• Placeholder image
1 0

Cisco

Cisco ONS-MPO24-2MPO12 | 2× MPO‑12 to MPO‑24 SR4↔SR10 CPAK breakout harness, 20m

ONS-MPO24-2MPO12

POA
POA
POA
Sale Sold out
Taxes included. Shipping calculated at checkout.

Description

Purpose‑built MPO harness to interconnect two 12‑fiber MPO SR4 ports with a single 24‑fiber MPO SR10‑capable interface, enabling aggregation into a 100G SR10 path from dual 40G SR4 sources where supported. Includes two MPO‑12 legs and one MPO‑24 trunk for high‑density, parallel‑optics environments. Verify lane mapping, polarity, and compatibility with your SR4/SR10 and CPAK hardware before use.

Features

- Bridges dual SR4 MPO‑12 ports to a single SR10 MPO‑24 interface
- Supports high‑density 40G↔100G parallel‑optics aggregation
- Factory‑terminated MPO connectors for quick, reliable install
- Optimized for structured cabling in data center environments
- Mapping‑aware design when matched to SR4/SR10 requirements

Warranty

All products sold by XS Network Tech include a 12-month warranty on both new and used items. Our in-house technical team thoroughly tests used hardware prior to sale to ensure enterprise-grade reliability.

All technical data should be verified on the manufacturer data sheets.

View full details
  • You may also like
  • Best sellers
  • Related Products

specs-tabs

FAQs

Technical Specifications

FAQs

Q: Will this work with any 100G module that uses SR10 on MPO‑24?
A: It is designed for SR10‑capable interfaces that accept MPO‑24 and for sources using MPO‑12 SR4. Confirm the required lane mapping, polarity, and pinned/unpinned configuration in your module documentation.

Q: Is it compatible with OM3 or OM4?
A: Use the harness with the fiber type supported by your optics (e.g., OM3/OM4 for SR‑class MMF). Verify distances and fiber type per the transceiver specifications.

Q: Does the harness require specific polarity type?
A: Yes. SR4/SR10 solutions require defined polarity and pin mapping. Check your system’s required Type (A/B/C) and pinning before deployment.

Q: Can it be used with patch panels or only direct to optics?
A: It can be used direct‑attach or through MPO cassettes/panels as long as overall polarity and mapping remain correct.

Technical Specifications

- Cable type: MPO harness (2× 12‑fiber to 24‑fiber)
- Connectors: 2× MPO‑12 (SR4 legs) to 1× MPO‑24 (SR10 trunk)
- Intended application: Bridge dual 40G SR4 ports to a 100G SR10‑capable interface (e.g., compatible CPAK modules)
- Length: 20 meters
- Construction: Ribbon multifiber MPO
- Lane mapping/polarity: SR4↔SR10 mapping; verify with transceiver documentation
- Use case: High‑density parallel‑optics aggregation and structured cabling
- Handling: Maintain proper bend radius; inspect and clean MPO endfaces before mating

Recently Viewed

  • Request for a Quote

    Looking for competitive pricing? Submit a request, and our team will provide a tailored quote that fits your needs.

  • Contact Us Directly

    Have a question or need immediate assistance? Call us for expert advice and real-time support.

    Call us Now  

  • Contact Us Directly

    Have a question or need immediate assistance? Call us for expert advice and real-time support.

    Contact us