Cisco C9400-PWR-3200ACT | 3200W AC Power Supply, Titanium, Hot-Swappable

Q: What is the difference between C9400-PWR-3200AC and C9400-PWR-3200ACT?
A: The C9400-PWR-3200ACT features 80 PLUS Titanium efficiency certification, offering higher energy efficiency than the Platinum-rated C9400-PWR-3200AC. The ACT variant reduces operational costs through minimized power waste while delivering the same 3200W output. Both support hot-swap and N+1 redundancy for Catalyst 9400 chassis.

Q: Can this power supply support full UPOE+ on all ports simultaneously?
A: Yes, the C9400-PWR-3200ACT provides 3200W combined output to support IEEE 802.3af/at/bt and Cisco UPOE+ (up to 90W per port) across all ports simultaneously in compatible Catalyst 9400 chassis configurations, making it ideal for high-density PoE deployments with IP phones, cameras, and wireless access points.

Q: Is the C9400-PWR-3200ACT compatible with all Catalyst 9400 chassis?
A: Yes, this power supply is compatible with all Catalyst 9400 Series modular chassis, including the C9404R (4-slot), C9407R (7-slot), and C9410R (10-slot) models. It can be deployed in N+1 or N+N redundant configurations for maximum availability.

Q: What is the input voltage requirement for full 3200W output?
A: The C9400-PWR-3200ACT requires 200-240V AC input to deliver full 3200W output. When powered by 100-120V AC, output is reduced to 1570W. The power supply accepts 50/60Hz nominal frequency with a full operating range of 47-63Hz for global deployment flexibility.

Q: Does this power supply support hot-swap installation?
A: Yes, the C9400-PWR-3200ACT is fully hot-swappable. When redundant power supplies are installed, you can remove and replace a faulty unit without network downtime. The front panel features a release latch and cord-retention mechanism to prevent accidental removal during operation.