-
Vendor:Cisco
Cisco VIP-SFP+-10GE-SR | 10G SFP+ | 10GBASE-SR | 850nm | 300m OM3 / 400m OM4 | LC duplex | DOM
VIP-SFP+-10GE-SR
Vendor:CiscoCisco VIP-SFP+-10GE-SR | 10G SFP+ | 10GBASE-SR | 850nm | 300m OM3 / 400m OM4 | LC duplex | DOM
Datacenter-ready 10GBASE-SR SFP+ for high-density multimode deployments. 850nm optics with LC duplex and DOM deliver dependable performance across 300 m (OM3) or 400 m (OM4) backbones. -
Vendor:Cisco
Cisco VIP-SFP+-10GE-LR | 10G SFP+ | 10GBASE-LR | 1310nm | 10km SMF | LC duplex | DOM
VIP-SFP+-10GE-LR
Vendor:CiscoCisco VIP-SFP+-10GE-LR | 10G SFP+ | 10GBASE-LR | 1310nm | 10km SMF | LC duplex | DOM
Carrier-grade 10GBASE-LR SFP+ for long-distance single-mode links up to 10 km. 1310nm optics with LC duplex and DOM deliver reliable, monitorable performance for datacenter and metro access. -
Vendor:Cisco
Cisco VIP-SFP-1GE-SX | 1G SFP | 1000BASE-SX | 850nm | 550m MMF | LC duplex | DOM
VIP-SFP-1GE-SX
Vendor:CiscoCisco VIP-SFP-1GE-SX | 1G SFP | 1000BASE-SX | 850nm | 550m MMF | LC duplex | DOM
High-performance 1000BASE-SX SFP for short-reach multimode links inside buildings and campus floors. 850nm VCSEL optics with LC duplex and DOM for live diagnostics. A cost-effective choice for aggregation and access layers. -
Vendor:Cisco
Cisco VIP-SFP-1GE-LX | 1G SFP | 1000BASE-LX | 1310nm | 10km SMF | LC duplex | DOM
VIP-SFP-1GE-LX
Vendor:CiscoCisco VIP-SFP-1GE-LX | 1G SFP | 1000BASE-LX | 1310nm | 10km SMF | LC duplex | DOM
Standards-compliant 1000BASE-LX SFP for long-reach single-mode links up to 10 km. Features LC duplex interface, 1310nm optics, and DOM for live diagnostics. Ideal for access uplinks and campus runs where reliability matters. -
Vendor:Cisco
Cisco VIP-SFP-1GE-BASET | 1G SFP transceiver, 1000BASE-T, RJ-45, 100 m Cat5e/6, 10/100/1000 auto-negotiation, SFP form factor
VIP-SFP-1GE-BASET
Vendor:CiscoCisco VIP-SFP-1GE-BASET | 1G SFP transceiver, 1000BASE-T, RJ-45, 100 m Cat5e/6, 10/100/1000 auto-negotiation, SFP form factor
Copper 1G SFP transceiver for 1000BASE-T over twisted-pair cabling. Supports 10/100/1000 auto-negotiation with RJ-45 interface up to 100 meters on Cat5e/6. Designed for switches, routers, and media interfaces with SFP slots that support 1000BASE-T SFPs. -
Vendor:Cisco
Cisco VIC3-4FXS-DID | 4x FXS/DID analog ports (RJ-11) | Caller ID, T.38 fax (IOS/DSP dep.) | Echo cancel | VIC3 form factor
Add four FXS/DID analog ports to a compatible voice gateway router to connect analog phones, fax machines, or PBX trunks with direct-inward-dial capability. RJ-11 interfaces provide battery feed and ring generation for FXS endpoints, with caller ID support and T.38 fax relay or G.711 pass-through (IOS/DSP dependent). Third‑generation VIC3 hardware offers improved timing and echo performance for reliable enterprise voice deployments. -
Vendor:Cisco
Cisco VIC3-2FXS-E-DID | 2‑port FXS/E with DID voice interface card | RJ‑11, caller ID, battery reversal, T.38/fax relay
VIC3-2FXS-E-DID
Vendor:CiscoCisco VIC3-2FXS-E-DID | 2‑port FXS/E with DID voice interface card | RJ‑11, caller ID, battery reversal, T.38/fax relay
Provide two enhanced FXS ports with DID capability for analog stations or trunks. This interface card supports caller ID, battery reversal for metering, and loop‑start signaling, with platform‑dependent SIP/MGCP/H.323 integration and T.38 fax relay. Ideal for connecting analog phones, faxes, modems, or PBX trunks to IP telephony systems. -
Vendor:Cisco
Cisco VIC3-2FXS-DID | 2x FXS/DID analog ports (RJ-11) | Caller ID, T.38 fax (IOS/DSP dep.) | Echo cancel | VIC3 form factor
Add two FXS/DID analog ports to a compatible voice gateway router for connecting analog phones, fax machines, or DID trunks. Provides RJ-11 interfaces with battery feed and ring generation, caller ID support, and T.38 fax relay or G.711 pass-through (IOS/DSP dependent). The VIC3 hardware generation enhances echo and clocking performance for dependable branch telephony. -
Vendor:Cisco
Cisco VIC3-2E-M | 2x E&M analog trunk ports (RJ-48), Type I–V selectable | ISR voice gateway module
Two-port E&M voice/fax interface card for connecting analog tie-lines to PBXs, radio systems, or legacy voice infrastructure on supported ISR platforms. Supports multiple E&M signaling types and 2- or 4-wire audio paths; media features depend on router IOS and DSP resources. -
