-
Vendor:HPE
HPE JG422A | 8x 1GbE RJ-45 HMIM module, 10/100/1000 autosensing, non-PoE, MSR4000 compatible
JG422A
Stock Status: Enquire
Vendor:HPEHPE JG422A | 8x 1GbE RJ-45 HMIM module, 10/100/1000 autosensing, non-PoE, MSR4000 compatible
An HMIM expansion module that adds eight copper Gigabit Ethernet ports to modular services routers in the MSR4000 family. Ideal for high-density LAN aggregation or routed access, it supports auto-negotiation and auto MDI/MDIX for seamless deployment. The module integrates with the chassis operating system for VLANs, link aggregation, QoS, and monitoring consistent with platform capabilities. Designed for reliability with line-rate forwarding and simple installation. -
Vendor:HPE
HPE JG425A | HMIM module | 8x 1GbE SFP (1000BASE-X) | standard 1G SFP support
JG425A
Stock Status: Enquire
Vendor:HPEHPE JG425A | HMIM module | 8x 1GbE SFP (1000BASE-X) | standard 1G SFP support
Add dense fiber connectivity to MSR routers with an 8-port 1GbE SFP (1000BASE-X) HMIM, ideal for aggregation, WAN, or secure DMZ segmentation. Supports standard 1G SFP optics for flexible deployments (SX/LX/BX/CU), with per-port independence for routing, QoS, and ACLs under Comware. Designed for routers with HMIM slots to expand interface capacity without external switches. -
Vendor:HPE
HPE JG426A | MSR HMIM 24x 10/100/1000Base-T switch module, Layer2, non-PoE
JG426A
Stock Status: Enquire
Vendor:HPEHPE JG426A | MSR HMIM 24x 10/100/1000Base-T switch module, Layer2, non-PoE
Expand MSR chassis with 24 additional Gigabit Ethernet RJ45 switch ports. This HMIM form-factor module delivers Layer 2 switching with VLAN, link aggregation, and spanning tree capabilities, ideal for branch aggregation and LAN extension inside modular MSR routers. It is a non-PoE switching module designed for MSR platforms that support HMIM slots. -
Vendor:HPE
HPE JG427A | HMIM PoE switch module | 24x 1GbE RJ45 PoE/PoE+ (802.3af/at) | integrated L2 access
JG427A
Stock Status: Enquire
Vendor:HPEHPE JG427A | HMIM PoE switch module | 24x 1GbE RJ45 PoE/PoE+ (802.3af/at) | integrated L2 access
Convert an HMIM slot into a 24-port 10/100/1000 RJ45 PoE/PoE+ access switch, consolidating wiring-closet power and switching into the MSR chassis. Ideal for powering IP phones, cameras, and access points while leveraging router-based policy, segmentation, and WAN services. Power budget is determined by the host router’s PSU configuration. -
Vendor:HPE
HPE JG431A | HMIM voice module | 2x E1/PRI (G.703/G.704) | CAS and PRI signaling
JG431A
Stock Status: Enquire
Vendor:HPEHPE JG431A | HMIM voice module | 2x E1/PRI (G.703/G.704) | CAS and PRI signaling
Provide two E1 digital voice circuits to MSR routers for PBX interconnect, PSTN access, or TDM-to-IP gateway applications. Supports PRI (ISDN) and CAS signaling, with framing per G.704 and physical layer per G.703, enabling flexible integration into legacy and hybrid voice networks. DSP/voice resources on the host platform may be required for transcoding or advanced voice features. -
Vendor:HPE
HPE JG442A | HMIM sync serial module | 4x synchronous serial | multi-protocol (HDLC/PPP/Frame Relay)
JG442A
Stock Status: Enquire
Vendor:HPEHPE JG442A | HMIM sync serial module | 4x synchronous serial | multi-protocol (HDLC/PPP/Frame Relay)
Add four enhanced synchronous serial interfaces to MSR routers for legacy WAN and industrial interconnects. Supports common encapsulations such as HDLC, PPP, and Frame Relay, with flexible clocking for point-to-point or hub-and-spoke designs. Interfaces presented via adapter cables for standards like V.35, X.21, and EIA-530. -
Vendor:HPE
HPE JG443A | 8x sync/async serial HMIM module | EIA-232/485 support | MSR expansion
JG443A
Stock Status: Enquire
Vendor:HPEHPE JG443A | 8x sync/async serial HMIM module | EIA-232/485 support | MSR expansion
