-
Vendor:Blue Cable Co
CAB-3KX-AC-AP | Australian AC Power Cord, 3Pin AU Plug to C15 | 10A | 1.85M
CAB-3KX-AC-AP
In stock
Vendor:Blue Cable CoCAB-3KX-AC-AP | Australian AC Power Cord, 3Pin AU Plug to C15 | 10A | 1.85M
Australian AC Power Cord, 3Pin AU Plug to C15, 10A
Similar to the common "Kettle Cord", but with a cut out notch at the bottom of the connector. This can be used to power Network Devices that require a C15 input connector.
Specifications:
Length: 1.85m
Amps: 10A
Connector A: C15
Connector B: AU 3 Pin (AS/NZ 3112), 10Amp
-
Vendor:Cisco
Cisco STACK-T3A-1M | Type 3A StackWise stacking cable, 1 m, for C9300L/C9300LM stack ports
STACK-T3A-1M
In stock
Vendor:CiscoCisco STACK-T3A-1M | Type 3A StackWise stacking cable, 1 m, for C9300L/C9300LM stack ports
1 m Type 3A StackWise stacking cable for forming resilient stacks on C9300L and C9300LM series switches. Designed with secure-latch connectors for dependable backplane links between adjacent units. -
Vendor:Cisco
Cisco STACK-T1-3M | StackWise-480 Type 1 stacking cable | 3 m | passive copper | for C3850/C9300
STACK-T1-3M
Stock Status: Enquire
Vendor:CiscoCisco STACK-T1-3M | StackWise-480 Type 1 stacking cable | 3 m | passive copper | for C3850/C9300
Type 1 passive copper stacking cable for StackWise-480-enabled switches. The 3 m length provides flexibility for cross-rack or longer in-row connections while maintaining maximum stack bandwidth and reliability. -
Vendor:Cisco
Cisco STACK-T1-1M | Stacking cable | Type 1 | 1 m length | High-bandwidth StackWise interconnect | Low-loss copper | Secure latching
STACK-T1-1M
Stock Status: Enquire
Vendor:CiscoCisco STACK-T1-1M | Stacking cable | Type 1 | 1 m length | High-bandwidth StackWise interconnect | Low-loss copper | Secure latching
Purpose-built Type 1 stacking cable for high-throughput, low-latency backplane links between compatible switches. The 1-meter length is ideal for tidy, adjacent-rack or same-rack stacks, delivering dependable bandwidth for resilient stack topologies. Ruggedized construction and positive latching ensure secure, tool-less installation. -
Vendor:Aruba
Aruba JL448A | RJ45-to-DB9 rollover console cable | serial management
JL448A
Stock Status: Enquire
Vendor:ArubaAruba JL448A | RJ45-to-DB9 rollover console cable | serial management
RJ45-to-DB9 console cable for direct serial access to network devices with RJ45 console ports from a PC with a DB9 serial interface. Features rollover pinout for compatibility with common network gear. -
Vendor:HPE
HPE J9883A | Power Cord | 1.9m | IEC C13 to AS/NZS 3112 (Type I) | ANZ plug | IEC 60320
J9883A
Stock Status: Enquire
Vendor:HPEHPE J9883A | Power Cord | 1.9m | IEC C13 to AS/NZS 3112 (Type I) | ANZ plug | IEC 60320
Data center/enterprise AC power cord for Australia/New Zealand with IEC C13 device connector to AS/NZS 3112 Type I wall plug. Suitable for IT equipment such as servers, switches, UPS, and monitors requiring a grounded lead. -
Vendor:Cisco
CAB-SPWR-30CM | Cisco StackPower Cable for C9300, C3850 and C9300-M | 30CM
CAB-SPWR-30CM
In stock
Vendor:CiscoCAB-SPWR-30CM | Cisco StackPower Cable for C9300, C3850 and C9300-M | 30CM
Short-run power-stacking interconnect for tightly stacked switches, enabling shared power and redundancy with minimal cable slack. 30 cm length with dual proprietary StackPower connectors; black. -
Vendor:Cisco
Cisco CAB-C15-ACA | Power Cord | AU AS/NZS 3112 to IEC C15 | 1.8m | High‑temp
CAB-C15-ACA
In stock
Vendor:CiscoCisco CAB-C15-ACA | Power Cord | AU AS/NZS 3112 to IEC C15 | 1.8m | High‑temp
Australian mains power lead with AS/NZS 3112 plug to IEC C15 high‑temperature connector for equipment requiring a C15 (mates with C16 inlet). 1.8 m length provides flexible rack-to-outlet reach. Suitable for AU/NZ regions and IT appliances needing a C15 tail.
-
Vendor:Blue Cable Co
Braided Cable Sleeve 38mm x 1m, Cable Management Wrap, Black
SLEEVE.1M.BLACK
In stock
Vendor:Blue Cable CoBraided Cable Sleeve 38mm x 1m, Cable Management Wrap, Black
Keep your cables tidy and protected with this expandable braided cable sleeve. Made from PET, it bundles multiple cables together into a single neat run, expanding to fit different cable diameters while resisting heat and wear. Supplied in 1m lengths at 38mm diameter, it's easy to cut to size with a hot knife for racks, desks, or under-desk cable runs.
- Expandable braided cable sleeve for bundling and organising multiple cables
- PET construction rated from -50°C to 150°C
- 38mm diameter, supplied in 1m lengths
- ISO and IMDS certified
- 5-year advanced hardware replacement warranty (Blue Cable Co)
-
Vendor:Blue Cable Co
Cable Ties 10cm x 2.5mm | Black | Pack of 100
These 10cm black cable ties are ideal for bundling and securing smaller cable runs, patch leads and general cable management. Sold in a pack of 100.