Vendor:Cisco
Cisco VIC2-4FXO | 4-port FXO voice interface card (VIC2), RJ-11 analog trunks, loop/ground start, requires PVDM DSP, ISR router expansion
Second-generation 4-port FXO (VIC2) voice interface card providing analog PSTN trunk connectivity for voice-enabled ISR routers. Supports loop-start/ground-start signaling, caller ID, and tone detection when paired with router DSP resources. Ideal for PSTN access and analog failover. -
Vendor:Cisco
Cisco VG450/K9 | Modular analog VoIP gateway chassis | Up to 144 FXS | SIP, T.38 | Multi-slot | Gigabit Ethernet | Rackmount
Modular voice gateway chassis for building high-density analog solutions. Populate with high-density analog modules to deliver the exact FXS capacity needed—scaling up to 144 analog ports for large deployments. Ideal for migrating legacy analog devices to IP telephony with standards-based SIP and T.38 fax support. -
Vendor:Cisco
Cisco VG450-72FXS/K9 | 72 FXS analog VoIP gateway bundle | SIP, T.38 | 2x single-wide HD FXS modules | Gigabit Ethernet | Rackmount
Medium-density analog voice gateway bundle delivering 72 FXS ports on a modular chassis. Designed for organizations transitioning analog endpoints—phones, fax, modems, paging—to IP while maintaining reliability and simplified management. -
Vendor:Cisco
Cisco VG450-144FXS/K9 | 144 FXS analog VoIP gateway bundle | SIP, T.38 fax | Modular chassis | Gigabit Ethernet | Rackmount
High-density analog voice gateway bundle delivering 144 FXS ports on a modular chassis, ideal for migrating large numbers of legacy analog phones, fax, modems, and paging systems to IP telephony. Standards-based SIP and T.38 fax ensure broad interoperability with modern UC platforms. -
Vendor:Cisco
Cisco VG420-RM-23-2R | Rack mount kit | 23-inch 2-post (Telco) | Steel brackets + screws | For voice gateway chassis
VG420-RM-23-2R
Vendor:CiscoCisco VG420-RM-23-2R | Rack mount kit | 23-inch 2-post (Telco) | Steel brackets + screws | For voice gateway chassis
Rack-mount hardware kit for installing a compatible voice gateway chassis into 23-inch two-post (Telco) racks. Provides a secure, service-friendly front-mount installation and includes the required brackets and mounting screws. Ideal for telco environments standardizing on 23-inch frames. -
Vendor:Cisco
Cisco VG420-RM-19-2R | 19-inch rack mount kit | 2RU | ears + screws | for VG420 chassis
VG420-RM-19-2R
Vendor:CiscoCisco VG420-RM-19-2R | 19-inch rack mount kit | 2RU | ears + screws | for VG420 chassis
Mounting hardware kit for securing a 2RU VG420 chassis into standard 19-inch equipment racks, providing a clean, secure, and serviceable installation. -
Vendor:Cisco
Cisco VG420-NIM-BLANK | NIM slot blank cover | VG420 chassis filler | Airflow/EMI cover
VG420-NIM-BLANK
Vendor:CiscoCisco VG420-NIM-BLANK | NIM slot blank cover | VG420 chassis filler | Airflow/EMI cover
Blank filler panel for an empty Network Interface Module (NIM) slot on a VG420 chassis, helping maintain proper airflow, cooling efficiency, and EMI compliance when a slot is unpopulated.
-
Why buy Cisco from XS Network Tech?
We are the independent Cisco specialist Australian IT teams, data centres, and government departments rely on for speed and availability. Unlike other resellers, we hold our own stock in Australia. With us you bypass the 4 - 8 week lead times that slow most Cisco procurement down. From pre-sales to fulfilment, our team moves as fast as your project.
-
Can I still buy discontinued Cisco models?
Yes, we supply both current-generation Cisco switches, routers, and modules and end-of-life (EOL) models that other resellers no longer stock. We hold stock for discontinued Catalyst, Nexus, ISR, ASR, and UCS models. Whether you need a like-for-like spare, a cost-effective upgrade, or a legacy model to extend your existing deployment, we can source it.
-
How quickly can I get Cisco hardware in Australia?
Our Cisco range covers switches (Catalyst, Nexus, Industrial), routers (ISR, ASR), wireless (Meraki, Aironet), security appliances, transceivers, servers (UCS), and accessories from new, used, and EOL. All units are stocked in Sydney and available for same-day dispatch Australia-wide. When you need hardware fast, we can actually deliver it.