranty.
- Plug-and-play SFP28 form factor — no additional configuration required
- IEEE 802.3cc 25GBASE-LR compliant, 25.78125 Gb/s data rate
- 1310nm DFB transmitter with high-sensitivity PIN receiver
- Single-mode fibre with duplex LC connector
- Up to 10km reach over ITU-T G.652.D rated SMF (per datasheet, depends on fibre and link conditions)
- SFF-8472 compliant digital diagnostic monitoring (DDM) for real-time performance visibility
- Hot-pluggable SFP28 MSA form factor for live insertion without system downtime
- Operating case temperature range: 0°C to +70°C
- Maximum power consumption: 1.0W
- RoHS compliant
- Tested in Blue Cable Co's Sydney lab for NVIDIA Mellanox platform compatibility
- Backed by Blue Cable Co's 5-year advanced hardware replacement warranty
-
Vendor:Blue Cable Co
MMA2P00-AS-BCC | NVIDIA Mellanox Compatible 25GB Multi-Mode SFP28 100m (25GBASE-SR)
MMA2P00-AS-BCC
In stock
Vendor:Blue Cable CoMMA2P00-AS-BCC | NVIDIA Mellanox Compatible 25GB Multi-Mode SFP28 100m (25GBASE-SR)
The MMA2P00-AS-BCC is a Blue Cable Co 25GbE 25GBASE-SR multi-mode SFP28 optical transceiver, compatible with NVIDIA Mellanox platforms. Operating at 850nm with a duplex LC connector, it supports up to 100m on OM4 fibre and up to 70m on OM3 fibre at 25Gb/s. The module also supports 10GBASE-SR operation, offering dual-rate flexibility in mixed-speed environments. This plug-and-play module includes SFF-8472 compliant digital diagnostic monitoring and is tested in our state-of-the-art lab in Sydney, Australia to ensure NVIDIA Mellanox platform compatibility. Every unit is backed by Blue Cable Co's 5-year advanced hardware replacement warranty.
- Plug-and-play SFP28 form factor — no additional configuration required
- IEEE 802.3bm 25GBASE-SR compliant; also supports 10GBASE-SR operation
- 850nm wavelength over multi-mode fibre with duplex LC connector
- Up to 100m on OM4 MMF; up to 70m on OM3 MMF at 25Gb/s (per datasheet, depends on fibre and link conditions)
- Up to 100m on OM3 at 10Gb/s (per datasheet, depends on fibre and link conditions)
- Selectable retiming for both transmit and receive at 25Gb/s
- SFF-8472 compliant digital diagnostic monitoring (DDM) via I2C management interface
- Hot-pluggable design for live insertion without system downtime
- Operating case temperature range: 0°C to +70°C
- Power dissipation: 0.7W typical (with retiming), 0.8W maximum
- RoHS compliant and Class 1 laser safe
- Tested in Blue Cable Co's Sydney lab for NVIDIA Mellanox platform compatibility
- Backed by Blue Cable Co's 5-year advanced hardware replacement warranty
-
Vendor:Blue Cable Co
MFM1T02A-LR-BCC | NVIDIA Mellanox Compatible 10GB Single-Mode SFP+ 10km (10GBASE-LR)
MFM1T02A-LR-BCC
In stock
Vendor:Blue Cable CoMFM1T02A-LR-BCC | NVIDIA Mellanox Compatible 10GB Single-Mode SFP+ 10km (10GBASE-LR)
The MFM1T02A-LR-BCC is a Blue Cable Co 10GbE 10GBASE-LR single-mode SFP+ optical transceiver, compatible with NVIDIA Mellanox platforms. With a duplex LC connector and a maximum link length of 10km, it is well suited to inter-building and campus-scale fibre runs. This plug-and-play module is tested in our state-of-the-art lab in Sydney, Australia to ensure NVIDIA Mellanox platform compatibility, and is backed by Blue Cable Co's 5-year advanced hardware replacement warranty.
