-
Vendor:Aruba
Aruba R4Y93A | LTE outdoor extender kit, dual LTE MIMO + GPS antennas, 35 ft leads; SD-WAN/LTE
Extend cellular signal reach to improve WAN failover or primary LTE performance for branch gateways. This outdoor-rated kit places LTE and GPS antennas where reception is strongest and brings signal indoors via 35 ft low-loss cabling for reliable modem connectivity. Ideal for SD-WAN edge deployments where indoor LTE coverage is weak or obstructed. Includes outdoor antennas, mounting hardware, and pre-terminated coax leads for a clean, quick install. -
Vendor:Cisco
Cisco PWR-2500-AC | AC 100–240V internal PSU | for 2500 Series | auto‑ranging | IEC C14 inlet
PWR-2500-AC
Vendor:CiscoCisco PWR-2500-AC | AC 100–240V internal PSU | for 2500 Series | auto‑ranging | IEC C14 inlet
Internal AC power supply module designed for 2500 Series platforms. Auto‑ranging input supports global mains voltages for reliable, continuous operation. -
Vendor:HPE
HPE JH294A | E1 G.703 RJ45‑to‑2xBNC 75Ω cable, 3 m, for coax E1 WAN
Adapter cable converting an E1 RJ45 interface to dual BNC 75‑ohm connectors for coaxial E1 services. Ideal for connecting router E1 ports to carrier 75Ω G.703 circuits over short distances within racks or wiring closets. -
Vendor:HPE
HPE JH172A | MSR HMIM: 8x E1/T1 (fractional), RJ-48C, channelized Nx64K WAN, data/voice-ready
Eight-port HMIM module for MSR routers that provides E1 and T1 connectivity with full channelization for fractional Nx64K services. It enables cost-effective WAN access and interworking for sites retaining TDM circuits while moving toward converged IP networks. -
Vendor:HPE
HPE JH169A | MSR HMIM: 8x E1/CE1/T1/CT1 (PRI), RJ-48C, channelized WAN/voice, fractional Nx64K, ISDN PRI capable
High-density HMIM for MSR routers delivering eight ports of TDM circuits for branch or edge integration. It supports E1/CE1 and T1/CT1 operation with channelization for fractional Nx64K services, enabling both data WAN connectivity and ISDN PRI for voice trunks. Ideal for mixed legacy TDM and IP environments migrating to converged networks. -
Vendor:HPE
HPE JH137A | FlexNetwork 6600 FIP-240 flexible interface platform, 240 G fabric capacity, multi-FIC hosting, hot-insert capable on supported chassis
Flexible Interface Platform for 6600 routers, providing a high-bandwidth carrier to host multiple interface cards. It increases slot density and aggregate throughput with a 240 G class fabric, enabling a mix of WAN/LAN interfaces on the same platform. Designed for scalable service edge deployments with simplified lifecycle management through the chassis control plane. -
Vendor:HPE
HPE JH075A | HSR6800 router main processing unit (RSE-X3), control/forwarding engine, carrier-grade HA, IPv4/IPv6/MPLS, Comware OS
Main control and routing engine for HSR6800 chassis, delivering high-performance IPv4/IPv6 forwarding and full-service edge capabilities. It consolidates control, route processing, and management, enabling carrier-grade high availability with redundant MPUs and fast convergence. Ideal for large enterprise and service provider cores needing scalable MPLS VPN, advanced routing, and rich OAM with centralized management under Comware. -
Vendor:HPE
HPE JG737A | MSR SIC 4x enhanced synchronous serial (sync/async) WAN module
Adds four high‑performance synchronous/asynchronous serial interfaces to modular MSR routers using the SIC slot. Ideal for legacy WAN connections, SCADA, industrial, or specialized serial backhaul, with flexible cabling options to common serial standards and support for PPP/HDLC encapsulations. -
Vendor:HPE
HPE JG426A | MSR HMIM 24x 10/100/1000Base-T switch module, Layer2, non-PoE
Expand MSR chassis with 24 additional Gigabit Ethernet RJ45 switch ports. This HMIM form-factor module delivers Layer 2 switching with VLAN, link aggregation, and spanning tree capabilities, ideal for branch aggregation and LAN extension inside modular MSR routers. It is a non-PoE switching module designed for MSR platforms that support HMIM slots. -
Vendor:HPE
