-
Vendor:Blue Cable Co
SFP56 to SFP56 DAC Cable, 50GB, 50GBASE-CR-BCC | Aruba Compatible 0.65 to 3 Meter
R0M46A-BCC
Vendor:Blue Cable CoSFP56 to SFP56 DAC Cable, 50GB, 50GBASE-CR-BCC | Aruba Compatible 0.65 to 3 Meter
The R0M46A-BCC is a drop-in compatible replacement for the Aruba R0M46A. This passive direct attach copper cable supports 50 Gbps data transmission between SFP56 ports and is fully plug-and-play with Aruba 6300, 6400, and 8360 series switches. - Compliant with IEEE 802.3cd and SFF-8432 standards, ensuring interoperability with SFP56-enabled devices - 50 Gbps passive twinax copper cable with SFP56 connectors on both ends - Commercial operating temperature range: 0 to 70 degrees Celsius - Low latency and minimal power consumption compared to active optical solutions - Available in 0.65 meter and 3 meter lengths for intra-rack and adjacent rack connections - Compatible with Aruba 6300F, 6300M, 6405, 6410 switch series and CX 8360 switch platforms -
Vendor:Blue Cable Co
SP-CABLE-ADASFP+-BCC | Fortinet Compatible SFP+ to SFP+ Active Optical Cable, 10GB, 10GBASE-AOC | 10M
SP-CABLE-ADASFP+-BCC
Vendor:Blue Cable CoSP-CABLE-ADASFP+-BCC | Fortinet Compatible SFP+ to SFP+ Active Optical Cable, 10GB, 10GBASE-AOC | 10M
The SP-CABLE-ADASFP+-BCC is a drop-in compatible replacement for the Fortinet SP-CABLE-ADASFP+. This active direct attach copper twinax cable provides plug-and-play compatibility with Fortinet switches, routers, and firewalls equipped with SFP+ ports. - Compliant with 10GBase-CR, SFF-8431, and SFF-8432 standards, ensuring interoperability with Fortinet networking platforms - SFP+ to SFP+ form factor supporting data rates from 1 Gbps to 10.5 Gbps over active twinax copper - 10m cable length ideal for intra-rack and rack-to-rack connectivity in data center environments - Active copper design with Clock and Data Recovery (CDR) technology enables longer reach than passive DAC cables - Digital diagnostic monitoring (DDM) support for real-time cable performance visibility - Hot-swappable design with low power consumption under 0.5W per cable assembly -
Vendor:Cisco
STACK-T1-50CM | Stacking Cable For C3850, C9300, C9300X | 50CM
Short-run Type 1 passive copper stacking cable for StackWise-480-enabled switches. The 0.5 m length minimizes slack for side-by-side switches, improving airflow and cable management while maintaining full stack performance. -
Vendor:Cisco
STACK-T2-50M | Stacking Cable for C3650 | 50CM
Compact 0.5 m Type 2 stacking cable tailored for tightly coupled switches in the same rack U region. Minimizes slack for ultra-clean cable dressing. -
Vendor:Cisco
STACK-T3-50CM | Stacking Cable For C9300L | 50CM
50 cm Type 3 StackWise stacking cable tailored for tight, clean runs between adjacent C9300L switches. Short length helps minimize slack and improve airflow. -
Vendor:Cisco
STACK-T4-50CM | Stacking Cable for C9200 & C9200L | 50CM
Type 4 StackWise passive copper stacking cable, 0.5m length, ideal for tightly co-located switches within the same rack. Provides robust, low-latency stack backplane connectivity with secure latching. Tailored for Catalyst 9200/9200L deployments where minimal slack is preferred. -
Vendor:Supermicro
Supermicro AS-1014S-WTRT | 1U Rackmount Server, AMD EPYC 7002/7003, 8 DIMM 2TB
AS-1014S-WTRT
Vendor:SupermicroSupermicro AS-1014S-WTRT | 1U Rackmount Server, AMD EPYC 7002/7003, 8 DIMM 2TB
The Supermicro AS-1014S-WTRT is a versatile 1U single-socket rackmount server designed for database processing, storage, data center applications, and firewall deployments. Supporting AMD EPYC 7002 and 7003 series processors up to 280W TDP, it delivers up to 64 cores of processing power with 8 DDR4 DIMM slots supporting up to 2TB of ECC memory at 3200MHz. The system features dual 10GBase-T networking, 4 hot-swap 3.5" SATA bays with optional NVMe expansion, 3 PCIe 4.0 slots, and redundant 500W Platinum-rated power supplies for reliable enterprise performance. -