- Plug-and-play SFP+ form factor — no additional configuration required
- IEEE 802.3ae 10GBASE-LR compliant, 10.3125 Gb/s data rate
- Single-mode fibre with duplex LC connector
- Maximum link length of 10km (per datasheet, depends on fibre and link conditions)
- Hot-pluggable design for live insertion without system downtime
- Operating case temperature range: 0°C to +70°C
- Maximum power consumption: 1W
- SFF-8431 and SFF-8432 compliant
- RoHS compliant and Class 1 laser safe
- Tested in Blue Cable Co's Sydney lab for NVIDIA Mellanox platform compatibility
- Backed by Blue Cable Co's 5-year advanced hardware replacement warranty
-
Vendor:Blue Cable Co
MFM1T02A-SR-BCC | NVIDIA Mellanox Compatible 10GB Multi-Mode SFP+ 400m (10GBASE-SR)
MFM1T02A-SR-BCC
In stock
Vendor:Blue Cable CoMFM1T02A-SR-BCC | NVIDIA Mellanox Compatible 10GB Multi-Mode SFP+ 400m (10GBASE-SR)
The MFM1T02A-SR-BCC is a Blue Cable Co 10GbE 10GBASE-SR multi-mode SFP+ optical transceiver, compatible with NVIDIA Mellanox platforms. Operating at 850nm with a duplex LC connector, it delivers up to 300m on OM3 fibre and up to 400m on OM4 fibre at 10Gb/s. This plug-and-play module includes SFF-8472 compliant digital diagnostic monitoring (DDM) and is tested in our state-of-the-art lab in Sydney, Australia to ensure NVIDIA Mellanox platform compatibility. Every unit is backed by Blue Cable Co's 5-year advanced hardware replacement warranty.
- Plug-and-play SFP+ form factor — no additional configuration required
- IEEE 802.3ae 10GBASE-SR compliant, up to 10.3125 Gb/s data rate
- 850nm wavelength over multi-mode fibre with duplex LC connector
- Up to 300m on OM3 MMF; up to 400m on OM4 MMF at 10Gb/s (per datasheet, depends on fibre and link conditions)
- SFF-8472 compliant digital diagnostic monitoring (DDM) for real-time performance visibility
- Hot-pluggable design for live insertion without system downtime
- Operating case temperature range: 0°C to +70°C
- Maximum power consumption: 1W
- RoHS compliant and Class 1 laser safe
- Tested in Blue Cable Co's Sydney lab for NVIDIA Mellanox platform compatibility
- Backed by Blue Cable Co's 5-year advanced hardware replacement warranty
-
Vendor:Blue Cable Co
MC3208011-SX-BCC | NVIDIA Mellanox Compatible 1GB Multi-Mode SFP 550m (1000BASE-SX)
MC3208011-SX-BCC
In stock
Vendor:Blue Cable CoMC3208011-SX-BCC | NVIDIA Mellanox Compatible 1GB Multi-Mode SFP 550m (1000BASE-SX)
The MC3208011-SX-BCC is a Blue Cable Co 1GbE multi-mode SFP optical transceiver, compatible with NVIDIA Mellanox platforms. Using an 850nm VCSEL laser transmitter and duplex LC connector, it supports reaches of up to 550m on 50/125um MMF or up to 300m on 62.5/125um MMF. This plug-and-play module is tested in our state-of-the-art lab in Sydney, Australia to verify NVIDIA Mellanox platform compatibility, and is backed by Blue Cable Co's 5-year advanced hardware replacement warranty.
