• Juniper Compatible EX-SFP-10GE-SR-BCC 10GB SR Transceiver Module
1 1

Blue Cable Co

EX-SFP-10GE-SR-BCC | Juniper Compatible 10GB Multi-Mode 300m (10GBASE-SR)

EX-SFP-10GE-SR-BCC

35 in stock

$62.81 inc. GST
$57.10 ex. GST
Sale Sold out
Shipping calculated at checkout.
20-min response

Need a quote or bulk pricing? Answered within 20 minutes, Sydney business hours.

Description

The EX-SFP-10GE-SR-BCC is a drop-in compatible replacement for the Juniper EX-SFP-10GE-SR. It provides plug-and-play compatibility with Juniper Networks platforms that support SFP+ 10 Gigabit Ethernet optics. - Compliant with IEEE 802.3ae 10GBASE-SR, SFF-8431, and SFF-8432 standards, ensuring interoperability with standards-based switches and routers - SFP+ form factor, 10.3125 Gbps data rate, 850nm VCSEL transmitter, duplex LC connector - Supports link lengths up to 300m on OM3 multi-mode fibre and 400m on OM4 multi-mode fibre - Digital Diagnostics Monitoring (DDM) support via SFF-8472 enables real-time access to temperature, voltage, TX bias current, TX power, and RX power - Hot-swappable SFP+ module for installation and removal without powering down the host system - Low power consumption and high port density for cost-effective data centre and enterprise deployments

Features

• IEEE 802.3ae 10GBASE-SR compliance guarantees interoperability with vendor-neutral switch and router platforms that conform to the standard, eliminating vendor lock-in for short-reach 10 Gigabit Ethernet links
• 850nm VCSEL laser technology delivers reliable short-reach transmission with lower power consumption and relaxed fibre alignment tolerances compared to longer-wavelength single-mode optics
• Reach scales with fibre grade: 300m over OM3 (2000 MHz·km modal bandwidth at 850nm), extending to 400m over OM4 (4700 MHz·km), providing deployment flexibility across installed multi-mode infrastructure
• Digital Diagnostics Monitoring exposes five key operational parameters (temperature, supply voltage, TX bias current, TX output power, RX received power) via I2C interface for proactive link health monitoring and troubleshooting
• Hot-swappable SFP+ form factor enables field installation and replacement without system power-down, supporting maintenance windows and network expansion without disrupting adjacent ports or host uptime
• Low power VCSEL transmitter and efficient receiver design reduce per-port thermal load, enabling high-density 10GbE switching fabrics in space-constrained racks without additional cooling infrastructure

Warranty

5-Year Advanced Warranty on All Blue Cable Co® Products

Blue Cable Co® offers a comprehensive 5-Year Advanced Warranty on all our branded products. Our advanced warranty ensures fast, hassle-free replacements to keep your network running smoothly. If a fault occurs, we’ll deliver a replacement part before you return the faulty item—minimising downtime and giving you complete peace of mind.

Choose Blue Cable Co® for reliable, high-quality network components backed by industry-leading warranty support.

All technical data should be verified on the manufacturer data sheets.

View full details

specs-tabs

Technical Specifications

Also Known As

FAQs

Compatible SFP Selector

Technical Specifications

Brand: Blue Cable Co
BCC SKU: EX-SFP-10GE-SR-BCC
Compatible Replacement For: EX-SFP-10GE-SR
Compatibility: Juniper compatible
Lab Testing: Tested in Sydney, Australia
Warranty: 5-year advanced hardware replacement (Blue Cable Co)
Form Factor: SFP+
Data Rate: 10.3125 Gbps
Wavelength: 850nm
Fibre Type: Multi-Mode (MMF)
Connector Type: Duplex LC
DOM Support: Yes (per SFF-8472)
Standards: IEEE 802.3ae (10GBASE-SR), SFF-8431, SFF-8432
Max Reach: Up to 300m on OM3, up to 400m on OM4 (per datasheet, subject to fibre and link conditions)
Operating Temperature: 0°C to 70°C (commercial)

