Skip to product information
1 of 1

NVIDIA

NVIDIA MCX75310AAS-HEAT | ConnectX-7 200GbE/NDR200 OSFP Adapter, Crypto Disabled

SKU:MCX75310AAS-HEAT

Request Quote
Sale Sold out
Shipping calculated at checkout.

Stock Status: Enquire

20-min response

Need a quote or bulk pricing? Answered within 20 minutes, Sydney business hours.

Description

The ConnectX-7 MCX75310AAS-HEAT is a single-port OSFP network adapter in a half-height, half-length PCIe card. It is positioned for AI, HPC, cloud, hyperscale and enterprise data centres, and works as an InfiniBand HCA on Quantum-2 InfiniBand fabrics or as a 200GbE SmartNIC.

The port runs InfiniBand NDR200 at 200Gb/s by default, or 200GbE in Ethernet mode, with support for lower InfiniBand speeds down to SDR and Ethernet speeds of 100, 50, 40, 10 and 1 Gb/s. The host interface is PCIe x16 Gen 4.0/5.0, with Gen 3.0 compatibility. This part number has Secure Boot enabled and the crypto engine disabled, and it is fitted with a tall bracket. The crypto setting is the difference from sibling ConnectX-7 part numbers, because inline IPsec, TLS and MACsec encryption offloads are not available on this SKU.

For connectivity, the OSFP cage takes OSFP optics or cables. The card supports Linux, Windows and VMware, and offers remote boot over Ethernet, iSCSI, PXE and UEFI on x86 and Arm hosts.

Enquire with XS Network Tech for new or used pricing and availability.

Features

- NVIDIA ASAP2 accelerated switching and packet processing for SDN and VNF offload at line rate
- RoCE and Zero Touch RoCE for low-latency RDMA over Ethernet
- NVIDIA GPUDirect and GPUDirect Storage support
- NVMe-oF target offloads, including NVMe-oF over RoCE and TCP acceleration
- SR-IOV, VirtIO acceleration and VXLAN, GENEVE and NVGRE overlay offload
- Advanced PTP (IEEE 1588v2) and SyncE precision timing
- InfiniBand in-network computing and collective operations offload
- Secure boot with hardware root-of-trust, secure firmware update and on-board flash encryption

Warranty

All products sold by XS Network Tech include a 12-month warranty on both new and used items. Our in-house technical team thoroughly tests used hardware prior to sale to ensure enterprise-grade reliability.

All technical data should be verified on the manufacturer data sheets.

View full details

specs-tabs

Collapsible content

Technical Specifications

FAQs

Technical Specifications

- Part number: MCX75310AAS-HEAT
- Ports: 1 x OSFP (single-port)
- InfiniBand data rate: NDR200 200Gb/s (default mode)
- Ethernet data rate: 200GbE
- InfiniBand speeds supported: NDR200/HDR/HDR100/EDR/FDR/SDR
- Ethernet speeds supported: 200/100/50/40/10/1 Gb/s
- Host interface: PCIe x16 Gen 4.0/5.0 (SERDES 16GT/s / 32GT/s), Gen 3.0 compatible
- Form factor: PCIe Half Height, Half Length (HHHL)
- Dimensions: 2.71 in. x 6.6 in. (68.90 mm x 167.65 mm)
- Bracket type: Tall bracket
- Secure Boot: Enabled
- Crypto: Disabled
- InfiniBand protocol: IBTA v1.5, auto-negotiation NDR200 (2 lanes x 100Gb/s per lane)
- Ethernet electrical interfaces: 200GAUI-2 C2M, 200GAUI-4 C2M, 200GBASE-CR4, 1000BASE-CX, CAUI-4 C2M, 25GAUI C2M, XLAUI C2M, XLPPI, SFI
- Host management: NC-SI, MCTP over SMBus, MCTP over PCIe, PLDM for monitor/control and firmware update
- Remote boot: Ethernet, iSCSI, PXE, UEFI (x86 and Arm)
- Supported operating systems: Linux, Windows, VMware

FAQs

Q: Does this adapter need a licence or subscription?
A: No licence or subscription is required for the adapter itself. This SKU has the crypto engine disabled, so the inline IPsec, TLS and MACsec encryption offloads are not available on it.

Q: What is the difference between this part number and other ConnectX-7 single-port OSFP cards?
A: This card has Secure Boot enabled and crypto disabled, and it ships with a tall bracket. Other ConnectX-7 part numbers can differ in crypto capability, port count, form factor and bracket type.

Q: Which host slot does it need?
A: It uses a PCIe x16 slot and runs at Gen 4.0 or Gen 5.0 speeds, with Gen 3.0 compatibility. The card is powered from the PCIe slot.

Q: What optics or cables does the OSFP port use?
A: The port is an OSFP cage, so it needs OSFP optics or OSFP cables to connect to a switch or another adapter.

Q: Can it run as both InfiniBand and Ethernet?
A: Yes. The port defaults to InfiniBand NDR200 at 200Gb/s and can also operate as 200GbE Ethernet.

Recently Viewed

  • Request a Quote

    Looking for competitive pricing? Submit a request, and our team will provide a tailored quote that fits your needs.

  • Contact Us Directly

    Have a question or need immediate assistance? Call us for expert advice and real-time support.

    Call us Now  
  • Contact Us Directly

    Have a question or need immediate assistance? Call us for expert advice and real-time support.

    Contact us