- Plug-and-play SFP form factor — no additional configuration required
- 850nm oxide VCSEL laser transmitter for reliable short-range multi-mode operation
- Up to 550m reach on 50/125um MMF, up to 300m on 62.5/125um MMF (per datasheet, depends on fibre and link conditions)
- Duplex LC connector for standard multi-mode fibre patch leads
- Hot-pluggable design for live insertion without system downtime
- Operating case temperature range: -20°C to +85°C
- Single 3.3V power supply, low power dissipation
- RoHS compliant and lead free
- Tested in Blue Cable Co's Sydney lab for NVIDIA Mellanox platform compatibility
- Backed by Blue Cable Co's 5-year advanced hardware replacement warranty
-
Vendor:Blue Cable Co
MC3208411-T-BCC | NVIDIA Mellanox Compatible 1GB Copper RJ45 SFP 100m (1000BASE-T)
MC3208411-T-BCC
In stock
Vendor:Blue Cable CoMC3208411-T-BCC | NVIDIA Mellanox Compatible 1GB Copper RJ45 SFP 100m (1000BASE-T)
The MC3208411-T-BCC is a Blue Cable Co 1GbE 1000BASE-T copper SFP transceiver, compatible with NVIDIA Mellanox platforms. Designed for Gigabit Ethernet over standard Cat 5 cable at distances up to 100m, this plug-and-play module fits any SFP-equipped host system with an SGMII interface. Each unit is tested in our state-of-the-art lab in Sydney, Australia to ensure compatibility, and is backed by Blue Cable Co's 5-year advanced hardware replacement warranty.
- Plug-and-play SFP form factor — no additional configuration required
- Supports 10/100/1000BASE-T operation over Cat 5 copper cable
- Maximum reach of 100m (per datasheet, depends on cable and link conditions)
- Hot-pluggable design for live insertion without system downtime
- RJ-45 connector for direct connection to standard copper infrastructure
- Operating case temperature range: 0°C to +85°C
- RoHS compliant and lead free
- Fully metallic enclosure for low EMI
- Tested in Sydney, Australia for NVIDIA Mellanox platform compatibility
- Backed by Blue Cable Co's 5-year advanced hardware replacement warranty
-
Vendor:Blue Cable Co
QSFP-100G-B20D4-I-BCC | Cisco Compatible 100GB BiDi Single-Mode 20km (LC Simplex, Downstream)
QSFP-100G-B20D4-I-BCC
Stock Status: Enquire
Vendor:Blue Cable CoQSFP-100G-B20D4-I-BCC | Cisco Compatible 100GB BiDi Single-Mode 20km (LC Simplex, Downstream)
The QSFP-100G-B20D4-I-BCC is a drop-in compatible replacement for the Cisco QSFP-100G-B20D4-I. This transceiver provides plug-and-play 100 Gigabit Ethernet connectivity over a single strand of G.652 single-mode fibre at distances up to 20km on Cisco QSFP28 platforms. - QSFP28 MSA compliance per IEEE 802.3cu (CAUI-4) and SFF-8679 specifications guarantees electrical and physical interoperability with Cisco QSFP 100G ports - 100Gbps over single LC simplex fibre using O-band wavelengths: Tx 1274/1278/1282/1287 nm, Rx 1296/1300/1304/1309 nm - Downstream BiDi unit operating as matched pair with QSFP-100G-B20U4-I upstream transceiver, enabling full-duplex transmission on one fibre strand via diplexer wavelength separation - Four 25Gbps lanes per direction using NRZ modulation over LAN WDM grid spacing, requires host-based RS-FEC for 20km reach - Industrial temperature rating of -40°C cold start and -20°C to +85°C mission mode operation for deployment in environmentally challenging locations - Digital Optical Monitoring (DOM) provides real-time access to transmit power, receive power, temperature, bias current, and supply voltage parameters -
Vendor:Blue Cable Co
QSFP-100G-B20U4-I-BCC | Cisco Compatible 100GB BiDi Single-Mode 20km (LC Simplex, Upstream)
QSFP-100G-B20U4-I-BCC
Stock Status: Enquire
Vendor:Blue Cable CoQSFP-100G-B20U4-I-BCC | Cisco Compatible 100GB BiDi Single-Mode 20km (LC Simplex, Upstream)