Also Known As

740-021308, QFX-SFP-10GE-SR, SFPP-10G-SR-C, SRX-SFP-10GE-SR

FAQs

Q: Will this work in place of the Juniper EX-SFP-10GE-SR?
A: Yes. The EX-SFP-10GE-SR-BCC is a plug-and-play replacement for the Juniper EX-SFP-10GE-SR. It shares the same SFP+ form factor, 10.3125 Gbps data rate, and IEEE 802.3ae 10GBASE-SR compliance, ensuring compatibility with Juniper platforms that specify the EX-SFP-10GE-SR part number.

Q: Which Juniper platforms support this transceiver?
A: This transceiver is compatible with Juniper switches and routers that feature SFP+ slots and support 10GBASE-SR optics. The module conforms to SFP+ MSA specifications and IEEE 802.3ae, enabling deployment in any Juniper platform with standard SFP+ 10 Gigabit Ethernet ports. Consult your platform documentation to confirm SFP+ 10GbE support.

Q: What fibre types are required for the specified reach distances?
A: For 300m reach, you need OM3 multi-mode fibre with 2000 MHz·km modal bandwidth at 850nm. For 400m reach, you need OM4 multi-mode fibre with 4700 MHz·km modal bandwidth. Older OM1 and OM2 fibres are supported but limited to approximately 33m and 82m respectively due to lower modal bandwidth, and are not recommended for new 10GbE installations.

Q: How do I access the Digital Diagnostics Monitoring parameters?
A: DDM parameters are accessible via the two-wire serial interface defined in SFF-8472. Most managed switches and routers expose these values through CLI commands or SNMP MIBs. The five monitored parameters are transceiver temperature, supply voltage, TX bias current, TX optical output power, and RX optical received power, enabling real-time link health assessment.

Q: Can this transceiver operate at 1 Gigabit Ethernet speeds?
A: Many 10GBASE-SR SFP+ modules support multi-rate operation from 1.25 Gbps to 10.3125 Gbps per SFF-8431, allowing them to function as 1000BASE-SX transceivers on dual-rate SFP+ ports. Host platform support for dual-rate or rate-select operation is required. Verify your switch or router supports 1G/10G rate negotiation on the specific port if backward compatibility with Gigabit Ethernet is needed.

Compatible SFP Selector

Need a Compatible SFP or QSFP Transceiver?

Use the Blue Cable Co Compatible SFP Selector to quickly filter by vendor compatibility, speed, form factor, fibre type, distance and connector and only see options that exist in our range.
Fully tested. No brand-tax. Sydney re-coding available if required.

Find Compatible Transceivers

100% compatible with equipment from major vendors

Coded and tested in our state of the art lab in Sydney

Cisco sfp-10g-sr transceiver module with metallic housing and a white label displaying serial number, model details, and regulatory markings.
Silver-colored sfp-10g-sr-bcc transceiver module with a white label featuring blue and black text, designed for 850nm wavelength optical communication.
Blue Cable Co
Cisco

Tested on real vendor hardware in Sydney

Every Blue Cable Co transceiver is coded for your platform and tested in our Sydney test rack on real vendor switches and firewalls before it ships. We check it is recognised and links up the same way the OEM optic does, so you don't find an "unsupported transceiver" error after it's installed.

Brands tested: Cisco, Meraki, Arista, Aruba, HPE, Juniper, Dell, Fortinet, Palo Alto, Check Point, Sophos, Moxa and NVIDIA. Speeds up to 100Gb.

  • 5 year replacement warranty
  • Sydney stock
  • Re-coding if you need it

Related Products

View all Fibre Optic Transceivers

Related Resources

1/2

  • Request a Quote

    Looking for competitive pricing? Submit a request, and our team will provide a tailored quote that fits your needs.

  • Contact Us Directly

    Have a question or need immediate assistance? Call us for expert advice and real-time support.

    Call us Now  

  • Contact Us Directly

    Have a question or need immediate assistance? Call us for expert advice and real-time support.

    Contact us