HPE JG422A | 8x 1GbE RJ-45 HMIM module, 10/100/1000 autosensing, non-PoE, MSR4000 compatible
An HMIM expansion module that adds eight copper Gigabit Ethernet ports to modular services routers in the MSR4000 family. Ideal for high-density LAN aggregation or routed access, it supports auto-negotiation and auto MDI/MDIX for seamless deployment. The module integrates with the chassis operating system for VLANs, link aggregation, QoS, and monitoring consistent with platform capabilities. Designed for reliability with line-rate forwarding and simple installation. -
Vendor:HPE
HPE JG335A | HSR6800 1200W AC PSU | hot-swappable | 100–240V, 50/60Hz | redundant PSU-ready
1200W hot‑swappable AC power supply for HSR6800 series routers, enabling resilient power architectures with 1+1 or N+1 redundancy. Supports global input voltages and integrates with chassis power management for live insertion and simplified serviceability. -
Vendor:Cisco
Cisco WP-WIFI6-EWC-Z | Wi‑Fi 6 (802.11ax) dual‑band 2.4/5 GHz, EWC-capable pluggable router module
WP-WIFI6-EWC-Z
Vendor:CiscoCisco WP-WIFI6-EWC-Z | Wi‑Fi 6 (802.11ax) dual‑band 2.4/5 GHz, EWC-capable pluggable router module
Add high-efficiency Wi‑Fi 6 to compatible IoT routers with a compact pluggable module that supports dual‑band operation and Embedded Wireless Controller (EWC) functionality for small to medium deployments without an external controller. Ideal for industrial/edge use cases requiring local WLAN access or wireless backhaul, with enterprise security and centralized management through the router/EWC. -
Vendor:Cisco
Cisco VWIC3-4MFT-T1-E1 | 4x T1/E1 MFT RJ-48C, Nx64k channelized, ISDN PRI/PPP/FR; T1 ESF/B8ZS | E1 CRC4/HDB3; EHWIC for ISR G2
Add four flexible T1/E1 trunks to ISR G2 routers with a third‑gen Multiflex Trunk card. Use for data (PPP/Frame Relay/HDLC) or voice (ISDN PRI/CAS) with channelized Nx64 kbps services and robust clocking options. Designed for reliable branch WAN and voice trunk aggregation in a single slot. -
Vendor:Cisco
Cisco VWIC3-2MFT-T1-E1 | 2xT1/E1 Multiflex Trunk (MFT) Voice/WAN Interface Card | Channelized | Data/Voice
VWIC3-2MFT-T1-E1
Vendor:CiscoCisco VWIC3-2MFT-T1-E1 | 2xT1/E1 Multiflex Trunk (MFT) Voice/WAN Interface Card | Channelized | Data/Voice
Dual-port T1/E1 Multiflex Trunk interface card adding flexible voice and data WAN connectivity to compatible ISR platforms. Supports channelized operation for PRI/CAS, data framing, and clocking options, enabling branch voice trunks or routed WAN services. Ideal for PSTN interconnect, PBX integration, or legacy TDM WAN migration scenarios. -
Vendor:Cisco
Cisco VWIC3-2MFT-G703 | 2x E1 G.703 MFT, 2.048 Mbps unframed/framed (G.704), Nx64k, RJ-45 120Ω; PRI/PPP/FR; EHWIC for ISR G2
Dual-port G.703 E1 Multiflex Trunk card providing two independent E1 circuits for ISR G2 routers. Leverage unframed (G.703) or framed (G.704) operation for data and voice, enabling resilient leased-line backhaul and ISDN PRI with channelized Nx64 kbps granularity. -
Vendor:Cisco
Cisco VWIC3-1MFT-T1-E1 | 1-port T1/E1 multiflex VWIC, RJ-48C, integrated CSU/DSU, channelized 24/31 DS0, PRI-capable
VWIC3-1MFT-T1-E1
Vendor:CiscoCisco VWIC3-1MFT-T1-E1 | 1-port T1/E1 multiflex VWIC, RJ-48C, integrated CSU/DSU, channelized 24/31 DS0, PRI-capable
Single-port T1/E1 multiflex interface for WAN access and digital voice, offering integrated CSU/DSU, channelized operation, and flexible clocking. Supports configuration as T1 or E1 via software for data or PRI applications on compatible routers with EHWIC/VWIC3 slots.
Why Choose XS Network Tech?
We are a trusted partner for businesses of all sizes, including government departments, data centres, and service providers. Our expert team in sales, logistics, and customer service ensures that your needs are met with speed and precision, from pre-sales consultation to order fulfilment. With a commitment to fast delivery, sustainability, and a wide inventory, XS Network Tech is your go-to source for IT hardware. Trust us for quality, fast responses, and a hassle-free experience every time.