• Cisco WS-C3650-24PWD-S 24-port PoE+ switch with 10G uplinks
1 1

Cisco

Cisco WS-C3650-48TS-S | Catalyst 3650 48-Port Gigabit Switch, 4x 1G SFP, IP Base

WS-C3650-48TS-S

Request Quote
Sale Sold out
Shipping calculated at checkout.

Stock Status: Enquire

20-min response

Need a quote or bulk pricing? Answered within 20 minutes, Sydney business hours.

Description

The Catalyst 3650 48-port Gigabit switch is a 1 RU access-layer switch for campus and branch wiring closets where PoE is not required. It pairs 48 x 10/100/1000 Ethernet ports with 4 x 1G SFP fixed uplinks, and adds integrated wireless controller capability for converged wired and wireless access.

This is the non-PoE, IP Base model with a 250 W AC power supply. It is built on the Cisco UADP ASIC and delivers 176 Gbps of switching capacity and a 77.37 Mpps forwarding rate. It supports optional StackWise-160 stacking at 160 Gbps, 4,094 VLANs and 1,000 SVIs. DRAM is 4 GB and flash is 2 GB. The IP Base feature set covers enterprise Layer 3 routing, routed access, Flexible NetFlow and Smart Operations, and can be upgraded to IP Services with a right-to-use licence.

The four SFP uplink ports accept Cisco 1000BASE-SX, LX, ZX and BX10 SFPs, 100BASE-FX modules and CWDM or DWDM SFPs. Stacking uses the C3650-STACK-KIT and STACK-T2 cables with other 3650 switches running the same feature set.

Enquire with XS Network Tech for new or used pricing and availability.

Features

- Integrated wireless controller capability in mobility agent and mobility controller modes, up to 50 access points and 1000 wireless clients
- Optional StackWise-160 stacking with up to nine switches and stateful switchover
- Cisco UADP ASIC with uniform wired and wireless policy, hierarchical QoS and Flexible NetFlow
- Field-replaceable power supplies and three modular fans
- Energy-Efficient Ethernet support
- Catalyst Smart Operations including Smart Install and Auto Smartports
- Security features including 802.1X, DHCP snooping, DAI, IP Source Guard, port security and ACLs
- IPv4 and IPv6 routing, policy-based routing, VRF-Lite and Embedded Event Manager

Warranty

All products sold by XS Network Tech include a 12-month warranty on both new and used items. Our in-house technical team thoroughly tests used hardware prior to sale to ensure enterprise-grade reliability.

All technical data should be verified on the manufacturer data sheets.

View full details

specs-tabs

Technical Specifications

FAQs

Technical Specifications

- Ports: 48 x 10/100/1000 Ethernet (non-PoE)
- Uplinks: 4 x Gigabit Ethernet SFP, fixed
- Feature set: IP Base
- Power supply: 250 W AC (PWR-C2-250WAC), secondary power supply supported
- PoE budget: None, data-only model
- Switching capacity: 176 Gbps
- Forwarding rate: 77.37 Mpps
- Stacking bandwidth: 160 Gbps (optional StackWise-160)
- MAC addresses: 32,000
- IPv4 routes: 24,000
- VLAN IDs: 4,094
- Switched virtual interfaces: 1,000
- Jumbo frame: 9198 bytes
- DRAM: 4 GB
- Flash: 2 GB
- Form factor: 1 RU
- Dimensions (H x W x D): 4.4 x 44.5 x 44.8 cm
- Weight: 7.21 kg
- Input voltage: 100-240 VAC, 50-60 Hz
- Typical power consumption without PoE: 61.1 W at 0% traffic, 86.4 W at 100% traffic
- Operating temperature: -5 to +45 C up to 1500 m
- Relative humidity: 5% to 96% non-condensing
- MTBF: 527,580 hours

FAQs

Q: Which licence tier does this switch ship with?
A: It ships with the IP Base feature set. It can be upgraded to IP Services through a right-to-use licence. Stacks cannot mix LAN Base, IP Base and IP Services switches.

Q: Does this model support PoE?
A: No. This is a data-only model with no PoE budget. It ships with a 250 W AC power supply and draws roughly 61 to 86 W without a PoE load.

Q: Can I add a second power supply?
A: Yes. A second power supply can be added for redundancy. Supported modules are PWR-C2-250WAC, PWR-C2-640WAC, PWR-C2-1025WAC and PWR-C2-640WDC.

Q: How do I stack this switch?
A: Use the C3650-STACK-KIT with STACK-T2 stacking cables (50 cm, 1 m or 3 m) to join other Catalyst 3650 switches running the same feature set.

Q: What can I fit in the SFP uplink ports?
A: The four SFP ports accept Cisco SFP transceivers including 1000BASE-SX, LX, ZX and BX10, 100BASE-FX and CWDM or DWDM modules.

Q: Does the wireless controller function need extra licences?
A: No access point licence is needed in mobility agent mode. Mobility controller mode requires additional access point licences.

Related Products

View all Enterprise & Campus Switches

Recently Viewed

  • Request a Quote

    Looking for competitive pricing? Submit a request, and our team will provide a tailored quote that fits your needs.

  • Contact Us Directly

    Have a question or need immediate assistance? Call us for expert advice and real-time support.

    Call us Now  

  • Contact Us Directly

    Have a question or need immediate assistance? Call us for expert advice and real-time support.

    Contact us