-
Vendor:Blue Cable Co
SFP-10G-BX40D-I-BCC | Cisco Compatible 10G Single-Mode 40km (10GBASE-BX40D)
SFP-10G-BX40D-I-BCC
Vendor:Blue Cable CoSFP-10G-BX40D-I-BCC | Cisco Compatible 10G Single-Mode 40km (10GBASE-BX40D)
The SFP-10G-BX40D-I-BCC is a drop-in compatible replacement for the Cisco SFP-10G-BX40D-I. This bidirectional SFP+ transceiver operates plug-and-play in Cisco SFP+ ports, enabling 10 Gigabit Ethernet over a single strand of single-mode fibre. - 10GBASE-BX40-D standard compliance guarantees interoperability with matching upstream BiDi transceivers - SFP+ form factor supporting 10.3125 Gbps data rate over OS2 single-mode fibre up to 40km - Transmits at 1330nm and receives at 1270nm via simplex LC connector - Digital Optical Monitoring (DOM) support per SFF-8472 MSA for real-time diagnostics of optical power, temperature, and bias current - Hot-swappable design allows installation and removal without powering down the host switch or router - Must be deployed in pairs with a complementary upstream transceiver (1270nm TX / 1330nm RX) such as the SFP-10G-BX40U-I -
Vendor:Blue Cable Co
SFP-10G-AOCxM-BCC | Cisco Compatible SFP+ to SFP+ Active Optical Cable, 10GB, 10GBASE-AOC | 1 to 10M
SFP-10G-AOC1M-BCC
In stock
Vendor:Blue Cable CoSFP-10G-AOCxM-BCC | Cisco Compatible SFP+ to SFP+ Active Optical Cable, 10GB, 10GBASE-AOC | 1 to 10M
The SFP-10G-AOCxM-BCC is a drop-in compatible replacement for the Cisco SFP-10G-AOC1M and related length variants. These active optical cables are plug-and-play compatible with Cisco switches, routers, and servers equipped with SFP+ ports. - SFF-8431 MSA compliance guarantees interoperability with any standards-compliant SFP+ host port - SFP+ to SFP+ form factor with 850nm VCSEL optics over internal multi-mode fibre - 10.3125 Gbps data rate supporting 10 Gigabit Ethernet, Fibre Channel, and InfiniBand applications - Digital diagnostic monitoring (DDM) support for real-time temperature, voltage, bias current, and optical power monitoring - Available in 1M, 2M, 3M, 5M, 7M, and 10M lengths for flexible rack and inter-rack connectivity - 0 to 70 degrees C commercial operating temperature range with hot-swappable SFP+ connectors -
Vendor:Blue Cable Co
SFP-100M-FX-BCC | Arista Compatible 100MB Multi-Mode - 2km (100BASE-FX)
SFP-100M-FX-BCC
In stock
Vendor:Blue Cable CoSFP-100M-FX-BCC | Arista Compatible 100MB Multi-Mode - 2km (100BASE-FX)
The SFP-100M-FX-BCC is a drop-in compatible replacement for the Arista SFP-100M-FX. This transceiver provides plug-and-play compatibility with Arista switches and routers supporting 100 Mbps Fast Ethernet over multi-mode fibre. - Compliant with IEEE 802.3 100BASE-FX standard, ensuring interoperability with industry-standard Fast Ethernet infrastructure - 1310nm wavelength transmission over multi-mode fibre with LC duplex connector, supporting link lengths up to 2km - SFP MSA form factor for hot-swappable installation in any MSA-compliant Fast Ethernet port - Digital optical monitoring (DOM) support provides real-time access to optical power levels, temperature, and module diagnostics via SNMP - Low power consumption design (typically under 1W) suitable for dense port deployments in access layer switches -
Vendor:Blue Cable Co
SFP-10/25G-LR-S-BCC | Cisco Compatible 10GB & 25GB Single-Mode 10km (25GBASE-LR)
SFP-10/25G-LR-S-BCC
In stock
Vendor:Blue Cable CoSFP-10/25G-LR-S-BCC | Cisco Compatible 10GB & 25GB Single-Mode 10km (25GBASE-LR)
The SFP-10/25G-LR-S-BCC is a drop-in compatible replacement for the Cisco SFP-10/25G-LR-S. This dual-rate SFP28 transceiver operates at both 10G and 25G over standard single-mode fiber, providing plug-and-play compatibility with Cisco platforms equipped with SFP28 ports. - IEEE 802.3by and 802.3cc compliance guarantees interoperability with any 25GBASE-LR or 10GBASE-LR host interface - SFP28 form factor, dual-rate 10G/25G operation, 1310nm wavelength, 10km reach over G.652 single-mode fiber, duplex LC connector - Requires RS-FEC on host ports for full 25G reach; FEC not required for 10G operation - Digital Optical Monitoring (DOM) support enables real-time tracking of optical power, temperature, bias current, and supply voltage - Hot-swappable design with commercial temperature range (0 to 70 degrees C) for reliable data center and campus backbone deployment -
