-
Vendor:Cisco
Cisco VIC2-4FXO | 4-port FXO voice interface card (VIC2), RJ-11 analog trunks, loop/ground start, requires PVDM DSP, ISR router expansion
Second-generation 4-port FXO (VIC2) voice interface card providing analog PSTN trunk connectivity for voice-enabled ISR routers. Supports loop-start/ground-start signaling, caller ID, and tone detection when paired with router DSP resources. Ideal for PSTN access and analog failover. -
Vendor:Cisco
Cisco VIC2-2FXS | 2x FXS analog ports (RJ-11) | ISR voice gateway module
Two-port FXS voice interface card for connecting analog phones, fax machines, or modems to supported ISR voice gateways. Provides analog line voltage to endpoints; call features and media processing depend on router IOS and DSP resources. -
Vendor:Cisco
Cisco VIC2-2FXO | 2x FXO analog trunk ports (RJ-11) | PSTN/PBX line interface | Caller ID detect, T.38 fax (IOS/DSP dep.) | VIC2 form factor
Provide two FXO analog trunk ports on a compatible voice gateway router to connect to PSTN central office lines or PBX analog extensions. RJ-11 interfaces support caller ID detection and supervisory signaling, with T.38 fax relay or G.711 pass-through available when supported by IOS/DSP. Ideal for branch survivability, analog backup, or integrating legacy telephony with VoIP. -
Vendor:Cisco
Cisco VIC2-2E/M | 2-port E&M analog trunk interface | ISR voice module | RJ-48C
VIC2-2E/M
Vendor:CiscoCisco VIC2-2E/M | 2-port E&M analog trunk interface | ISR voice module | RJ-48C
Two-port E&M voice interface card providing analog trunk connectivity for tie-lines, PBX interconnects, and radio gateways on supported Cisco ISR platforms. Ideal for bridging legacy voice systems into IP-based routing environments. -
Vendor:Cisco
Cisco VIC2-2BRI-NT-TE | Voice VIC | 2x ISDN BRI S/T (NT/TE) | 2B+D/144 Kbps per port | Q.921/Q.931 | RJ-45
VIC2-2BRI-NT-TE
Vendor:CiscoCisco VIC2-2BRI-NT-TE | Voice VIC | 2x ISDN BRI S/T (NT/TE) | 2B+D/144 Kbps per port | Q.921/Q.931 | RJ-45
Two-port ISDN BRI S/T voice interface card selectable per port for NT or TE mode. Ideal for connecting ISDN network trunks (TE) or terminating ISDN BRI endpoints/branch PBXs (NT) on voice-enabled routers. Supports 2B+D signaling with common switch types (ETSI, NI-1). Requires appropriate DSP resources on the host for voice features. -
Vendor:Cisco
Cisco VIC-4FXS-DID | 4x FXS with DID support | Analog station/trunk | Caller ID | Integrated ring generation | RJ-11 | VIC form factor | Requires DSP (PVDM)
Four-port FXS voice interface card with DID support for connecting analog phones, faxes, modems, or DID trunks to your voice gateway. Provides ringing, battery feed, and Caller ID for station ports while enabling DID service on supported configurations. -
Vendor:Cisco
Cisco VIC-4FXO-M2/M3 | 4-port FXO voice interface card, RJ-11 analog trunks, loop/ground start, M2/M3 platform compatibility, requires PVDM DSP, ISR expansion
4-port FXO voice interface card for analog PSTN trunk connectivity on voice-enabled ISR routers. M2/M3 hardware compatibility variant for supported platforms, providing loop-start/ground-start signaling, caller ID, and tone detection when paired with router DSP resources. Suitable for PSTN access and analog fallback. -
Vendor:Cisco
Cisco VIC-4FXO-CAMA | 4-port FXO voice interface card, CAMA/E911, RJ-11 analog trunks, loop/ground start, requires PVDM DSP, ISR router expansion
4-port FXO voice interface card with CAMA/E911 support for direct analog trunking to PSAPs and the PSTN. Provides reliable loop-start/ground-start signaling, caller ID, and tone detection when paired with router DSP resources. Ideal for E911 trunks, PSTN failover, and legacy analog interconnects on voice-enabled ISR routers. -
Vendor:Cisco
