Skip to product information
1 of 1

Meraki

Meraki MG52-HW | MG52 5G SA/NSA Cellular Gateway, Internal Antennas, PoE+

SKU:MG52-HW

Request Quote
Sale Sold out
Shipping calculated at checkout.

Stock Status: Enquire

20-min response

Need a quote or bulk pricing? Answered within 20 minutes, Sydney business hours.

Description

The Meraki MG52 is a cloud-managed 5G Standalone and Non-Standalone Sub-6 cellular gateway built around an LTE Cat20 modem, with internal dipole antennas. It is designed to sit separately from the security appliance so the antenna can be placed where cellular signal is strongest. Typical uses include primary WAN where wired service is unavailable, secondary WAN for failover, an SD-WAN uplink, and a shared high-availability uplink for MX HA pairs.

Passthrough speeds reach 2 Gbps down and 300 Mbps up, or 1.5 Gbps down and 300 Mbps up in NAT mode. Two 2.5 GbE RJ45 ports are provided, one dedicated LAN and one convertible LAN/WAN. Connectivity options include two Nano (4FF) SIM slots and one cloud-managed eSIM. The unit is IP67 rated, with an operating range of -40 to 50 C, and draws a maximum of 16 W from 802.3at PoE+ or DC power. This SKU is the hardware only and operation requires a Meraki cloud-management licence, plus a cellular data plan and SIM or eSIM.

The MG52 works with Meraki MX as well as non-Meraki security appliances, routers and switches over Ethernet. Only genuine Meraki smart antennas are supported for the optional antenna accessories.

Enquire with XS Network Tech for new or used pricing and availability.

Features

- Cloud managed through the Meraki dashboard as a self-configuring cellular gateway
- Dual SIM support plus a cloud-managed eSIM
- Two downstream Ethernet connections, usable for MX HA topologies
- Works with Meraki and non-Meraki security appliances, routers or switches over Ethernet/IP
- Automatic firmware upgrades with scheduling control and extensive API support
- Email, SMS and mobile push alerts, with ping, traceroute, cable testing, link-failure detection and remote packet capture
- Standalone 5G support enables features such as network slicing
- Low idle telemetry use of roughly 6-8 MB per day

Warranty

All products sold by XS Network Tech include a 12-month warranty on both new and used items. Our in-house technical team thoroughly tests used hardware prior to sale to ensure enterprise-grade reliability.

All technical data should be verified on the manufacturer data sheets.

View full details

specs-tabs

Collapsible content

Technical Specifications

FAQs

Technical Specifications

- Cellular technology: 5G SA/NSA Sub-6 with LTE Cat20 modem
- Max data rate, passthrough: 2 Gbps down / 300 Mbps up
- Max data rate, NAT: 1.5 Gbps down / 300 Mbps up
- Antennas: Internal dipole, 4x4 DL MIMO
- LAN interfaces: 1 x dedicated 2.5 GbE RJ45
- Convertible interface: 1 x LAN/WAN 2.5 GbE RJ45
- SIM slots: 2 x Nano (4FF) plus 1 cloud-managed eSIM
- Power input: 802.3at PoE+ or DC (12V/1A, 48-57V DC/0.35A)
- Power load: 16 W maximum
- Dimensions (w x d x h): 173 x 173 x 36.5 mm
- Weight: 560 g
- Operating temperature: -40 to 50 C
- Storage temperature: -30 to 70 C
- Humidity: 5% to 95% non-condensing
- Ingress protection: IP67
- MTBF at 25 C: 1,663,492 hours
- Certifications: PTCRB, RCM, GCF, IC, FCC

FAQs

Q: Does the MG52 need a licence?
A: Yes. It requires a Meraki cloud-management licence for the MG cellular gateway. A cellular data plan and a SIM or eSIM are also needed.

Q: Can I claim it on my Meraki dashboard?
A: Yes. Every Meraki device XS Network Tech supplies can be claimed on your Meraki dashboard.

Q: How is the MG52 powered?
A: It runs from 802.3at PoE+ or from DC power (12V/1A or 48-57V DC/0.35A), with a maximum load of 16 W. The power adapter takes priority over PoE when both are connected. The MA-PWR-30W-XX power adapter and MA-INJ-4 PoE injector are optional accessories.

Q: Does it only work with Meraki MX appliances?
A: No. It connects over Ethernet to Meraki MX as well as non-Meraki security appliances, routers and switches.

Q: What is the difference between the MG52 and the MG52E?
A: The MG52 has internal dipole antennas, while the MG52E uses external antennas (an MA-ANT-C2-B dipole pair).

Q: Which antennas are supported?
A: Only genuine Meraki smart antennas with a reversed RP-SMA connector are supported.

Recently Viewed

  • Request a Quote

    Looking for competitive pricing? Submit a request, and our team will provide a tailored quote that fits your needs.

  • Contact Us Directly

    Have a question or need immediate assistance? Call us for expert advice and real-time support.

    Call us Now  
  • Contact Us Directly

    Have a question or need immediate assistance? Call us for expert advice and real-time support.

    Contact us