Vendor:Blue Cable Co
SFP-10/25G-CSR-S-BCC | Cisco Compatible 10/25GB Multi-Mode - 300m (10GBASE-CSR / 25GBASE-CSR)
SFP-10/25G-CSR-S-BCC
Vendor:Blue Cable CoSFP-10/25G-CSR-S-BCC | Cisco Compatible 10/25GB Multi-Mode - 300m (10GBASE-CSR / 25GBASE-CSR)
The SFP-10/25G-CSR-S-BCC is a drop-in compatible replacement for the Cisco SFP-10/25G-CSR-S. This dual-rate SFP28 transceiver provides plug-and-play compatibility with Cisco SFP28 ports, supporting both 10G and 25G operation without hardware changes. - IEEE 802.3by compliance guarantees 25G Ethernet interoperability, with backward compatibility to 10GBASE-CSR - SFP28 form factor, dual-rate 10.3 Gbps and 25.78 Gbps, 850nm VCSEL wavelength, multi-mode fibre - Reach: 300m over OM3, 400m over OM4 at both 10G and 25G, 70m over OM2 at 25G, 82m over OM2 at 10G - RS-FEC required on host ports for full 300m/400m reach at 25G; BASE-R FEC supports 70m/100m over OM3/OM4; no FEC required at 10G - Digital Optical Monitoring (DOM) support via I2C interface for real-time parameter monitoring - LC duplex connector, hot-pluggable, commercial temperature range 0 to 70°C -
Vendor:Blue Cable Co
SFP+ to SFP+ DAC Cable, Passive, 10GB, 10GBASE-CU-BCC | Aruba Compatible 1 to 7 Meter
J9281D-BCC
Vendor:Blue Cable CoSFP+ to SFP+ DAC Cable, Passive, 10GB, 10GBASE-CU-BCC | Aruba Compatible 1 to 7 Meter
The J9281D-BCC is a drop-in compatible replacement for the Aruba J9281D. This passive direct attach copper cable plugs directly into SFP+ ports on Aruba switches and routers without requiring additional transceivers. - 10GBASE-CU compliant passive twinax cable delivering 10 Gigabit Ethernet connectivity - SFP+ to SFP+ connectors with copper twinax cable assembly, supporting data rates from 1.25 to 10.31 Gbps - Available in 1m, 3m, and 7m lengths to suit rack-level and inter-rack connections - Passive design draws less than 0.5W per end, eliminating active signal conditioning and reducing heat in high-density deployments - Compliant with SFP+ MSA SFF-8431 and IEEE 802.3 specifications for guaranteed interoperability - Operating temperature range of 0 to 70 degrees Celsius for standard commercial environments -
Vendor:Blue Cable Co
S3N89A-BCC | Aruba Compatible 100G Single-Mode 10km (100GBASE-LR)
The S3N89A-BCC is a drop-in compatible replacement for the Aruba S3N89A. This QSFP28 transceiver delivers plug-and-play 100GBASE-LR connectivity with Aruba networking platforms equipped with QSFP28 ports. - 100GBASE-LR compliance ensures seamless interoperability with standards-compliant infrastructure - QSFP28 form factor supporting 100 Gigabit Ethernet over single-mode fibre - 1310nm wavelength transmission with 10km maximum reach over SMF - LC duplex connector for reliable fibre optic interface - Digital Optical Monitoring (DOM) support for real-time diagnostics including temperature, voltage, laser bias current, and optical power levels - Hot-swappable design enables installation and removal without service interruption -
Vendor:Blue Cable Co
S3N88A-BCC | Aruba Compatible 100G Single-Mode 500m (100GBASE-DR)