The QSFP-100G-B20U4-I-BCC is a drop-in compatible replacement for the Cisco QSFP-100G-B20U4-I. It is plug-and-play in Cisco platforms with QSFP28 100G ports and has been tested in our Sydney lab to ensure compatibility. - QSFP28 form factor delivering 100Gbps over a single strand of G.652 Single-Mode Fiber - Supports up to 20km reach using four transmit wavelengths (1296, 1300, 1304, 1309nm) and four receive wavelengths (1274, 1278, 1282, 1287nm) in the O-band with NRZ modulation - Operates as the upstream unit of a BiDi pair and must be deployed with the downstream counterpart (QSFP-100G-B20D4-I) at the far end - LC Simplex connector enables full-duplex transmission over a single fibre, reducing fibre infrastructure requirements - Requires host-based RS-FEC (Reed Solomon Forward Error Correction) to be enabled on the Cisco platform for correct operation and full 20km reach - Industrial temperature rated from -40°C cold start to +85°C mission mode, suitable for 5G fronthaul and outdoor deployments - DOM (Digital Optical Monitoring) support provides real-time monitoring of optical power, temperature, bias current, and voltage -
Vendor:Blue Cable Co
JL563C-BCC | Aruba Compatible 10GB Ethernet RJ45 30m (10GBASE-T)
JL563C-BCC
In stock
Vendor:Blue Cable CoJL563C-BCC | Aruba Compatible 10GB Ethernet RJ45 30m (10GBASE-T)
The JL563C-BCC is a drop-in compatible replacement for the Aruba JL563C. This SFP+ copper transceiver provides plug-and-play compatibility with Aruba networking platforms. - IEEE 802.3an 10GBASE-T compliant, ensuring interoperability with standards-based 10 Gigabit Ethernet infrastructure - SFP+ form factor with RJ-45 connector, supporting up to 30m reach over Cat6a or Cat7 twisted pair cable - Hot-pluggable design allows installation and removal without powering down the host switch - Operates at fixed 10G speed, does not auto-negotiate to lower data rates - Compliant with SFF-8431 and SFF-8432 MSA specifications for physical and electrical interface standards -
Vendor:Blue Cable Co
JG331A-BCC | Aruba Compatible 40GB QSFP to 4 x 10GB SFP+ Direct Attach Breakout Cable | 5M
JG331A-BCC
Stock Status: Enquire
Vendor:Blue Cable CoJG331A-BCC | Aruba Compatible 40GB QSFP to 4 x 10GB SFP+ Direct Attach Breakout Cable | 5M
The JG331A-BCC is a drop-in compatible replacement for the Aruba JG331A. This passive copper breakout cable provides plug-and-play connectivity in Aruba switches and HPE FlexNetwork platforms requiring a 40G QSFP+ to 4x10G SFP+ interface. - 40GBASE-CR4 compliance ensures seamless operation with any switch or NIC supporting the standard, splitting one 40Gbps QSFP+ port into four independent 10Gbps SFP+ lanes - Each of the four 10G lanes operates independently at 10.3 Gbps per channel over passive twinax copper - QSFP+ MSA (SFF-8436) and SFP+ MSA (SFF-8431) compliant connectors guarantee mechanical and electrical compatibility - Passive construction requires no external power and delivers lower latency than active cables - 5-meter reach suitable for top-of-rack, server-to-switch, and intra-rack interconnects in data centers and enterprise networks - 30AWG twinax cable with 20mm minimum bend radius and 0 to 70°C operating temperature range -
Vendor:Blue Cable Co
ITFZTCHTC-BCC | Sophos Compatible 1GB Ethernet RJ45 100m (1000BASE-T)
ITFZTCHTC-BCC
In stock
Vendor:Blue Cable CoITFZTCHTC-BCC | Sophos Compatible 1GB Ethernet RJ45 100m (1000BASE-T)
