-
Vendor:HPE
HPE JG737A | MSR SIC 4x enhanced synchronous serial (sync/async) WAN module
Adds four high‑performance synchronous/asynchronous serial interfaces to modular MSR routers using the SIC slot. Ideal for legacy WAN connections, SCADA, industrial, or specialized serial backhaul, with flexible cabling options to common serial standards and support for PPP/HDLC encapsulations. -
Vendor:HPE
HPE JG426A | MSR HMIM 24x 10/100/1000Base-T switch module, Layer2, non-PoE
Expand MSR chassis with 24 additional Gigabit Ethernet RJ45 switch ports. This HMIM form-factor module delivers Layer 2 switching with VLAN, link aggregation, and spanning tree capabilities, ideal for branch aggregation and LAN extension inside modular MSR routers. It is a non-PoE switching module designed for MSR platforms that support HMIM slots. -
Vendor:HPE
HPE JG422A | 8x 1GbE RJ-45 HMIM module, 10/100/1000 autosensing, non-PoE, MSR4000 compatible
An HMIM expansion module that adds eight copper Gigabit Ethernet ports to modular services routers in the MSR4000 family. Ideal for high-density LAN aggregation or routed access, it supports auto-negotiation and auto MDI/MDIX for seamless deployment. The module integrates with the chassis operating system for VLANs, link aggregation, QoS, and monitoring consistent with platform capabilities. Designed for reliability with line-rate forwarding and simple installation. -
Vendor:HPE
HPE JG335A | HSR6800 1200W AC PSU | hot-swappable | 100–240V, 50/60Hz | redundant PSU-ready
1200W hot‑swappable AC power supply for HSR6800 series routers, enabling resilient power architectures with 1+1 or N+1 redundancy. Supports global input voltages and integrates with chassis power management for live insertion and simplified serviceability. -
Vendor:Cisco
Cisco WP-WIFI6-EWC-Z | Wi‑Fi 6 (802.11ax) dual‑band 2.4/5 GHz, EWC-capable pluggable router module
WP-WIFI6-EWC-Z
Vendor:CiscoCisco WP-WIFI6-EWC-Z | Wi‑Fi 6 (802.11ax) dual‑band 2.4/5 GHz, EWC-capable pluggable router module
Add high-efficiency Wi‑Fi 6 to compatible IoT routers with a compact pluggable module that supports dual‑band operation and Embedded Wireless Controller (EWC) functionality for small to medium deployments without an external controller. Ideal for industrial/edge use cases requiring local WLAN access or wireless backhaul, with enterprise security and centralized management through the router/EWC. -
Vendor:Cisco
Cisco VWIC3-4MFT-T1-E1 | 4x T1/E1 MFT RJ-48C, Nx64k channelized, ISDN PRI/PPP/FR; T1 ESF/B8ZS | E1 CRC4/HDB3; EHWIC for ISR G2
Add four flexible T1/E1 trunks to ISR G2 routers with a third‑gen Multiflex Trunk card. Use for data (PPP/Frame Relay/HDLC) or voice (ISDN PRI/CAS) with channelized Nx64 kbps services and robust clocking options. Designed for reliable branch WAN and voice trunk aggregation in a single slot. -
Vendor:Cisco
Cisco VWIC3-2MFT-T1-E1 | 2xT1/E1 Multiflex Trunk (MFT) Voice/WAN Interface Card | Channelized | Data/Voice
VWIC3-2MFT-T1-E1
Vendor:CiscoCisco VWIC3-2MFT-T1-E1 | 2xT1/E1 Multiflex Trunk (MFT) Voice/WAN Interface Card | Channelized | Data/Voice
Dual-port T1/E1 Multiflex Trunk interface card adding flexible voice and data WAN connectivity to compatible ISR platforms. Supports channelized operation for PRI/CAS, data framing, and clocking options, enabling branch voice trunks or routed WAN services. Ideal for PSTN interconnect, PBX integration, or legacy TDM WAN migration scenarios. -
Vendor:Cisco
Cisco VWIC3-2MFT-G703 | 2x E1 G.703 MFT, 2.048 Mbps unframed/framed (G.704), Nx64k, RJ-45 120Ω; PRI/PPP/FR; EHWIC for ISR G2
Dual-port G.703 E1 Multiflex Trunk card providing two independent E1 circuits for ISR G2 routers. Leverage unframed (G.703) or framed (G.704) operation for data and voice, enabling resilient leased-line backhaul and ISDN PRI with channelized Nx64 kbps granularity. -
Vendor:Cisco
Cisco VWIC3-1MFT-T1-E1 | 1-port T1/E1 multiflex VWIC, RJ-48C, integrated CSU/DSU, channelized 24/31 DS0, PRI-capable
VWIC3-1MFT-T1-E1
Vendor:CiscoCisco VWIC3-1MFT-T1-E1 | 1-port T1/E1 multiflex VWIC, RJ-48C, integrated CSU/DSU, channelized 24/31 DS0, PRI-capable
