• Cisco WS-C3650-24PWD-S 24-port PoE+ switch with 10G uplinks
1 1

Cisco

Cisco WS-C3650-48TS-L | Catalyst 3650 48-Port Gigabit Switch, 4x 1G SFP, LAN Base

WS-C3650-48TS-L

POA
POA
POA
Sale Sold out
Taxes included. Shipping calculated at checkout.

Description

The Cisco Catalyst WS-C3650-48TS-L is an enterprise-class stackable access layer switch offering 48 Gigabit Ethernet ports and 4x 1G SFP uplinks with LAN Base feature set. Ideal for campus edge deployments, it delivers comprehensive Layer 2 switching with support for up to 255 VLANs and optional StackWise-160 stacking for up to 9 switches. Built on Cisco UADP ASIC technology, this 1U rackmount switch provides 176 Gbps switching capacity, field-replaceable fans and power supplies, and convergence-ready architecture for modern enterprise networks.

Features

Cisco StackWise-160 technology with optional stacking for up to 9 switches
- Unified Access Data Plane (UADP) ASIC for wired-wireless convergence
- Comprehensive Layer 2 switching: VLANs, STP (802.1D/w/s), 802.1Q trunking
- VLAN support: Up to 255 VLANs with LAN Base feature set
- Energy Efficient Ethernet (EEE) for reduced power consumption
- Quality of Service (QoS): 802.1p CoS, DSCP-based classification
- Security features: 802.1X authentication, port security, DHCP snooping, Dynamic ARP Inspection
- Link aggregation: IEEE 802.3ad LACP support (Layer 2 only on LAN Base)
- IPv4 and IPv6 management support
- Hot-swappable dual redundant power supply support
- Field-replaceable fan modules (3 fans)
- Cisco IOS XE operating system with CLI and web-based management
- SNMP v1/v2c/v3, RMON, and NetFlow Lite monitoring
- Flexible NetFlow (FNF) for traffic analysis and monitoring
- Built-in RJ-45 management port and console port

Warranty

All products sold by XS Network Tech include a 12-month warranty on both new and used items. Our in-house technical team thoroughly tests used hardware prior to sale to ensure enterprise-grade reliability.

All technical data should be verified on the manufacturer data sheets.

View full details

specs-tabs

Technical Specifications

FAQs

Technical Specifications

48x 10/100/1000 Ethernet ports (RJ-45)
- 4x 1G SFP uplink ports
- Switching capacity: 176 Gbps
- Forwarding rate: 77.37 Mpps
- Memory: 4 GB DRAM, 2 GB Flash
- MAC address table: 32,000 entries
- VLAN support: Up to 255 VLANs (LAN Base)
- Optional StackWise-160 stacking: Up to 9 switches, 160 Gbps stack bandwidth
- Form factor: 1U rackmount (44.5 x 44.8 x 4.4 cm)
- Power supply: 250W AC (single, field-replaceable, dual redundant capable)
- Management: Cisco IOS XE, CLI, Web UI, SNMP
- Redundant field-replaceable fans (3 fan modules)
- IEEE standards: 802.1D, 802.1p, 802.1Q, 802.1s, 802.1w, 802.1x, 802.3

FAQs

Q: What is the difference between LAN Base and IP Base feature sets on the Catalyst 3650?
A: LAN Base provides comprehensive Layer 2 switching features with support for up to 255 VLANs, ideal for access layer deployments. IP Base adds Layer 3 routing capabilities, wireless controller functionality, 1K VLAN support, and routed access. Feature sets can be upgraded via RTU licensing.

Q: Can I stack the WS-C3650-48TS-L with other Catalyst 3650 models?
A: Yes, but only with other LAN Base switches. The optional StackWise-160 module supports stacking up to 9 Catalyst 3650 LAN Base switches with 160 Gbps stack bandwidth. You cannot mix LAN Base with IP Base or IP Services switches in the same stack.

Q: Does the WS-C3650-48TS-L support Power over Ethernet?
A: No, the 48TS model is a data-only switch without PoE capability. For PoE+ support, consider the WS-C3650-48PS-L or WS-C3650-48FS-L models which include integrated PoE+ budgets.

Q: What uplink options are available with this model?
A: The WS-C3650-48TS-L includes 4x 1G SFP uplink ports as standard. These uplinks support Gigabit Ethernet SFP transceivers for fiber or copper connectivity to aggregation or core switches.

Q: Is dual power supply redundancy supported?
A: Yes, the switch ships with one 250W AC power supply by default and supports a second field-replaceable power supply for N+1 redundancy. The second power supply can be ordered separately and must be installed in power supply bay 2.

Recently Viewed

  • Request a Quote

    Looking for competitive pricing? Submit a request, and our team will provide a tailored quote that fits your needs.

  • Contact Us Directly

    Have a question or need immediate assistance? Call us for expert advice and real-time support.

    Call us Now  

  • Contact Us Directly

    Have a question or need immediate assistance? Call us for expert advice and real-time support.

    Contact us