-
Vendor:Cisco
Cisco ACS-1100-RM2-19 | 19in rack + wall mount kit (v2) | 1RU | steel | includes brackets+screws | for 1100 Series ISR
ACS-1100-RM2-19
In stock
Vendor:CiscoCisco ACS-1100-RM2-19 | 19in rack + wall mount kit (v2) | 1RU | steel | includes brackets+screws | for 1100 Series ISR
Flexible mounting kit for 1100 Series routers supporting both 19-inch rack and wall installations. The 1RU steel hardware provides a secure, reliable mount and consistent port access across branch deployments. -
Vendor:Cisco
Cisco ACC-KIT-T1 | 19" Rack Mount Kit for C9200, C9200L, C9300, C9300L, C3650
ACC-KIT-T1
In stock
Vendor:CiscoCisco ACC-KIT-T1 | 19" Rack Mount Kit for C9200, C9200L, C9300, C9300L, C3650
Mount your Cisco access switch cleanly and securely with ACC-KIT-T1, a 19-inch rack mount kit designed for common Catalyst models. This kit includes left and right rack ears plus mounting screws, giving you a stable, professional rack installation in standard 19" network cabinets and server racks.
Built for dependable fitment and easy alignment, these metal brackets are ideal for new installs, rack tidy-ups, and replacement of missing ears on existing switches.
Compatible Cisco switch models
-
Cisco Catalyst C9200
-
Cisco Catalyst C9200L
-
Cisco Catalyst C9300
-
Cisco Catalyst C9300L
-
Cisco Catalyst C3650
-
-
Vendor:Arista
Arista NIM-1QC | AWE-7200R 100G QSFP28 Module, OCP 3.0, Hot-Swappable
The Arista NIM-1QC is a Short Form Factor Network Interface Module that adds a single 100GbE QSFP28 port to Arista AWE-7200R Series Enterprise WAN Routers. OCP 3.0 compliant and hot-swappable, it enables high-speed 100G connectivity expansion without chassis downtime. Compatible with AWE-7230R-4TX-4S-F (2 NIM slots) and AWE-7250R-16S-F (4 NIM slots), it supports a wide range of 100G transceivers, DACs, and AOCs for flexible enterprise WAN and data centre deployments. -
Vendor:Arista
Arista FAN-7021H-RED | High Speed Fan Module for 7200 Series, Front-to-Rear
FAN-7021H-RED
Vendor:AristaArista FAN-7021H-RED | High Speed Fan Module for 7200 Series, Front-to-Rear
The Arista FAN-7021H-RED is a high-speed, front-to-rear airflow fan module designed for Arista 7200 Series enterprise WAN routers and select 7000 Series switches. This hot-swappable cooling module ensures optimal thermal management and system reliability in demanding data center and enterprise environments. It provides configurable airflow for mission-critical routing and switching platforms. -
Vendor:Cisco
Cisco C-NIM-WAN-2X | Catalyst 8000 2-Port 10G SFP+ WAN Module, Layer 3, MACsec
C-NIM-WAN-2X
Vendor:CiscoCisco C-NIM-WAN-2X | Catalyst 8000 2-Port 10G SFP+ WAN Module, Layer 3, MACsec
The Cisco C-NIM-WAN-2X is a 2-port 10 Gigabit Ethernet WAN network interface module designed for Cisco 8000 Series Secure Routers and Catalyst 8300/8200 Series Edge Platforms. It provides flexible 1GE or 10GE connectivity through two SFP+ ports, delivering high-bandwidth Layer 3 WAN expansion with full feature parity to embedded router ports. Ideal for enterprises requiring scalable WAN capacity, SD-WAN deployments, and secure Metro Ethernet connectivity with 256-bit WAN MACsec encryption. -
Vendor:Cisco
Cisco C-NIM-WAN-4S | Cisco 8000 Series Secure Routers 4-Port Gigabit SFP WAN Module, 256-bit MACsec
C-NIM-WAN-4S
Vendor:CiscoCisco C-NIM-WAN-4S | Cisco 8000 Series Secure Routers 4-Port Gigabit SFP WAN Module, 256-bit MACsec
The Cisco C-NIM-WAN-4S is a Layer 3 WAN network interface module designed for the Cisco 8000 Series Secure Routers. It delivers four 1 Gigabit SFP ports supporting 100BASE-FX and 1000BASE-X fiber connections with 256-bit WAN MACsec encryption. Ideal for enterprises seeking to expand WAN capacity, bandwidth aggregation, or link redundancy with advanced security and SD-WAN intelligence. -
Vendor:Cisco
Cisco C-SM-40T8M2X Catalyst 8000 SM-Based Switching Module, 50 Ports, 40x 1G RJ45, 8x 2.5G Multigigabit, 2x 10G SFP+, Non-PoE
The Cisco C-SM-40T8M2X is a double-wide switching module for Cisco Catalyst 8300 Series Edge Platforms. It adds integrated branch LAN switching to the router, helping consolidate LAN and WAN services into a single platform.