Single-port T1/E1 multiflex interface for WAN access and digital voice, offering integrated CSU/DSU, channelized operation, and flexible clocking. Supports configuration as T1 or E1 via software for data or PRI applications on compatible routers with EHWIC/VWIC3 slots. -
Vendor:Cisco
Cisco VWIC3-1MFT-G703 | 1x E1 G.703 MFT, 2.048 Mbps unframed/framed (G.704), Nx64k, RJ-45 120Ω; PRI/PPP/FR; EHWIC for ISR G2
Single-port G.703 E1 Multiflex Trunk card for ISR G2 routers, supporting unframed (G.703) and framed (G.704) E1 operation. Ideal for leased-line backhaul, PRI, and channelized Nx64 kbps services with flexible data and voice capabilities. -
Vendor:Cisco
Cisco VIC3-4FXS-DID | 4x FXS/DID analog ports (RJ-11) | Caller ID, T.38 fax (IOS/DSP dep.) | Echo cancel | VIC3 form factor
Add four FXS/DID analog ports to a compatible voice gateway router to connect analog phones, fax machines, or PBX trunks with direct-inward-dial capability. RJ-11 interfaces provide battery feed and ring generation for FXS endpoints, with caller ID support and T.38 fax relay or G.711 pass-through (IOS/DSP dependent). Third‑generation VIC3 hardware offers improved timing and echo performance for reliable enterprise voice deployments. -
Vendor:Cisco
Cisco VIC3-2FXS-E-DID | 2‑port FXS/E with DID voice interface card | RJ‑11, caller ID, battery reversal, T.38/fax relay
VIC3-2FXS-E-DID
Vendor:CiscoCisco VIC3-2FXS-E-DID | 2‑port FXS/E with DID voice interface card | RJ‑11, caller ID, battery reversal, T.38/fax relay
Provide two enhanced FXS ports with DID capability for analog stations or trunks. This interface card supports caller ID, battery reversal for metering, and loop‑start signaling, with platform‑dependent SIP/MGCP/H.323 integration and T.38 fax relay. Ideal for connecting analog phones, faxes, modems, or PBX trunks to IP telephony systems. -
Vendor:Cisco
Cisco VIC3-2FXS-DID | 2x FXS/DID analog ports (RJ-11) | Caller ID, T.38 fax (IOS/DSP dep.) | Echo cancel | VIC3 form factor
Add two FXS/DID analog ports to a compatible voice gateway router for connecting analog phones, fax machines, or DID trunks. Provides RJ-11 interfaces with battery feed and ring generation, caller ID support, and T.38 fax relay or G.711 pass-through (IOS/DSP dependent). The VIC3 hardware generation enhances echo and clocking performance for dependable branch telephony. -
Vendor:Cisco
Cisco VIC3-2E-M | 2x E&M analog trunk ports (RJ-48), Type I–V selectable | ISR voice gateway module
Two-port E&M voice/fax interface card for connecting analog tie-lines to PBXs, radio systems, or legacy voice infrastructure on supported ISR platforms. Supports multiple E&M signaling types and 2- or 4-wire audio paths; media features depend on router IOS and DSP resources. -
Vendor:Cisco
Cisco VIC2-4FXO | 4-port FXO voice interface card (VIC2), RJ-11 analog trunks, loop/ground start, requires PVDM DSP, ISR router expansion
Second-generation 4-port FXO (VIC2) voice interface card providing analog PSTN trunk connectivity for voice-enabled ISR routers. Supports loop-start/ground-start signaling, caller ID, and tone detection when paired with router DSP resources. Ideal for PSTN access and analog failover. -
Vendor:Cisco
Cisco VG420-RM-19-2R | 19-inch rack mount kit | 2RU | ears + screws | for VG420 chassis
VG420-RM-19-2R
Vendor:CiscoCisco VG420-RM-19-2R | 19-inch rack mount kit | 2RU | ears + screws | for VG420 chassis
Mounting hardware kit for securing a 2RU VG420 chassis into standard 19-inch equipment racks, providing a clean, secure, and serviceable installation.
Why Choose XS Network Tech?
We are a trusted partner for businesses of all sizes, including government departments, data centres, and service providers. Our expert team in sales, logistics, and customer service ensures that your needs are met with speed and precision, from pre-sales consultation to order fulfilment. With a commitment to fast delivery, sustainability, and a wide inventory, XS Network Tech is your go-to source for IT hardware. Trust us for quality, fast responses, and a hassle-free experience every time.