-
Vendor:HPE
HPE JD637A | RPS interconnect cable, 1m length, for X290/MSR30
Purpose-built redundant power interconnect for linking MSR30 routers to X290 RPS units. The 1-meter length is ideal for neat rack-level routing and secure power failover connections. -
Vendor:HPE
HPE JD573B | SIC module, 4x 10/100 Fast Ethernet (RJ45) ports for MSR
Add four Fast Ethernet interfaces to compatible MSR series routers with this compact SIC module. Ideal for branch and edge deployments requiring additional copper ports for LAN/WAN segmentation, VLANs, and policy-based routing managed by the host router OS. -
Vendor:HPE
HPE JD571A | 1-port ISDN BRI S/T SIC | 2B+D 144 kb/s | RJ-45 | ITU-T I.430 | Dial/backup for MSR
Single-port ISDN BRI S/T Smart Interface Card for MSR routers, providing a 2B+D (2×64 kb/s + 16 kb/s D) interface over an 8P8C (RJ-45) S/T presentation. Ideal for primary BRI links, dial-on-demand, or backup connectivity. Requires an external NT1 for S/T environments. -
Vendor:HPE
HPE JD557A | 1-port Enhanced Sync Serial SIC | V.35/X.21/EIA-530 via cables | up to 8 Mb/s | DTE/DCE clocking | PPP/HDLC/Frame Relay
Single-port enhanced synchronous serial Smart Interface Card (SIC) for MSR routers, supporting multiple physical interfaces using the appropriate breakout cables. Ideal for legacy and low-speed WAN links running PPP, HDLC, or Frame Relay, with flexible DTE/DCE clocking options up to 8 Mb/s. -
Vendor:HPE
HPE JD531A | T3/E3 router cable | 75Ω dual BNC ↔ Smart-Serial | DS3 44.736 Mb/s / E3 34.368 Mb/s | B3ZS/HDB3 | for MSR T3/E3 SIC
High-frequency coax cable assembly that adapts an MSR T3/E3 SIC port to standard 75Ω dual-BNC Tx/Rx connections for DS3/E3 handoff to a CSU/DSU or service provider demarc. Supports T3 (B3ZS) and E3 (HDB3) framing/line coding per common standards. -
Vendor:HPE
HPE JD525A | V.35 DCE serial cable | 3 m | Smart-Serial to V.35 (M34) | up to 2 Mb/s sync | for MSR Enhanced Serial SIC
Purpose-built V.35 DCE cable for connecting MSR Enhanced Serial SIC ports to V.35 equipment or back-to-back lab links where the router provides clocking. 3 m length with router-side high-density Smart-Serial and network-side V.35 (M34) DCE head. Ideal for PPP/HDLC/Frame Relay on low-speed WAN links. -
Vendor:HPE
HPE JD523A | V.35 serial cable, DTE role, 3m, router high-density 60-pin↔M34 (Winchester), ITU‑T V.35, up to ~2 Mb/s
3m V.35 DTE serial cable for connecting router high-density serial interfaces to V.35 DCE equipment such as CSU/DSUs. Suited for legacy synchronous WAN links requiring robust, low-noise differential signaling. -
Vendor:HPE
HPE JD521A | V.24/RS-232 serial cable, DCE role, 3m, router high-density 60-pin↔DB-25, sync/async, up to ~115.2 kb/s
3m V.24 (RS-232) DCE serial cable for presenting a DCE interface from a router’s high-density serial port to a DTE endpoint. Ideal for lab setups, back-to-back testing, or connecting to equipment expecting a DCE side. -
Vendor:HPE
HPE JD519A | V.24/RS-232 serial cable, DTE role, 3m, router high-density 60-pin↔DB-25, sync/async, up to ~115.2 kb/s
3m V.24 (RS-232) DTE serial cable for connecting router high-density serial interfaces to DCE equipment such as CSU/DSUs or modems. Supports synchronous and asynchronous operation for legacy WAN and console/serial applications. -
Vendor:HPE
HPE JD511A | E1 impedance conversion cable, RJ45↔dual BNC, 120Ω↔75Ω, ITU-T G.703/G.704, 2.048 Mb/s, inline balun
E1 conversion cable for balancing 120Ω RJ45 E1 ports to 75Ω dual‑BNC coax plant. Provides bidirectional impedance matching for G.703/G.704 E1 services, enabling reliable carrier handoff between balanced and unbalanced media. -
Vendor:HPE
HPE JD367A | 2x 1Gb SFP uplink module | Hot-swap | For 5500/4800 switches
Expansion module providing two 1Gb SFP uplink ports to increase fiber or copper SFP connectivity on compatible 5500/4800 series switches. Enables flexible media choice and link aggregation for higher availability. -
Vendor:HPE
HPE JD366B | DC–DC PSU | 150W | -48–60 VDC in → 12 VDC out | External converter
Telecom-grade DC–DC power supply delivering a stable 12 VDC rail from a -48 to -60 VDC input. Ideal for powering compatible networking equipment from DC plants in carrier, industrial, or remote deployments. -
Vendor:HPE
HPE JD363B | CX4 DAC | 10Gb passive | 0.5 m | CX4-to-CX4 local interconnect
Short-run, low-latency CX4 direct-attach copper for local device interconnect or stacking within the rack. Ideal for 10GbE/InfiniBand CX4 links where minimal cabling delay and simplicity are required. -
Vendor:HPE
HPE JD362B#ABG | 150W AC-to-12V DC power supply | 100–240V input | external PSU for select switches
Regional variant of the X361 150W AC‑to‑12V DC power supply for supported networking devices; electrical specifications remain 150W, 12V DC regulated with auto‑ranging 100–240V AC input. Refer to your device’s compatibility list for this specific variant. -
Vendor:HPE
HPE JD362B | 150W AC-to-12V DC power supply | 100–240V input | external PSU for select switches
Universal auto‑ranging AC‑to‑DC adapter delivering a regulated 12V DC, 150W output for supported networking devices that specify the X361 150W supply. Use as a primary or replacement power source per device guidelines. -
Vendor:HPE
HPE JD361B | 1x 10GbE XFP uplink | expansion module for 5500 Series | 10GBASE-SR/LR/ER/LRM support
Enable a single high‑bandwidth 10GbE uplink on 5500 Series switches with this compact XFP expansion module, ideal for linking to core/aggregation or high‑speed servers. Choose from a broad range of standards‑based XFP optics to match distance and media.
Why Choose XS Network Tech?
We are a trusted partner for businesses of all sizes, including government departments, data centres, and service providers. Our expert team in sales, logistics, and customer service ensures that your needs are met with speed and precision, from pre-sales consultation to order fulfilment. With a commitment to fast delivery, sustainability, and a wide inventory, XS Network Tech is your go-to source for IT hardware. Trust us for quality, fast responses, and a hassle-free experience every time.