This module provides 50 total ports, including 40 x 1G RJ45 ports, 8 x 2.5G Multigigabit RJ45 ports, and 2 x 10G SFP+ uplinks. The SFP+ uplink ports support either 1G SFP or 10G SFP+ operation, giving flexibility for fibre uplinks, aggregation, or server connectivity.
Based on Cisco naming and channel listings, the C-SM-40T8M2X is the non-PoE version of the 40-port double-wide switching module. It is well suited to branch deployments that need dense copper access and multigigabit capability, but do not require PoE power delivery.
The Catalyst 8000 SM-based switching architecture supports enterprise-class branch features including Layer 2 switching, VLANs, EtherChannel, LACP, PAgP, 802.1X device authentication, Cisco TrustSec, and 128-bit MACsec. It also uses the host Catalyst 8300 platform and integrates with Cisco IOS XE for simplified management through a single platform.
-
Vendor:Cisco
Cisco C-SM-40P8M2X Catalyst 8000 SM-Based Switching Module, 50 Ports, 40x 1G RJ45, 8x 2.5G Multigigabit, 2x 10G SFP+
The Cisco C-SM-40P8M2X is a double-wide switching module designed for Cisco Catalyst 8300 Series Edge Platforms. It adds integrated LAN switching to the router, helping consolidate branch WAN and LAN services into a single platform.
This module provides 50 total ports, including 40 x 1G RJ45 ports, 8 x 2.5G Multigigabit RJ45 ports, and 2 x 10G SFP+ uplinks. The SFP+ uplink ports support either 1G SFP or 10G SFP+ operation, giving added flexibility for high speed uplinks, server connectivity, or aggregation.
The C-SM-40P8M2X supports enterprise switching features including Layer 2 switching, VLANs, EtherChannel, LACP, PAgP, 802.1X device authentication, TrustSec, and 128-bit MACsec. It also supports PoE, PoE+, and UPOE on copper ports, with up to 8 copper interfaces supporting UPOE, subject to host platform power configuration.
Built for branch deployments, the module uses the host Catalyst 8300 platform power system and provides local line-rate switching with high speed internal connectivity to the router forwarding plane. It is well suited to branch offices needing integrated switching, access point uplinks, IP phones, security devices, and high speed fibre uplinks in a single chassis.
-
Vendor:Cisco
Cisco Catalyst Edge SM C-SM-16T4M2X | 16 x 1G + 4 x 2.5G mGig + 2 x 10G SFP+ | Switch Service Module
C-SM-16T4M2X
Vendor:CiscoCisco Catalyst Edge SM C-SM-16T4M2X | 16 x 1G + 4 x 2.5G mGig + 2 x 10G SFP+ | Switch Service Module
Cisco C-SM-16T4M2X is a Catalyst Edge Switch Service Module (SM) designed for Cisco Catalyst 8300 Series Edge Platforms, adding integrated branch switching with a mix of 1GbE, 2.5GbE Multigigabit and 10GbE uplinks.
- Downlinks: 16 x 1GbE RJ45 plus 4 x 2.5GbE Multigigabit RJ45
- Uplinks: 2 x 10GbE SFP+
- Use case: branch switching integrated into the Catalyst 8300 platform
Note: This is the non-PoE “T” variant of the 16-port SM family. Confirm IOS XE minimum version and platform compatibility for your specific Catalyst 8300 chassis before deployment.
