-
Vendor:Meraki
Cisco MA-MNT-MV-28 | Pole mount adapter | MV 3rd-gen cameras | indoor/outdoor | strap/band compatible | concealed cable pass-through
Pole mount adapter for MV 3rd Generation Cameras, enabling secure attachment of compatible cameras to round poles for flexible placement. Rugged construction supports indoor or outdoor deployments and provides clean, protected cable routing through the mount for a professional finish. -
Vendor:Meraki
Cisco MA-MNT-MV-21 | pole mount bracket | MV52 | outdoor | stainless straps | wide pole diameter support
MA-MNT-MV-21
Vendor:MerakiCisco MA-MNT-MV-21 | pole mount bracket | MV52 | outdoor | stainless straps | wide pole diameter support
Outdoor pole-mount accessory engineered for MV52 telephoto deployments. Delivers a stable, secure install on round poles with included stainless straps and hardware, ideal for roadway, campus, and perimeter applications. -
Vendor:Meraki
Cisco MA-MNT-MV-18 | mounting plates replacement kit, MV 3rd‑gen compatible, service spare for fast swaps
MA-MNT-MV-18
Vendor:MerakiCisco MA-MNT-MV-18 | mounting plates replacement kit, MV 3rd‑gen compatible, service spare for fast swaps
Replacement mounting plates kit for MV 3rd‑generation cameras, ideal for refreshing worn hardware or completing spare-parts kits to speed on-site swaps. Maintains the original mounting footprint for straightforward replacements. -
Vendor:Meraki
Cisco MA-MNT-MV-11 | conduit back box, for MV wall arm (pairs with wall mount arm), cable management and termination
Conduit-ready back box that pairs with the MV wall mount arm to provide cable management and a clean termination point for MV72 deployments. Ideal for professional conduit runs and tidy, serviceable installations. -
Vendor:Meraki
Cisco MA-MNT-MR-H1A | AP wall-plate mount | for MR30H/MR36H | replacement bracket | low-profile | includes screws
MA-MNT-MR-H1A
Vendor:MerakiCisco MA-MNT-MR-H1A | AP wall-plate mount | for MR30H/MR36H | replacement bracket | low-profile | includes screws
Replacement wall-plate mounting bracket for MR30H and MR36H access points. Perfect for moves, adds, and changes when original hardware is unavailable, maintaining a clean in-room appearance and secure fit. Designed for quick, reliable installation on standard wall plates. Includes mounting screws for rapid deployment. -
Vendor:Meraki
Cisco MA-MNT-MR-18 | AP Mount Kit | Compatible: MR46E | Ceiling/Wall | Indoor | External-antenna model support | Replacement hardware
Replacement mounting kit for MR46E indoor access points (external-antenna model). Provides the correct bracket and hardware for secure wall or ceiling grid installation with clearance for antenna leads. -
Vendor:Meraki
Cisco MA-MNT-MR-17 | AP Mount Kit | Compatible: MR36 | Ceiling/Wall | Indoor | Replacement hardware
MA-MNT-MR-17
Vendor:MerakiCisco MA-MNT-MR-17 | AP Mount Kit | Compatible: MR36 | Ceiling/Wall | Indoor | Replacement hardware
Replacement mounting kit for MR36 indoor access points. Restores factory mounting capability for clean ceiling T-bar or wall installations, including security fasteners and grid clips. -
Vendor:Meraki
Cisco MA-MNT-MR-16 | Outdoor AP Mount Kit | Compatible: MR76/MR86 | Wall/Pole | Weather resistant | Replacement hardware
Replacement outdoor mounting kit for MR76/MR86 access points. Provides the wall and pole hardware needed to securely mount or re-mount outdoor units, with rugged components for weather-exposed deployments. -
Vendor:Meraki
Cisco MA-MNT-MR-14 | AP mounting kit | MR55 compatible | ceiling/wall | replacement brackets + hardware
MA-MNT-MR-14
Vendor:MerakiCisco MA-MNT-MR-14 | AP mounting kit | MR55 compatible | ceiling/wall | replacement brackets + hardware