The ITFZTCHTC-BCC is a drop-in compatible replacement for the Sophos ITFZTCHTC. This copper SFP transceiver provides plug-and-play 1000BASE-T connectivity for Sophos network equipment with standard SFP ports. - IEEE 802.3ab compliant 1000BASE-T operation guarantees interoperability with Gigabit Ethernet infrastructure over copper - SFP form factor, 1.25 Gbps data rate, RJ45 connector, up to 100m reach over Cat5/Cat5e/Cat6 unshielded twisted-pair cable - Auto-negotiation support for 10/100/1000 Mbps operation ensures backward compatibility with Fast Ethernet and legacy 10BASE-T links - Commercial temperature range (0 to 70°C) suitable for standard networking environments - Hot-swappable design allows module installation and removal without service interruption -
Vendor:Blue Cable Co
ITFZTCHLX-BCC | Sophos Compatible 1GB Single-Mode 10km (1000BASE-LX)
ITFZTCHLX-BCC
In stock
Vendor:Blue Cable CoITFZTCHLX-BCC | Sophos Compatible 1GB Single-Mode 10km (1000BASE-LX)
The ITFZTCHLX-BCC is a drop-in compatible replacement for the Sophos ITFZTCHLX. It delivers plug-and-play compatibility with Sophos UTM, SG, and XG Series firewalls equipped with SFP ports, providing reliable 1000BASE-LX connectivity over single-mode fibre. - Complies with IEEE 802.3z 1000BASE-LX standard, guaranteeing interoperability with existing Gigabit Ethernet infrastructure - SFP form factor with 1.25Gbps data rate, 1310nm wavelength, and 10km reach over single-mode fibre via duplex LC connector - DOM (Digital Optical Monitoring) support for real-time diagnostics of temperature, voltage, transmit power, receive power, and laser bias current - Operating temperature range of 0 to 70 degrees Celsius for reliable performance in standard networking environments - Tested for compatibility with Sophos hardware to ensure seamless integration into UTM, SG, and XG firewall platforms -
Vendor:Blue Cable Co
MA-CBL-100G-xM-BCC | Meraki Compatible QSFP to QSFP Copper Direct-Attach 100GBASE-CR4 Cable | 1 to 5M
MA-CBL-100G-50CM-BCC
Stock Status: Enquire
Vendor:Blue Cable CoMA-CBL-100G-xM-BCC | Meraki Compatible QSFP to QSFP Copper Direct-Attach 100GBASE-CR4 Cable | 1 to 5M
The MA-CBL-100G-xM-BCC is a drop-in compatible replacement for the Meraki MA-CBL-100G-50CM. This passive twinax cable provides plug-and-play compatibility with Meraki MS355 and MS450 switches for high-speed stacking and 100G connectivity. - Complies with IEEE 802.3bj and SFF-8665/SFF-8679 standards, ensuring full 100GBASE-CR4 interoperability - QSFP28 to QSFP28 passive copper twinax construction with 100 Gbps aggregate data rate over 4 independent full-duplex channels - Each channel supports up to 25.8 Gbps data rate for 100G Ethernet applications - Available in 0.5M, 1M, and 3M lengths to accommodate rack-level stacking configurations - Operates from 0 to 70 degrees C with maximum 1.5W power consumption per end on 3.3V supply - Hot-swappable design with RoHS compliance and CE certification -
Vendor:Blue Cable Co
MA-CBL-40G-xM-BCC | Meraki Compatible QSFP to QSFP Copper DAC Cable, 40GB, 40GBASE-CR4 | 0.5 to 3M
MA-CBL-40G-50CM-BCC
Stock Status: Enquire
Vendor:Blue Cable CoMA-CBL-40G-xM-BCC | Meraki Compatible QSFP to QSFP Copper DAC Cable, 40GB, 40GBASE-CR4 | 0.5 to 3M
The MA-CBL-40G-xM-BCC is a drop-in compatible replacement for the Meraki MA-CBL-40G-50CM. This passive copper direct attach cable provides plug-and-play connectivity for Meraki MS-series switches requiring 40G stacking or interconnect. - 40GBASE-CR4 and SFF-8436 compliance guarantees interoperability with standards-compliant 40G QSFP+ ports - QSFP+ to QSFP+ passive twinax copper cable assembly delivering 40Gbps data rate over copper - Suitable for short-range interconnects within and across adjacent equipment racks - Available in three lengths: 0.5M, 1M, and 3M to accommodate varied rack configurations - Hot-pluggable design with low power consumption compared to optical alternatives - Compatible with Meraki MS210, MS225, MS250, MS350, MS410, and MS425 switch families for stacking applications -
