Cisco ONS-MPO16-2X8-2 | MPO‑16 to 2× MPO‑8 breakout fiber cable, 2m

SKU:ONS-MPO16-2X8-2

Stock Status: Enquire

Request Quote

Sale Sold out

Shipping calculated at checkout.

20-min response

Need a quote or bulk pricing? Answered within 20 minutes, Sydney business hours.

Description

Compact MPO breakout harness converting a 16‑fiber MPO trunk to two 8‑fiber MPO legs for short, tidy intra‑rack patching. Ideal where minimal slack and precise routing are required. Verify polarity and pinout before deployment.

Features

- Short 2m length minimizes slack in dense racks
- Breaks a 16‑fiber trunk into two 8‑fiber legs
- Fast deployment with factory‑terminated MPO connectors
- Supports parallel‑optics patching in high‑density environments
- Clean, reliable connections when used with proper polarity

Warranty

All products sold by XS Network Tech include a 12-month warranty on both new and used items. Our in-house technical team thoroughly tests used hardware prior to sale to ensure enterprise-grade reliability.

All technical data should be verified on the manufacturer data sheets.

View full details

specs-tabs

Technical Specifications

FAQs

Technical Specifications

- Cable type: MPO multifiber breakout (16F to 2× 8F)
- Connector A: MPO‑16
- Connector B: 2× MPO‑8
- Breakout ratio: 1‑to‑2
- Length: 2 meters
- Fiber construction: Ribbon, multifiber MPO interface
- Use case: Short intra‑rack jumpers and high‑density panels
- Polarity/pinning: Verify Type A/B/C and pinning as required by your system
- Handling: Maintain proper bend radius and clean before mating

FAQs

Q: Will this work with MPO‑based SR optics?
A: It is suitable for MPO‑terminated systems. Confirm your optics and cassettes accept MPO‑16 on the trunk side and MPO‑8 on the legs, and that the polarity and pin mapping match.

Q: Is the cable multimode or single‑mode?
A: Use the cable in accordance with the fiber type specified by your optics. Consult hardware documentation for fiber type and polarity requirements.

Q: Do I need pinned or unpinned connectors?
A: Requirements vary. Check your transceiver or panel documentation to match pinned/unpinned and key orientation.

Q: What is the recommended application for the 2m length?
A: Short runs within the same rack or between adjacent equipment where cable slack must be minimized.