-
Vendor:Meraki
Meraki CW-ANT-GPS2-S-00 | GNSS/GPS antenna | SMA | 2 dBi omni | outdoor-rated
CW-ANT-GPS2-S-00
Vendor:MerakiMeraki CW-ANT-GPS2-S-00 | GNSS/GPS antenna | SMA | 2 dBi omni | outdoor-rated
Outdoor GNSS/GPS antenna with SMA interface and a 2 dBi omnidirectional pattern for satellite timing/location on Catalyst and Meraki gateways and access points that support an external GNSS input. Designed for robust outdoor placements where clear sky view is required. -
Vendor:Meraki
Meraki CW-ANT-GPS1-M-00 | GNSS antenna | MMCX | 10 m cable | GPS L1 | omni reception
CW-ANT-GPS1-M-00
Vendor:MerakiMeraki CW-ANT-GPS1-M-00 | GNSS antenna | MMCX | 10 m cable | GPS L1 | omni reception
Compact GNSS antenna with MMCX interface and a 10 m integrated cable for reliable GPS L1 timing and location on Catalyst and Meraki platforms. Omnidirectional skyward reception supports flexible remote placement for optimal satellite visibility. -
Vendor:Meraki
Meraki CW-ANT-D1-NS-00 | Directional patch antenna: tri‑band 2.4/5/6 GHz, 8/9/9 dBi, N‑Type, focused coverage
CW-ANT-D1-NS-00
Vendor:MerakiMeraki CW-ANT-D1-NS-00 | Directional patch antenna: tri‑band 2.4/5/6 GHz, 8/9/9 dBi, N‑Type, focused coverage
Tri‑band directional patch antenna delivering focused coverage and improved SNR for enterprise Wi‑Fi. Ideal for corridors, warehouses, and targeted cells; supports 2.4, 5, and 6 GHz bands with 8/9/9 dBi nominal gain. N‑Type connector interface for integration with external‑antenna APs in Catalyst and Meraki ecosystems. -
Vendor:Cisco
Cisco CW-ACC-SPACER1-00 | Wall‑plate AP spacer kit: added standoff/clearance for cabling and conduit
CW-ACC-SPACER1-00
Vendor:CiscoCisco CW-ACC-SPACER1-00 | Wall‑plate AP spacer kit: added standoff/clearance for cabling and conduit
Spacer kit that adds standoff behind wall‑plate access points to accommodate cable bend radius, surface irregularities, or conduit within the box. Helps achieve flush, professional mounting on varied wall surfaces. -
Vendor:Cisco
Cisco CW-ACC-N2RPTNC | Antenna adapter 4‑pack: N‑Type ↔ RP‑TNC, 50Ω, Wi‑Fi 2.4/5 GHz, low‑loss fit
CW-ACC-N2RPTNC
Vendor:CiscoCisco CW-ACC-N2RPTNC | Antenna adapter 4‑pack: N‑Type ↔ RP‑TNC, 50Ω, Wi‑Fi 2.4/5 GHz, low‑loss fit
Four-piece RF adapter set bridging N‑Type and RP‑TNC interfaces to mate enterprise Wi‑Fi access points, extension leads, and external antennas. Ideal for Catalyst/Meraki deployments using RP‑TNC AP ports with N‑Type patch or sector antennas. 50‑ohm impedance and robust metal bodies ensure reliable RF performance across 2.4 and 5 GHz bands. -
Vendor:Meraki
Meraki CW-ACC-KIT1-00 | Accessory kit for 9163E and Meraki outdoor APs | mounting hardware set | gaskets & fasteners
CW-ACC-KIT1-00
Vendor:MerakiMeraki CW-ACC-KIT1-00 | Accessory kit for 9163E and Meraki outdoor APs | mounting hardware set | gaskets & fasteners
Comprehensive accessory pack for outdoor AP installations, providing common hardware and seals to mount and weatherproof supported models including CW9163E and select Meraki units. Ideal as a first-install kit or spares on truck rolls. -
Vendor:Cisco
Cisco CW-ACC-GPS1 | USB GNSS receiver for controller/AP sync | GPS/GNSS timing & location | plug-and-play USB
Provide precise GNSS timing and location to compatible access points or controllers via USB. Ideal for location services, time synchronization, and site surveys where an external GNSS feed enhances accuracy. -
Vendor:Cisco
Cisco CW-ACC-DESK1-00 | Desktop stand for wall-plate access points | tool-free drop-in | anti-slip base | cable passthrough
Convert a wall-plate access point into a stable desktop unit for labs, demos, or temporary deployments. The cradle secures the AP, protects surfaces, and routes cables neatly for quick, professional setups. -
Vendor:Cisco
Cisco CW-ACC-9179-CVR | Solar shield kit for 9179F outdoor AP | reduces solar heat load | UV-resistant metal | fits standard outdoor mounts