Cisco VIC-2FXS | 2x FXS analog station | Ring generation, Caller ID | RJ-11 | VIC form factor | Requires DSP (PVDM)
Two-port FXS voice interface card for connecting analog phones, faxes, or modems to a router-based voice gateway. Provides ringing, battery feed, and Caller ID for reliable analog endpoint integration. -
Vendor:Cisco
Cisco VIC-2FXO-M1 | 2x FXO analog trunk | Loop/ground start, Caller ID | Battery reversal detect | RJ-11 | M1 revision | Requires DSP (PVDM)
Two-port FXO voice interface card for terminating PSTN analog lines (CO/FXO) into your voice gateway. Supports loop-start and ground-start signaling with Caller ID and battery reversal detection on the M1 hardware revision. -
Vendor:Cisco
Cisco VIC-2FXO | 2x FXO analog trunk ports (RJ-11) | PSTN/PBX line interface | Caller ID detect, fax pass-through | VIC form factor
Add two FXO analog trunk ports to a compatible voice-enabled router to integrate PSTN central office lines or PBX analog trunks with your VoIP dial plan. RJ-11 interfaces support caller ID detection and standard supervisory signaling, with G.711 fax pass-through and platform-dependent relay features. Suited for legacy integration and analog backup scenarios. -
Vendor:Cisco
Cisco VIC-2E-M | 2x E&M analog trunk | 2/4-wire, Types I–V | Wink/Immediate/Delay dial | RJ-11 | VIC form factor | Requires DSP (PVDM)
Two-port E&M analog trunk card for connecting PBXs, tie lines, or radio gateways to your router voice gateway. Supports 2- or 4-wire operation and E&M signaling Types I–V with wink, immediate, and delay-dial options. -
Vendor:Cisco
Cisco VIC-2DID | 2-port analog DID voice interface | PBX trunk support | wink/immediate start | requires voice DSP | for 1700/2600/3600/3700 Series
Enable direct inward dialing (DID) analog trunk connectivity for branch voice deployments. This 2-port voice interface terminates DID trunks from a PBX or telco, leveraging router DSP resources for high-quality voice compression and echo control. Ideal for legacy PBX interconnects and migration scenarios on voice-enabled access routers. -
Vendor:Cisco
Cisco VG420-RM-19-2R | 19-inch rack mount kit | 2RU | ears + screws | for VG420 chassis
VG420-RM-19-2R
Vendor:CiscoCisco VG420-RM-19-2R | 19-inch rack mount kit | 2RU | ears + screws | for VG420 chassis
Mounting hardware kit for securing a 2RU VG420 chassis into standard 19-inch equipment racks, providing a clean, secure, and serviceable installation. -
Vendor:Cisco
Cisco VG420-NIM-BLANK | NIM slot blank cover | VG420 chassis filler | Airflow/EMI cover
VG420-NIM-BLANK
Vendor:CiscoCisco VG420-NIM-BLANK | NIM slot blank cover | VG420 chassis filler | Airflow/EMI cover
Blank filler panel for an empty Network Interface Module (NIM) slot on a VG420 chassis, helping maintain proper airflow, cooling efficiency, and EMI compliance when a slot is unpopulated. -
Vendor:Cisco
Cisco VG420-84FXS/6FXO | Analog Voice Gateway | 84 FXS + 6 FXO | SIP/MGCP | T.38 Fax | 2RU rackmount
VG420-84FXS/6FXO
Vendor:CiscoCisco VG420-84FXS/6FXO | Analog Voice Gateway | 84 FXS + 6 FXO | SIP/MGCP | T.38 Fax | 2RU rackmount
Mixed analog gateway with high FXS density plus FXO trunks for PSTN fallback or local break-in/break-out. Ideal for sites transitioning to IP telephony while retaining analog devices and a handful of copper lines.
Why Choose XS Network Tech?
We are a trusted partner for businesses of all sizes, including government departments, data centres, and service providers. Our expert team in sales, logistics, and customer service ensures that your needs are met with speed and precision, from pre-sales consultation to order fulfilment. With a commitment to fast delivery, sustainability, and a wide inventory, XS Network Tech is your go-to source for IT hardware. Trust us for quality, fast responses, and a hassle-free experience every time.