- Length: 10cm, Width: 2.5mm
- Colour: Black
- Pack of 100
- Suited to cable management and bundling in networking and data cabinets
-
Vendor:Blue Cable Co
Cable Ties 25cm x 3.6mm | Black | Pack of 100
These 25cm black cable ties are ideal for bundling and securing network cabling, patch leads and general cable management. Sold in a pack of 100.
- Length: 25cm, Width: 3.6mm
- Colour: Black
- Pack of 100
- Suited to cable management and bundling in networking and data cabinets
-
Vendor:Arista
Arista H-O400-4Q100-3M-Arista | 400G OSFP to 4x 100G QSFP28 Active Breakout Cable, 3m
H-O400-4Q100-3M-Arista
Stock Status: Enquire
Vendor:AristaArista H-O400-4Q100-3M-Arista | 400G OSFP to 4x 100G QSFP28 Active Breakout Cable, 3m
The Arista H-O400-4Q100-3M-Arista is a 400GBASE-CR8 active copper breakout cable that connects a single 400G OSFP port to four 100G QSFP28 ports over 3 meters. Built-in gearbox technology performs 2x 50G PAM-4 to 4x 25G NRZ conversion at each QSFP28 end, enabling seamless connectivity between 400G and 100G network infrastructure. This cost-effective direct attach cable solution is ideal for short-reach data centre applications including spine-to-leaf connections, server aggregation, and high-density switch deployments. -
Vendor:Arista
Arista H-O400-4Q100-2M-Arista | 400G OSFP to 4x 100G QSFP28 Breakout Cable, 2m
H-O400-4Q100-2M-Arista
Stock Status: Enquire
Vendor:AristaArista H-O400-4Q100-2M-Arista | 400G OSFP to 4x 100G QSFP28 Breakout Cable, 2m
The Arista H-O400-4Q100-2M is a 400GBASE-CR8 OSFP to 4x 100GBASE-CR4 QSFP28 active twinax copper breakout cable designed for high-density data centre environments. This 2-meter cable enables cost-effective connectivity by breaking out a single 400G OSFP port into four 100G QSFP28 connections, ideal for connecting top-of-rack switches to servers or aggregating multiple 100G links. Built-in gearbox technology handles the 2x 50G PAM-4 to 4x 25G NRZ conversion, ensuring seamless interoperability between 400G and 100G infrastructure. -
Vendor:Arista
Arista H-O400-4Q100-1M-Arista | 400G OSFP to 4x 100G QSFP28 Active Breakout Cable, 1m
H-O400-4Q100-1M-Arista
Stock Status: Enquire
Vendor:AristaArista H-O400-4Q100-1M-Arista | 400G OSFP to 4x 100G QSFP28 Active Breakout Cable, 1m
The Arista H-O400-4Q100-1M is a 400GBASE-CR8 active twinax copper breakout cable that connects one 400G OSFP port to four 100GBASE-CR4 QSFP28 ports over a 1-meter length. This cost-effective solution enables seamless 400G to 100G connectivity in data center and high-performance networking environments, ideal for connecting 400G spine switches to 100G leaf switches or servers. The active copper design supports reliable high-speed signaling while reducing power consumption compared to optical alternatives. -
Vendor:Arista
Arista H-D400-4Q100-5M-Arista | 400G QSFP-DD to 4x 100G QSFP28 Active Copper Cable, 5m
H-D400-4Q100-5M-Arista
Stock Status: Enquire
Vendor:AristaArista H-D400-4Q100-5M-Arista | 400G QSFP-DD to 4x 100G QSFP28 Active Copper Cable, 5m
The Arista H-D400-4Q100-5M is a 400GBASE-CR8 active copper breakout cable that connects a single 400G QSFP-DD port to four 100G QSFP28 ports over a 5-meter twinax cable. An integrated gearbox enables conversion from 8x 50G PAM-4 electrical lanes to 4x 25G NRZ lanes per QSFP connector. Ideal for data centre applications requiring flexible 400G-to-100G connectivity within racks or between adjacent rows. -
Vendor:Arista
Arista H-D400-4Q100-3M-Arista | 400G QSFP-DD to 4x 100G Breakout Cable, 3m Active DAC
H-D400-4Q100-3M-Arista
Stock Status: Enquire
Vendor:AristaArista H-D400-4Q100-3M-Arista | 400G QSFP-DD to 4x 100G Breakout Cable, 3m Active DAC
The Arista H-D400-4Q100-3M is a 400GBASE-CR8 active twinax breakout cable designed for high-density data centre connectivity. This 3-metre cable connects a single 400G QSFP-DD port to four 100G QSFP28 ports, enabling efficient bandwidth breakout for spine-leaf architectures and server connectivity. An integrated gearbox converts 8x 50G PAM-4 signals to 4x 25G NRZ per QSFP28 port, ensuring seamless compatibility with legacy 100G infrastructure while delivering cost-effective, low-latency performance.
Why Choose XS Network Tech?
We are a trusted partner for businesses of all sizes, including government departments, data centres, and service providers. Our expert team in sales, logistics, and customer service ensures that your needs are met with speed and precision, from pre-sales consultation to order fulfilment. With a commitment to fast delivery, sustainability, and a wide inventory, XS Network Tech is your go-to source for IT hardware. Trust us for quality, fast responses, and a hassle-free experience every time.