-
Vendor:Cisco
Cisco C-SM-16P4M2X | Catalyst 8000 SM Switch Module | 16 x 1G + 4 x 2.5G mGig PoE + 2 x 10G SFP+
C-SM-16P4M2X
Vendor:CiscoCisco C-SM-16P4M2X | Catalyst 8000 SM Switch Module | 16 x 1G + 4 x 2.5G mGig PoE + 2 x 10G SFP+
Cisco C-SM-16P4M2X is a Catalyst 8000 SM-based Layer 2 switching module built for Cisco Catalyst 8300 Series Edge Platforms. It adds integrated branch switching with Multigigabit access ports, PoE, and 10G fibre uplinks, all managed under the same IOS XE software base as the host platform.
- Downlinks: 16 x 1GbE RJ45 plus 4 x 2.5GbE Multigigabit RJ45
- Uplinks: 2 x 10GbE SFP+
- PoE: PoE, PoE+, and UPOE supported (host power dependent)
- ASIC: UADP 2.0 mini based switching
- Security: 802.1X and AES-128 MACsec support (feature dependent)
Ideal for branch-in-a-box deployments where you want WAN routing and enterprise switching in a single chassis.
-
Vendor:Aruba
Aruba R4Y93A | LTE outdoor extender kit, dual LTE MIMO + GPS antennas, 35 ft leads; SD-WAN/LTE
Extend cellular signal reach to improve WAN failover or primary LTE performance for branch gateways. This outdoor-rated kit places LTE and GPS antennas where reception is strongest and brings signal indoors via 35 ft low-loss cabling for reliable modem connectivity. Ideal for SD-WAN edge deployments where indoor LTE coverage is weak or obstructed. Includes outdoor antennas, mounting hardware, and pre-terminated coax leads for a clean, quick install. -
Vendor:HPE
HPE JH294A | E1 G.703 RJ45‑to‑2xBNC 75Ω cable, 3 m, for coax E1 WAN
Adapter cable converting an E1 RJ45 interface to dual BNC 75‑ohm connectors for coaxial E1 services. Ideal for connecting router E1 ports to carrier 75Ω G.703 circuits over short distances within racks or wiring closets. -
Vendor:HPE
HPE JH172A | MSR HMIM: 8x E1/T1 (fractional), RJ-48C, channelized Nx64K WAN, data/voice-ready
Eight-port HMIM module for MSR routers that provides E1 and T1 connectivity with full channelization for fractional Nx64K services. It enables cost-effective WAN access and interworking for sites retaining TDM circuits while moving toward converged IP networks. -
Vendor:HPE
HPE JH169A | MSR HMIM: 8x E1/CE1/T1/CT1 (PRI), RJ-48C, channelized WAN/voice, fractional Nx64K, ISDN PRI capable
High-density HMIM for MSR routers delivering eight ports of TDM circuits for branch or edge integration. It supports E1/CE1 and T1/CT1 operation with channelization for fractional Nx64K services, enabling both data WAN connectivity and ISDN PRI for voice trunks. Ideal for mixed legacy TDM and IP environments migrating to converged networks. -
Vendor:HPE
HPE JH137A | FlexNetwork 6600 FIP-240 flexible interface platform, 240 G fabric capacity, multi-FIC hosting, hot-insert capable on supported chassis
Flexible Interface Platform for 6600 routers, providing a high-bandwidth carrier to host multiple interface cards. It increases slot density and aggregate throughput with a 240 G class fabric, enabling a mix of WAN/LAN interfaces on the same platform. Designed for scalable service edge deployments with simplified lifecycle management through the chassis control plane. -
Vendor:HPE
HPE JH075A | HSR6800 router main processing unit (RSE-X3), control/forwarding engine, carrier-grade HA, IPv4/IPv6/MPLS, Comware OS
Main control and routing engine for HSR6800 chassis, delivering high-performance IPv4/IPv6 forwarding and full-service edge capabilities. It consolidates control, route processing, and management, enabling carrier-grade high availability with redundant MPUs and fast convergence. Ideal for large enterprise and service provider cores needing scalable MPLS VPN, advanced routing, and rich OAM with centralized management under Comware.
Why Choose XS Network Tech?
We are a trusted partner for businesses of all sizes, including government departments, data centres, and service providers. Our expert team in sales, logistics, and customer service ensures that your needs are met with speed and precision, from pre-sales consultation to order fulfilment. With a commitment to fast delivery, sustainability, and a wide inventory, XS Network Tech is your go-to source for IT hardware. Trust us for quality, fast responses, and a hassle-free experience every time.