Vendor:Blue Cable Co
SFP-1GZXLC-BCC | Moxa Compatible 1GB Single-Mode ZR - 70km (1000BASE-ZX)
SFP-1GZXLC-BCC
In stock
Vendor:Blue Cable CoSFP-1GZXLC-BCC | Moxa Compatible 1GB Single-Mode ZR - 70km (1000BASE-ZX)
The SFP-1GZXLC-BCC is a drop-in compatible replacement for the Moxa SFP-1GZXLC. It works as a plug-and-play solution in Moxa Gigabit Ethernet switches and routers that support 1000BASE-ZX SFP modules. - IEEE 802.3z compliant, ensuring interoperability with any standards-based Gigabit Ethernet network - SFP form factor supporting 1000BASE-ZX at 1550nm wavelength over single-mode fibre with LC duplex connector - Reaches up to 70km over OS1/OS2 single-mode fibre depending on link loss budget - Digital Diagnostic Monitoring (DDM) function provides real-time visibility of transceiver parameters including temperature, voltage, and optical power levels - Hot-swappable design allows installation and removal without interrupting network operations - Operating temperature range of 0 to 60°C suits standard commercial networking environments -
Vendor:Blue Cable Co
SFP-10GZRLC-T-BCC | Moxa Compatible 10GB Single-Mode ZR - 80km (10GBASE-ZR)
SFP-10GZRLC-T-BCC
In stock
Vendor:Blue Cable CoSFP-10GZRLC-T-BCC | Moxa Compatible 10GB Single-Mode ZR - 80km (10GBASE-ZR)
The SFP-10GZRLC-T-BCC is a drop-in compatible replacement for the Moxa SFP-10GZRLC-T. This SFP+ transceiver operates at 1550nm and delivers 10 Gigabit Ethernet connectivity over single-mode fiber at distances up to 80km, making it suitable for extended-reach industrial network deployments. - IEEE 802.3ae compliance ensures interoperability with standard 10 Gigabit Ethernet infrastructure - SFP+ form factor with duplex LC connector, 10GBASE-ZR standard, 1550nm wavelength, 80km reach over SMF - Digital diagnostic monitoring (DDM) function provides real-time access to temperature, voltage, current, and optical power parameters - Hot-pluggable design with -40 to 85°C operating range for harsh industrial environments - SFF-8432 SFP+ MSA compliant for broad platform compatibility across industrial Ethernet switches
-
Why choose Blue Cable Co from XS Network Tech?
Blue Cable Co® is our in-house brand. Built on the same commitment to quality, fast responses, and a hassle-free experience that XS Network Tech delivers across every product we sell. Trusted by government departments, data centres, and service providers, our cabling and transceivers ship same business day from Sydney. One supplier for hardware and connectivity, with no minimum orders and expert procurement support from quote to delivery.
-
What makes Blue Cable Co® different from generic cabling brands?
Blue Cable Co® is designed and quality-controlled by XS Network Tech, not a generic reseller import. Every product is built to enterprise spec, tested for compatibility with major networking brands, and stocked locally in Sydney for same-day dispatch. Our range covers transceivers, ethernet and fibre cables, power and console cables, AV cables, DAC cables, cable management, and network tools. Includes A 5-Year Advanced Warranty.
-
Are Blue Cable Co transceivers compatible with Cisco, Arista, and other brands?
Yes. Blue Cable Co® fibre transceivers are coded for compatibility with major networking brands including Cisco, Arista, Aruba, Juniper, HPE, Meraki, NVIDIA Dell, Fortinet, Moxa, Palo Alto, and Sophos. Covering both current and end-of-life (EOL) platforms. If you need a transceiver for a specific switch model, get in touch and we'll confirm fit before you order.