Purpose-built sun deflector for the 9179F outdoor access point to reduce radiant heat gain and help keep radios within thermal limits in high-solar environments. Installs to existing outdoor brackets with included hardware; ideal for rooftops, poles, and wall sites. -
Vendor:Cisco
Cisco CW-ACC-9179-B-00 | environment pack | outdoor | for CW9179F | weather seals, dust caps, cable glands | deployment accessory kit
Accessory kit for outdoor deployments of CW9179F, providing weather-focused sealing components, dust caps for unused ports, and cable strain-relief/gland parts to help maintain enclosure integrity in exposed environments. Supports clean terminations and added protection against moisture and debris. -
Vendor:Cisco
Cisco CW-ACC-9179-A-00 | environment pack | indoor | for CW9179F | seals, dust covers, strain relief | deployment accessory kit
Accessory kit tailored for indoor deployments of CW9179F, providing port dust caps, sealing components, and cable strain-relief parts to help maintain enclosure integrity and tidy cabling in conditioned environments. Simplifies installation and protects unused ports from contaminants. -
Vendor:Cisco
Cisco CS-PWR-INJ-30W | 802.3at PoE+ injector | 30W | 1x RJ45 data-in + 1x RJ45 PoE-out | Gigabit pass-through | AC mains input
Single-port midspan that delivers up to 30W of IEEE 802.3at PoE+ power with Gigabit data pass-through—ideal for access points, IP phones, and cameras when a PoE switch isn’t available. Compact, reliable design with overload and short-circuit protection. -
Vendor:Cisco
Cisco CK-4941-EXT-3PACK | 3‑pack 2.4GHz 9dBi omni dipoles, RP-TNC (male), indoor
CK-4941-EXT-3PACK
Vendor:CiscoCisco CK-4941-EXT-3PACK | 3‑pack 2.4GHz 9dBi omni dipoles, RP-TNC (male), indoor
Value 3‑pack of high‑gain 2.4GHz dipole antennas to extend indoor WLAN coverage for multiple APs. RP‑TNC (male) connectors attach directly to APs with RP‑TNC female ports. Ideal for 802.11b/g/n upgrades and replacements. -
Vendor:Cisco
Cisco CGR-N-CONN-WPAN | N-type connector kit, WPAN external antenna, for CGR1240, outdoor-ready
CGR-N-CONN-WPAN
Vendor:CiscoCisco CGR-N-CONN-WPAN | N-type connector kit, WPAN external antenna, for CGR1240, outdoor-ready
N-type RF connector kit designed to terminate WPAN external antenna interfaces on Cisco CGR1240 deployments. Enables reliable, low-loss antenna attachment in rugged environments and supports secure, vibration-resistant installations. -
Vendor:Cisco
Cisco CGR-LA-NM-NF | Lightning arrestor | N-male to N-female | inline coax surge protection | outdoor-rated
CGR-LA-NM-NF
Vendor:CiscoCisco CGR-LA-NM-NF | Lightning arrestor | N-male to N-female | inline coax surge protection | outdoor-rated
Inline RF lightning arrestor with N-male to N-female connectors for protecting antenna cabling and connected equipment on CGR1240 and IW3702 deployments. Install near the cable entry and bond to earth ground for best protection. -
Vendor:Cisco
Cisco CGR-LA-NF-NF | Lightning arrestor | N-female to N-female | inline coax surge protection | outdoor-rated
Inline RF lightning arrestor with N-female to N-female connectors for protecting antenna cabling and connected equipment on CGR1120 and IW3702 deployments. Install near the cable entry and bond to earth ground for best protection.
Why Choose XS Network Tech?
We are a trusted partner for businesses of all sizes, including government departments, data centres, and service providers. Our expert team in sales, logistics, and customer service ensures that your needs are met with speed and precision, from pre-sales consultation to order fulfilment. With a commitment to fast delivery, sustainability, and a wide inventory, XS Network Tech is your go-to source for IT hardware. Trust us for quality, fast responses, and a hassle-free experience every time.