The S3N88A-BCC is a drop-in compatible replacement for the Aruba S3N88A. This QSFP28 transceiver provides plug-and-play 100G connectivity for Aruba network switches and routers supporting the 100GBASE-DR standard. - IEEE 802.3cd 100GBASE-DR compliance ensures full interoperability with Aruba networking platforms - QSFP28 form factor delivers 100G throughput over single-mode fibre at 1310nm wavelength, reaching up to 500m - Single Lambda architecture using PAM4 modulation and onboard FEC for power-efficient 100G over a single wavelength - Digital Optical Monitoring (DOM) support provides real-time access to temperature, voltage, transmit power, receive power, and laser bias current - Hot-swappable LC duplex connector for zero-downtime installation and field replacement - Operates at 103.125 Gbps electrical rate (4x 25.78 Gbps lanes internally converted to 1x100G PAM-4 optical signal) -
Vendor:Blue Cable Co
R9B63A-BCC | Aruba Compatible 100G Single-Mode 2km (100GBASE-FR)
The R9B63A-BCC is a drop-in compatible replacement for the Aruba R9B63A. This QSFP28 transceiver delivers plug-and-play compatibility with Aruba networking platforms requiring 100GBASE-FR connectivity. - Compliant with IEEE 802.3cd 100GBASE-FR1, QSFP28 MSA, and 100G Lambda MSA standards, ensuring interoperability with standards-based networking equipment - QSFP28 form factor with 103.125Gbps data rate over single-mode fibre, using 1310nm wavelength and duplex LC connector for 2km reach - Single-lambda PAM4 modulation transmits 100G over a single wavelength, enabling compatibility with 400GBASE-DR4 breakout applications - Digital diagnostic monitoring (DOM) support via I2C interface provides real-time access to optical power, temperature, voltage, and bias current parameters - 4x25G NRZ electrical interface (OIF CEI-28G-VSR) with onboard Broadcom chipset converting electrical signals to 1x100G PAM4 optical signal - Hot-swappable design with 0 to 70C operating temperature range for standard commercial environments -
Vendor:Blue Cable Co
QSFPP-4X10GE-SR-BCC | Juniper Compatible 40GB Multi-Mode 400m (40GBASE-CSR4)
QSFPP-4X10GE-SR-BCC
In stock
Vendor:Blue Cable CoQSFPP-4X10GE-SR-BCC | Juniper Compatible 40GB Multi-Mode 400m (40GBASE-CSR4)
The QSFPP-4X10GE-SR-BCC is a drop-in compatible replacement for the Juniper QSFPP-4X10GE-SR. It operates as a plug-and-play solution in Juniper EX, QFX, and MX series platforms with 40G QSFP+ ports. - IEEE 802.3ba 40GBASE-SR4 compliance guarantees interoperability with standards-compliant 40G interfaces and supports 4x10GBASE-SR breakout mode - QSFP+ form factor, 40 Gbps aggregate data rate over four 10 Gbps lanes, 850nm VCSEL wavelength, MTP/MPO-12 connector - Multi-mode fibre: up to 400m on OM4, 300m on OM3, 100m on OM2 (subject to fibre quality and link budget) - 4x10G breakout support via MTP-to-LC breakout cable for connectivity to four independent 10GBASE-SR interfaces - Digital diagnostic monitoring (DOM) via I2C interface for real-time access to optical power, temperature, bias current, and voltage parameters - Hot-swappable installation, standard 0 to 70 degrees C operating temperature range -
Vendor:Blue Cable Co
QSFP-H40G-CUxM-BCC | Cisco Compatible QSFP to QSFP Copper DAC Cable, 40GB, 40GBASE-CR4 | 0.5 to 10M
QSFP-H40G-CU0-5M-BCC
Vendor:Blue Cable CoQSFP-H40G-CUxM-BCC | Cisco Compatible QSFP to QSFP Copper DAC Cable, 40GB, 40GBASE-CR4 | 0.5 to 10M
The QSFP-H40G-CUxM-BCC is a drop-in compatible replacement for the Cisco QSFP-H40G-CU series. This passive copper direct-attach cable provides plug-and-play 40 Gigabit connectivity between QSFP+ ports in Cisco switches and routers within racks and across adjacent racks. - IEEE 802.3ba 40GBASE-CR4 and QSFP+ MSA SFF-8436 compliance guarantee interoperability with all standards-compliant 40G QSFP+ equipment - QSFP+ to QSFP+ twinaxial copper assembly supporting 40 Gbps aggregate data rate across four 10G lanes - Passive design in lengths from 0.5 to 5 meters; active copper variants available in 7 and 10 meter lengths for extended reach - Hot-swappable 38-pin QSFP+ form factor with single 3.3V power supply and maximum 1.5W power consumption per end - Cost-effective alternative to optical transceivers and active optical cables for short-reach intra-rack and adjacent-rack connections - Operating temperature range 0 to 70 degrees C, RoHS compliant -