Vendor:Supermicro
Supermicro AS-1015CS-TNR | H13 CloudDC 1U Rackmount Server, AMD EPYC 9004/9005
AS-1015CS-TNR
Vendor:SupermicroSupermicro AS-1015CS-TNR | H13 CloudDC 1U Rackmount Server, AMD EPYC 9004/9005
The Supermicro AS-1015CS-TNR is a single-socket 1U CloudDC rackmount server designed for cloud computing, web hosting, edge nodes, and value IaaS deployments. Powered by AMD EPYC 9004/9005 series processors with support for up to 128 cores, it features 12 DDR5 DIMM slots supporting up to 3TB memory at 6400MT/s, 4 hot-swap 3.5-inch hybrid NVMe/SAS/SATA drive bays, dual AIOM OCP 3.0 networking slots, 2 PCIe 5.0 x16 expansion slots, and dual redundant 860W Platinum power supplies. Compact, scalable, and optimized for high-density data center environments. -
Vendor:Supermicro
Supermicro AS-1024US-TRT | Ultra 1U Dual AMD EPYC 7002/7003 Server, 8TB DDR4
AS-1024US-TRT
Vendor:SupermicroSupermicro AS-1024US-TRT | Ultra 1U Dual AMD EPYC 7002/7003 Server, 8TB DDR4
The Supermicro AS-1024US-TRT is a high-performance 1U rackmount server designed for virtualization, cloud computing, and enterprise workloads. Supporting dual AMD EPYC 7003/7002 series processors with up to 8TB DDR4-3200MHz memory across 32 DIMM slots, this Ultra platform delivers exceptional compute density. Equipped with 4 hot-swap 3.5-inch hybrid drive bays supporting SATA, SAS3, or NVMe, dual 10GbE networking, PCIe 4.0 expansion, and redundant 1000W Titanium power supplies, the AS-1024US-TRT offers the flexibility and reliability required for mission-critical data center deployments. -
Vendor:Supermicro
Supermicro AS-1115HS-TNR | Hyper 1U Server, AMD EPYC 9005/9004, 24x DDR5, 8x 2.5" NVMe/SAS/SATA, PCIe 5.0
AS-1115HS-TNR
Vendor:SupermicroSupermicro AS-1115HS-TNR | Hyper 1U Server, AMD EPYC 9005/9004, 24x DDR5, 8x 2.5" NVMe/SAS/SATA, PCIe 5.0
The Supermicro AS-1115HS-TNR is a high-density 1U rackmount server built for enterprise virtualization, AI inference, cloud computing, and software-defined storage. Supporting a single AMD EPYC 9004/9005 series processor with up to 192 cores, 24 DDR5 DIMM slots for up to 6TB of memory, and 8 hot-swap 2.5-inch NVMe/SAS/SATA drive bays, this platform delivers exceptional compute and memory capacity in a compact form factor. With PCIe 5.0 expansion slots, AIOM OCP 3.0 networking, and dual redundant 1200W Titanium-level power supplies, the AS-1115HS-TNR is engineered for demanding data center workloads. -
Vendor:Supermicro
Supermicro AS-1124US-TNRP | Dual AMD EPYC 7002/7003 1U Rack Server, 8TB DDR4, 12x NVMe
AS-1124US-TNRP
Vendor:SupermicroSupermicro AS-1124US-TNRP | Dual AMD EPYC 7002/7003 1U Rack Server, 8TB DDR4, 12x NVMe
The Supermicro AS-1124US-TNRP is a high-density 1U rackmount server engineered for virtualization, cloud computing, and enterprise workloads. Supporting dual AMD EPYC 7002/7003 series processors with up to 128 cores total, 8TB DDR4 memory across 32 DIMM slots, and 12 hot-swap NVMe drive bays, this system delivers exceptional compute, memory bandwidth, and ultra-fast storage performance. Equipped with quad 10GbE connectivity and redundant titanium-rated power supplies, it combines enterprise reliability with PCIe 4.0 expandability. -
Vendor:Supermicro
Supermicro AS-1125HS-TNR | Dual AMD EPYC 9004/9005 1U Rack Server, 320 Cores
AS-1125HS-TNR
Vendor:SupermicroSupermicro AS-1125HS-TNR | Dual AMD EPYC 9004/9005 1U Rack Server, 320 Cores