Replacement mounting kit for the MR55 access point. Restores the complete mounting interface and hardware needed for clean, secure ceiling or wall installations with fast AP swap capability. -
Vendor:Meraki
Cisco MA-MNT-MID-1 | Mid-mount rack kit | center-mount brackets | 19-inch rack install | compatibility: MS225/MS250 switches | hardware included
Mid-mount rack bracket kit for centering compatible switches in equipment racks. Ideal for balanced installs and clean cable management; includes brackets and mounting screws. -
Vendor:Meraki
Cisco MA-INJ-6 | 802.3bt PoE++ Injector | 60W | 10/100/1000/2.5/5G mGig pass-through | 1x PoE out
Multigig, high‑power PoE injector delivering up to 60W over 802.3bt (PoE++) for next‑gen APs, cameras, and IoT. Backward compatible with 802.3af/at devices and supports 10/100/1000/2.5/5GBASE‑T pass‑through. Power cord not included. -
Vendor:Meraki
Cisco MA-INJ-4 | Gigabit PoE+ Injector | 802.3at (30W) | 10/100/1000 | 100–240V AC | No Power Cord
IEEE 802.3at PoE+ injector for powering access points, IP phones, and cameras while maintaining full gigabit throughput. Ideal when a non-PoE switch is in place. This version ships without a power cord. -
Vendor:Meraki
Cisco MA-FAN-16K2 | Back-to-front airflow fan module | 16K RPM | hot-swappable | for MS390 switch
MA-FAN-16K2
Vendor:MerakiCisco MA-FAN-16K2 | Back-to-front airflow fan module | 16K RPM | hot-swappable | for MS390 switch
High-performance fan module delivering back-to-front airflow to match specific rack cooling layouts. Hot-swappable and field-replaceable to keep switches online while maintaining the required airflow direction. -
Vendor:Meraki
Cisco MA-CBL-TEMP-ME-1 | Bare-metal temperature probe | fast-response tip | MT sensor compatible
MA-CBL-TEMP-ME-1
Vendor:MerakiCisco MA-CBL-TEMP-ME-1 | Bare-metal temperature probe | fast-response tip | MT sensor compatible
Bare-metal temperature probe offering rapid response to temperature changes for process and ambient monitoring. Ideal when immediate detection of fluctuations is required and glycol buffering is not desired. -
Vendor:Meraki
Cisco MA-CBL-TEMP-GL-1 | Glycol-encased temperature probe | buffered readings for cold storage | MT sensor compatible
MA-CBL-TEMP-GL-1
Vendor:MerakiCisco MA-CBL-TEMP-GL-1 | Glycol-encased temperature probe | buffered readings for cold storage | MT sensor compatible
Glycol-encased temperature probe designed to provide buffered, stable readings in refrigerators and freezers, minimizing short-term fluctuations from door openings or defrost cycles. Optimized for food safety and cold-chain monitoring with easy, plug-in installation to supported MT sensors. -
Vendor:Meraki
Cisco MA-CBL-SPWR-30CM | Power-Stack Cable | 30 cm | for MS390 power sharing | short jumper for adjacent units
MA-CBL-SPWR-30CM
Vendor:MerakiCisco MA-CBL-SPWR-30CM | Power-Stack Cable | 30 cm | for MS390 power sharing | short jumper for adjacent units
Create compact, clean power-stack links between adjacent MS390 switches with a 30 cm power-stacking cable. Ideal for side-by-side units in the same rack U-space, it enables power pooling and redundancy without excess slack. This is a DC power interconnect, not a data stacking or uplink cable.
Why Choose XS Network Tech?
We are a trusted partner for businesses of all sizes, including government departments, data centres, and service providers. Our expert team in sales, logistics, and customer service ensures that your needs are met with speed and precision, from pre-sales consultation to order fulfilment. With a commitment to fast delivery, sustainability, and a wide inventory, XS Network Tech is your go-to source for IT hardware. Trust us for quality, fast responses, and a hassle-free experience every time.