Vendor:Blue Cable Co
QSFP-H40G-AOCxM-BCC | Cisco Compatible QSFP to QSFP Active Optical Cable, 40GB, 40GBASE-AOC | 1 to 30M
QSFP-H40G-AOC1M-BCC
Vendor:Blue Cable CoQSFP-H40G-AOCxM-BCC | Cisco Compatible QSFP to QSFP Active Optical Cable, 40GB, 40GBASE-AOC | 1 to 30M
The QSFP-H40G-AOCxM-BCC is a drop-in compatible replacement for the Cisco QSFP-H40G-AOC series. It is a plug-and-play active optical cable that connects QSFP+ ports for 40 Gigabit Ethernet applications in Cisco switches and routers. - Compliant with SFF-8436 QSFP+ MSA and 40GBASE-AOC specifications, ensuring interoperability with any QSFP+ port supporting 40G active optical interconnects - 40 Gbps aggregate data rate over four parallel 850nm VCSEL lanes on multi-mode fibre - QSFP+ connectors on both ends with hot-swappable design for live installation without network disruption - Available in 10 length options from 1 to 30 metres for flexible intra-rack and rack-to-rack deployment - Low power consumption of 1.5W typical, reducing thermal load in high-density switch environments - Operates over OM3 multi-mode fibre internal to the cable assembly with no separate patch cable required -
Vendor:Blue Cable Co
QSFP-4X10G-LR-S-BCC | Cisco Compatible 40GB Single-Mode Breakout Transceiver - 10km (40GBASE-LR / 4x10GBASE-LR)
QSFP-4X10G-LR-S-BCC
Vendor:Blue Cable CoQSFP-4X10G-LR-S-BCC | Cisco Compatible 40GB Single-Mode Breakout Transceiver - 10km (40GBASE-LR / 4x10GBASE-LR)
The QSFP-4X10G-LR-S-BCC is a drop-in compatible replacement for the Cisco QSFP-4X10G-LR-S. This QSFP+ transceiver delivers plug-and-play compatibility with Cisco platforms supporting 40GBASE-PLR4 interfaces, enabling both native 40G links and 4x10G breakout connectivity. - Compliant with QSFP+ MSA and IEEE 802.3ba 40GBASE-PSM4, guaranteeing seamless interoperability with Cisco infrastructure and 10GBASE-LR interfaces - QSFP+ form factor, 40 Gigabit Ethernet throughput, 1310nm wavelength, up to 10km over G.652 single-mode fiber - MPO-12 female connector with APC interface for 12-fiber parallel optical links or 4x10G breakout mode using parallel to duplex LC breakout cables - Four independent 10 Gbps lanes, each compliant with 10GBASE-LR specifications for guaranteed interoperability when breaking out to four 10G-LR interfaces - Digital Optical Monitoring (DOM) support provides real-time access to operating parameters including optical power, temperature, and voltage - Hot-swappable design with operating temperature range of 0 to 70 degrees Celsius for commercial deployments -
Vendor:Blue Cable Co
QSFP-4X10G-AOCxM-BCC | Cisco Compatible 40GB QSFP to 4 x 10GB SFP+ Active Optical Breakout Cable | 1M to 10M
QSFP-4X10G-AOC1M-BCC
Vendor:Blue Cable CoQSFP-4X10G-AOCxM-BCC | Cisco Compatible 40GB QSFP to 4 x 10GB SFP+ Active Optical Breakout Cable | 1M to 10M
The QSFP-4X10G-AOCxM-BCC is a drop-in compatible replacement for the Cisco QSFP-4X10G-AOC1M. This plug-and-play active optical breakout cable connects one 40G QSFP+ port to four independent 10G SFP+ ports, suitable for Cisco switches and routers requiring 40GbE to 4x10GbE connectivity. - Compliant with IEEE 802.3ba, SFF-8436 (QSFP+), and SFF-8431 (SFP+) standards, guaranteeing interoperability with MSA-compliant host devices - 40Gb/s aggregate bandwidth over multi-mode fiber at 850nm wavelength, splitting into four independent 10.3Gb/s channels - Active optical cable architecture with integrated VCSEL transceivers at both ends, enabling longer reach and lower power consumption than passive copper alternatives - Available in six lengths: 1m, 2m, 3m, 5m, 7m, and 10m to support flexible rack and adjacent-rack deployments - Hot-swappable design for zero-downtime installations in live production environments - Commercial temperature range (0 to 70 degrees C) for datacenter and enterprise applications -
Vendor:Blue Cable Co
