-
Vendor:Cisco
Cisco HWIC-1ADSL-M | 1x ADSL2/2+ Annex M (RJ-11), 24/3.3 Mbps max, ATM PPPoA/PPPoE, ISR HWIC
HWIC-1ADSL-M
Vendor:CiscoCisco HWIC-1ADSL-M | 1x ADSL2/2+ Annex M (RJ-11), 24/3.3 Mbps max, ATM PPPoA/PPPoE, ISR HWIC
Single-port ADSL2/2+ Annex M HWIC that brings high-performance DSL termination directly into ISR routers. Supports full-rate ADSL2+ with Annex M for higher upstream bandwidth and common encapsulations for seamless integration with service providers. Ideal for branch WAN uplinks where simplicity and control are required. -
Vendor:Cisco
Cisco HWIC-1ADSLI | 1-port ADSL/ADSL2/2+ over ISDN (Annex B) | G.992.1/3/5 | ATM | RJ‑11 | ISR HWIC
HWIC-1ADSLI
Vendor:CiscoCisco HWIC-1ADSLI | 1-port ADSL/ADSL2/2+ over ISDN (Annex B) | G.992.1/3/5 | ATM | RJ‑11 | ISR HWIC
Annex B ADSL HWIC providing ADSL/ADSL2/ADSL2+ connectivity over ISDN lines for regions and providers using ISDN-based splits. Designed for reliable broadband access on copper, integrating seamlessly with ISR routing, QoS, and security features. -
Vendor:Cisco
Cisco HWIC-1B-U | 1x ISDN BRI U (2-wire), 2x64K + 16K D, NT1 integrated
Single-port ISDN BRI U-interface HWIC providing direct 2-wire U-loop connectivity for dial/backup or primary WAN access. Supports two 64 kbps B-channels with a 16 kbps D-channel, PPP/MLPPP, and typical DDR use cases. Integrated NT1 simplifies deployment where applicable. -
Vendor:Cisco
Cisco HWIC-1CE1T1-PRI | 1x T1/E1 Channelized + ISDN PRI HWIC | RJ-48C | CSU/DSU | T1: 1.544M ESF/SF B8ZS/AMI | E1: 2.048M G.704 HDB3 | NxDS0 (1–24/31)
Add carrier-grade T1/E1 connectivity to your router with a single-port channelized interface supporting ISDN PRI and data. Select T1 or E1 per port, use integrated CSU/DSU for line build-out and clocking, and terminate voice PRI trunks or fractional data (NxDS0). Standards-based framing and coding ensure seamless interop with service providers and PBX gear via RJ-48C copper. Ideal for branch voice gateways, PBX PRI handoff, and WAN access over T1/E1. -
Vendor:Cisco
Cisco HWIC-1DSU-T1 | 1-port T1 CSU/DSU HWIC | RJ-48C | 1.544 Mb/s (NxDS0) | ESF/SF, B8ZS/AMI | PPP/HDLC/Frame Relay | ISR 1800/2800/3800
Provide carrier-grade T1 WAN connectivity with an integrated CSU/DSU, eliminating external CPE. Supports fractional or full T1 with standard framing/line coding options, plus PPP, HDLC, and Frame Relay encapsulations. IOS-driven diagnostics include loopbacks and alarms for rapid troubleshooting. -
Vendor:Cisco
Cisco HWIC-1FE | 1-port Fast Ethernet HWIC | 10/100 RJ-45 (802.3/802.3u) | Routed L3 port with 802.1Q subinterfaces | Auto-negotiation & Auto MDI/MDIX | ISR 2800/3800 required
Add a dedicated routed Fast Ethernet interface to ISR 2800/3800 routers for WAN backup, DMZ, or segregated services. The 10/100 RJ-45 port supports 802.1Q subinterfaces, QoS, and ACLs (IOS dependent), with auto-negotiation and Auto MDI/MDIX for simple cabling. -
Vendor:Cisco
Cisco HWIC-1GE-SFP | 1-port 1G SFP HWIC | 1000BASE-X SFP slot (SX/LX/ZX; 1G only) | Routed GE with 802.1Q subinterfaces | Fiber LC via SFP | ISR 2800/3800
Add a flexible, SFP-based Gigabit Ethernet routed interface for fiber or copper handoffs on ISR 2800/3800. Ideal for metro-E, data center, or provider uplinks. Supports 802.1Q subinterfaces and IOS routing/QoS features. SFP transceiver sold separately. -
Vendor:Cisco
Cisco HWIC-2CE1T1-PRI | 2x T1/E1 Channelized + ISDN PRI HWIC | RJ-48C | CSU/DSU | T1: 1.544M ESF/SF B8ZS/AMI | E1: 2.048M G.704 HDB3 | NxDS0 (1–24/31)
Dual-port channelized T1/E1 interface for routers, combining ISDN PRI and fractional data on each port. Configure each port independently for T1 or E1, leverage the integrated CSU/DSU for line build-out and clocking, and terminate voice PRI trunks or NxDS0 circuits. Standards-based framing/coding over RJ-48C ensures easy interop with telco and PBX environments. Ideal for multi-trunk voice gateways and branch WAN aggregation. -
Vendor:Cisco