The Supermicro AS-1125HS-TNR is a high-density 1U dual-socket rackmount server supporting AMD EPYC 9004/9005 series processors with up to 320 cores and 640 threads. Designed for virtualization, AI inference, software-defined storage, and cloud computing, it delivers exceptional performance with up to 6TB DDR5 memory across 24 DIMM slots, up to 12 hot-swap 2.5-inch NVMe/SAS/SATA drive bays, and PCIe 5.0 expansion. Dual redundant Titanium-level power supplies ensure reliability for mission-critical enterprise workloads. -
Vendor:Supermicro
Supermicro AS-2014S-TR | 2U Single-Socket Rackmount Server, 8 DIMM, 12x 3.5" SATA
AS-2014S-TR
Vendor:SupermicroSupermicro AS-2014S-TR | 2U Single-Socket Rackmount Server, 8 DIMM, 12x 3.5" SATA
The Supermicro AS-2014S-TR is a 2U single-socket rackmount server designed for backup storage, web servers, and database applications. It supports AMD EPYC 7002/7003 series processors with up to 2TB DDR4-3200MHz memory across 8 DIMM slots. The system features 12 hot-swap 3.5-inch SATA3 drive bays plus 2 rear 2.5-inch SATA3 bays, dual 1GbE networking, and 920W redundant platinum-level power supplies for high-availability deployments. -
Vendor:Supermicro
Supermicro AS-2015CS-TNR | H13 CloudDC 2U Single-Socket Server, AMD EPYC 9004/9005
AS-2015CS-TNR
Vendor:SupermicroSupermicro AS-2015CS-TNR | H13 CloudDC 2U Single-Socket Server, AMD EPYC 9004/9005
The Supermicro AS-2015CS-TNR is a 2U single-socket rackmount server engineered for cloud computing, virtualization, and edge deployments. Powered by AMD EPYC 9004 or 9005 series processors with up to 160 cores, it features 12 DDR5 DIMM slots supporting up to 3TB of memory, 12 hot-swap 3.5 or 2.5-inch hybrid drive bays for NVMe, SAS, or SATA storage, and PCIe 5.0 expansion slots with dual AIOM OCP 3.0 networking. Ideal for dense compute nodes, value IaaS, CDN services, and storage headnodes requiring high I/O bandwidth and platform efficiency. -
Vendor:Supermicro
Supermicro AS-2015HS-TNR | H13 Hyper 2U Rack Server, AMD EPYC 9004/9005, 6TB DDR5
AS-2015HS-TNR
Vendor:SupermicroSupermicro AS-2015HS-TNR | H13 Hyper 2U Rack Server, AMD EPYC 9004/9005, 6TB DDR5
The Supermicro AS-2015HS-TNR is a 2U rackmount server built on the H13SSH motherboard, supporting single AMD EPYC 9004 and 9005 series processors with up to 128 cores. Designed for virtualization, AI inference, cloud computing, and software-defined storage, it delivers exceptional scalability with up to 6TB DDR5 memory across 24 DIMM slots and 12 hot-swap 3.5-inch drive bays supporting NVMe, SATA, and SAS. Flexible PCIe 5.0 expansion supports up to 8 slots and includes OCP 3.0 AIOM networking, dual redundant 1200W Titanium power supplies, and comprehensive IPMI 2.0 remote management. -
Vendor:Supermicro
Supermicro AS-2024S-TR | 2U Dual AMD EPYC 7002/7003 Rackmount Server, 16 DIMM
AS-2024S-TR
Vendor:SupermicroSupermicro AS-2024S-TR | 2U Dual AMD EPYC 7002/7003 Rackmount Server, 16 DIMM
The Supermicro AS-2024S-TR is a 2U mainstream rackmount server engineered for virtualization, enterprise computing, and data center workloads. It supports dual AMD EPYC 7002/7003 series processors with up to 240W TDP, up to 4TB DDR4-3200MHz memory across 16 DIMM slots, and 12 hot-swap 3.5"/2.5" hybrid drive bays with flexible SATA/NVMe configurations. With six PCIe 4.0 expansion slots, dual 1GbE networking, and redundant 920W Platinum-rated power supplies, this server delivers exceptional performance, scalability, and reliability for mission-critical applications.
Why Choose XS Network Tech?
We are a trusted partner for businesses of all sizes, including government departments, data centres, and service providers. Our expert team in sales, logistics, and customer service ensures that your needs are met with speed and precision, from pre-sales consultation to order fulfilment. With a commitment to fast delivery, sustainability, and a wide inventory, XS Network Tech is your go-to source for IT hardware. Trust us for quality, fast responses, and a hassle-free experience every time.