QSFP-4SFP25G-CUxM-BCC | Cisco Compatible 100GB QSFP to 4 x 25GB SFP25G Direct Attach Breakout Cable | 1M to 5M
QSFP-4SFP25G-CU1M-BCC
Vendor:Blue Cable CoQSFP-4SFP25G-CUxM-BCC | Cisco Compatible 100GB QSFP to 4 x 25GB SFP25G Direct Attach Breakout Cable | 1M to 5M
The QSFP-4SFP25G-CUxM-BCC is a drop-in compatible replacement for the Cisco QSFP-4SFP25G-CU1M series. This passive copper breakout cable plugs directly into any Cisco 100G QSFP28 port and splits to four independent 25G SFP28 connections. - IEEE 802.3bj compliant 100GBASE-CR4 to 4 x 25GBASE-CR connectivity guarantees interoperability with standards-compliant hosts - 100G QSFP28 to 4 x 25G SFP28 form factor, delivering 103.1 Gb/s aggregate throughput over passive twinax copper - Available in six lengths from 1M to 5M to support flexible rack-to-rack and intra-rack topologies - Passive copper design requires no external power, operates at 0 to 70 degrees C commercial temperature range - Hot-swappable with automatic lane initialization, each of the four 25G lanes operates independently - Maximum power consumption 1.5W per cable end, suitable for high-density switch deployments -
Vendor:Blue Cable Co
QSFP-4SFP10G-CUxM-BCC | Cisco Compatible 40GB QSFP to 4 x 10GB SFP+ Direct Attach Breakout Cable | 1M to 5M
QSFP-4SFP10G-CU1M-BCC
Vendor:Blue Cable CoQSFP-4SFP10G-CUxM-BCC | Cisco Compatible 40GB QSFP to 4 x 10GB SFP+ Direct Attach Breakout Cable | 1M to 5M
The QSFP-4SFP10G-CUxM-BCC is a drop-in compatible replacement for the Cisco QSFP-4SFP10G-CU1M series. This passive copper breakout cable operates over twinaxial cable and requires no additional power, connecting a single 40GB QSFP+ port to four independent 10GB SFP+ ports with plug-and-play compatibility on Cisco platforms. - Compliant with SFF-8436 (QSFP+) and SFF-8431 (SFP+) MSA standards, ensuring interoperability with Cisco equipment and other MSA-compliant hosts - 40GBASE-CR4 to 4x 10GBASE-CU architecture: each SFP+ lane delivers up to 10.3125 Gbps for a total aggregate bandwidth of 41.25 Gbps - Passive copper construction eliminates the need for external power, reducing power consumption and heat generation compared to active solutions - Hot-swappable connectors with latch-release mechanisms enable seamless installation and removal without network downtime - Available in five lengths (1M, 2M, 3M, 4M, 5M) to support flexible rack-to-rack and intra-rack deployments - Protocol-agnostic design supports 40 Gigabit Ethernet, QDR InfiniBand, and Fibre Channel applications
-
Why choose Blue Cable Co from XS Network Tech?
Blue Cable Co® is our in-house brand. Built on the same commitment to quality, fast responses, and a hassle-free experience that XS Network Tech delivers across every product we sell. Trusted by government departments, data centres, and service providers, our cabling and transceivers ship same business day from Sydney. One supplier for hardware and connectivity, with no minimum orders and expert procurement support from quote to delivery.
-
What makes Blue Cable Co® different from generic cabling brands?
Blue Cable Co® is designed and quality-controlled by XS Network Tech, not a generic reseller import. Every product is built to enterprise spec, tested for compatibility with major networking brands, and stocked locally in Sydney for same-day dispatch. Our range covers transceivers, ethernet and fibre cables, power and console cables, AV cables, DAC cables, cable management, and network tools. Includes A 5-Year Advanced Warranty.
-
Are Blue Cable Co transceivers compatible with Cisco, Arista, and other brands?
Yes. Blue Cable Co® fibre transceivers are coded for compatibility with major networking brands including Cisco, Arista, Aruba, Juniper, HPE, Meraki, NVIDIA Dell, Fortinet, Moxa, Palo Alto, and Sophos. Covering both current and end-of-life (EOL) platforms. If you need a transceiver for a specific switch model, get in touch and we'll confirm fit before you order.