Cisco HWIC-2FE | 2x 10/100 Fast Ethernet routed ports; 802.1Q VLAN; Auto-MDI/MDIX; HWIC
HWIC-2FE
Vendor:CiscoCisco HWIC-2FE | 2x 10/100 Fast Ethernet routed ports; 802.1Q VLAN; Auto-MDI/MDIX; HWIC
Adds two routed Fast Ethernet interfaces to expand LAN/WAN edge connectivity on compatible ISR platforms. Ideal for segmenting networks, VLAN trunking, or additional routed links. -
Vendor:Cisco
Cisco HWIC-2SHDSL | G.SHDSL 2‑pair, 2/4‑wire, up to 2.3 Mbps per pair, symmetric copper WAN, router HWIC
HWIC-2SHDSL
Vendor:CiscoCisco HWIC-2SHDSL | G.SHDSL 2‑pair, 2/4‑wire, up to 2.3 Mbps per pair, symmetric copper WAN, router HWIC
Deliver business-class symmetric DSL over existing copper with a 2-pair G.SHDSL WAN interface. Operates in 2-wire or 4-wire modes for extended reach or higher aggregate throughput, making it ideal for dedicated point-to-point access and telco handoffs. -
Vendor:Cisco
Cisco HWIC-2T | 2x Serial (Smart Serial) WAN, sync/async up to 8 Mbps/port; PPP/HDLC/Frame Relay; HWIC single-wide
Dual-port serial HWIC for adding flexible WAN connectivity to ISR platforms. Supports synchronous/asynchronous operation and common WAN encapsulations for branch routing. -
Vendor:Cisco
Cisco HWIC-4ESW | 4x 10/100 L2 switch module | PoE: None | Uplinks: 0 | License: N/A | HWIC
HWIC-4ESW
Vendor:CiscoCisco HWIC-4ESW | 4x 10/100 L2 switch module | PoE: None | Uplinks: 0 | License: N/A | HWIC
Provide compact Fast Ethernet Layer 2 switching inside ISR routers. This 4-port 10/100 EtherSwitch HWIC is ideal for small branch LANs needing VLANs and QoS without an external switch. No PoE on this model. -
Vendor:Cisco
Cisco HWIC-4ESW-POE | 4x 10/100 switch HWIC, 802.3af PoE (up to 15.4W/port), backplane uplink, L2 VLAN/QoS
HWIC-4ESW-POE
Vendor:CiscoCisco HWIC-4ESW-POE | 4x 10/100 switch HWIC, 802.3af PoE (up to 15.4W/port), backplane uplink, L2 VLAN/QoS
Compact 4-port 10/100 Layer 2 EtherSwitch module with integrated PoE daughter card for powering IP endpoints. Ideal for branch routers needing embedded switching with VLAN segmentation and QoS for voice/video. Backplane uplink eliminates external cabling and simplifies management through the host router. -
Vendor:Cisco
Cisco HWIC-4SHDSL | G.SHDSL 4‑pair w/ IMA, 2/4/8‑wire, up to 2.3 Mbps per pair, ATM IMA bonding, router HWIC
Aggregate multiple copper pairs for higher symmetric bandwidth with a 4-pair G.SHDSL interface featuring Inverse Multiplexing over ATM (IMA). Ideal for sites needing scalable throughput and resiliency over existing copper infrastructure. -
Vendor:Cisco
Cisco HWIC-4SHDSL-E | G.SHDSL EFM 1-port, 4-pair bonding, up to 22.8 Mbps symmetric
HWIC-4SHDSL-E
Vendor:CiscoCisco HWIC-4SHDSL-E | G.SHDSL EFM 1-port, 4-pair bonding, up to 22.8 Mbps symmetric
High-density G.SHDSL EFM HWIC delivering symmetric Ethernet-over-copper using up to four bonded copper pairs. Ideal for sites needing carrier-class, SLA-backed access where fiber is unavailable, with standards-based 802.3ah OAM and loop bonding for resilience. -
Vendor:Cisco
Cisco HWIC-8A | 8-port async serial HWIC | RJ-45 RS-232 | terminal/OOB consolidation
HWIC-8A
Vendor:CiscoCisco HWIC-8A | 8-port async serial HWIC | RJ-45 RS-232 | terminal/OOB consolidation
Provide high-density RS‑232 asynchronous serial connectivity with eight RJ‑45 ports on a single HWIC for terminal server and out-of-band management deployments. Simplify cabling and consolidate legacy serial devices on modular routers.
Why Choose XS Network Tech?
We are a trusted partner for businesses of all sizes, including government departments, data centres, and service providers. Our expert team in sales, logistics, and customer service ensures that your needs are met with speed and precision, from pre-sales consultation to order fulfilment. With a commitment to fast delivery, sustainability, and a wide inventory, XS Network Tech is your go-to source for IT hardware. Trust us for quality, fast responses, and a hassle-free experience every time.