• Vibrant pink glossy Juniper QSFP-100G-SR1P2 100G transceiver sticker
1 1

Juniper

Juniper QSFP-100G-SR1P2 | 100G QSFP28 | 100GBASE-SR1.2 BiDi | 850/910nm | OM5 MMF 150m (OM4 100m) | LC duplex | 0–70C

QSFP-100G-SR1P2

POA
POA
POA
Sale Sold out
Taxes included. Shipping calculated at checkout.

Description

Compact 100G QSFP28 SR1.2 bidirectional transceiver for duplex MMF runs where MPO cabling isn’t available. Uses two wavelengths on each fiber to deliver 100GbE over LC with up to 150 m on OM5 (100 m on OM4).

Features

- Duplex LC BiDi—easy 100G upgrades without MPO cabling
- Up to 150 m over OM5 for flexible campus and aggregation runs
- Low power QSFP28 design with DOM/DDM
- Standards-based host interface for broad switch/router compatibility
- Hot-swappable for minimized downtime

Warranty

All products sold by XS Network Tech include a 12-month warranty on both new and used items. Our in-house technical team thoroughly tests used hardware prior to sale to ensure enterprise-grade reliability.

All technical data should be verified on the manufacturer data sheets.

View full details

specs-tabs

Technical Specifications

FAQs

Technical Specifications

- Form factor: QSFP28 (MSA compliant)
- Data rate: 100GbE (103.125 Gb/s line rate)
- Optical standard: 100GBASE-SR1.2 (bidirectional)
- Wavelengths: 850 nm and 910 nm (BiDi per fiber)
- Fiber type: MMF OM5 (backward compatible with OM4/OM3)
- Connector: LC duplex
- Reach: up to 150 m on OM5; up to ~100 m on OM4 (typical)
- Operating temperature: 0 to 70°C (commercial)
- Power consumption: ≤3.5 W (typical)
- Digital diagnostics (DDM/DOM): supported
- Host interface: 4 x 25G electrical lanes (CAUI-4)
- Compliance: MSA, RoHS

FAQs

Q: Will this BiDi module interoperate with standard SR4 MPO optics?
A: No. SR1.2 BiDi uses LC duplex and two wavelengths per fiber, whereas SR4 uses parallel MPO-12. Both ends must use matching SR1.2 BiDi modules.

Q: Can I run it over OM4 fiber?
A: Yes. Typical reach is up to about 100 m on OM4. For full 150 m reach, use OM5.

Q: Does it support DOM/DDM monitoring?
A: Yes, it provides digital optical monitoring for key parameters such as temperature, TX/RX power, and supply voltage.

Q: Which ports is it compatible with?
A: Any QSFP28 100GbE port that supports SR1.2/BiDi operation. Check your platform’s transceiver compatibility list.

Q: Is special patching required?
A: Use standard LC duplex MMF patch cords with correct polarity; no MPO cabling is required.

  • Related products

Recently Viewed

  • Request a Quote

    Looking for competitive pricing? Submit a request, and our team will provide a tailored quote that fits your needs.

  • Contact Us Directly

    Have a question or need immediate assistance? Call us for expert advice and real-time support.

    Call us Now  

  • Contact Us Directly

    Have a question or need immediate assistance? Call us for expert advice and real-time support.

    Contact us