Add eight flexible serial interfaces to compatible MSR routers for legacy WAN, industrial, and OOB console connectivity. Supports synchronous and asynchronous operation with common WAN encapsulations for broad interoperability. Ideal for POS, SCADA/telemetry, and multi-port console aggregation in branch or industrial environments. Compatible with MSR platforms that offer an HMIM slot; check your chassis documentation for slot availability and software support. -
Vendor:HPE
HPE JG510A | 48x 1G SFP access | 4x 10G SFP+ uplinks | 2x 40G QSFP+ | no PoE | Comware L3, IRF stacking
JG510A
Stock Status: Enquire
Vendor:HPEHPE JG510A | 48x 1G SFP access | 4x 10G SFP+ uplinks | 2x 40G QSFP+ | no PoE | Comware L3, IRF stacking
High-density 1GbE top-of-rack/aggregation switch with 10/40GbE uplinks and rich L2/L3 features for modern data center and campus cores. IRF enables multi-chassis stacking for simplified operations and fast convergence. Advanced QoS, ACLs, and dual-stack IPv4/IPv6 routing deliver predictable performance and security at scale. Designed for resilient deployments with flexible uplink options and comprehensive automation/telemetry. -
Vendor:HPE
HPE JG518B | Branch router | IPsec VPN, dynamic routing | SD-WAN ready | optional LTE via USB
JG518B
Stock Status: Enquire
Vendor:HPEHPE JG518B | Branch router | IPsec VPN, dynamic routing | SD-WAN ready | optional LTE via USB
Compact MSR branch platform delivering reliable WAN connectivity, integrated security, and rich Comware routing features for small sites. Supports encrypted site-to-site and remote-access VPNs alongside policy-based control for resilient, application-aware paths. Flexible Gigabit Ethernet interfaces and optional cellular connectivity via supported USB modems make it ideal for primary or backup WAN. Centralized management and zero-touch options streamline rollout across distributed branches. -
Vendor:HPE
HPE JG522A | 3G RF antenna extension cable | 2.8 m | low-loss coax
JG522A
Stock Status: Enquire
Vendor:HPEHPE JG522A | 3G RF antenna extension cable | 2.8 m | low-loss coax
Extend the placement of your cellular antenna for improved signal quality on MSR routers with 3G/WWAN modules. The 2.8 m low-loss RF cable allows flexible routing to windows or optimal signal locations while maintaining performance. Factory-terminated connectors ensure reliable attachment to supported router antenna ports and matching antennas. Use indoors or with appropriate outdoor/weatherproofing as required by the installation. -
Vendor:HPE
HPE JG527A | Modular switch PSU | 300W | input: 100–240V | 12V DC output | X351 form factor
JG527A
Stock Status: Enquire
Vendor:HPEHPE JG527A | Modular switch PSU | 300W | input: 100–240V | 12V DC output | X351 form factor
Enterprise-grade modular power supply delivering 300W of clean 12V DC for compatible Comware-based switches. Designed for high-availability deployments with support for dual-PSU redundancy in supported chassis. Field-replaceable design helps minimize downtime during maintenance windows. -
Vendor:HPE
HPE JG527A#ABG | Modular switch PSU | 300W | input: 100–240V | 12V DC output | X351 form factor
JG527A#ABG
Stock Status: Enquire
Vendor:HPEHPE JG527A#ABG | Modular switch PSU | 300W | input: 100–240V | 12V DC output | X351 form factor
300W modular power unit delivering stable 12V DC to compatible Comware switch backplanes. Designed for reliability with support for dual-PSU redundancy where platform-enabled. Field-replaceable for rapid service with minimal disruption. -
Vendor:HPE
HPE JG528A | X351 300W DC PSU, -48–60 VDC input to 12 VDC output
JG528A
Stock Status: Enquire
Vendor:HPEHPE JG528A | X351 300W DC PSU, -48–60 VDC input to 12 VDC output
Telecom‑grade DC power module delivering up to 300 W from a −48 to −60 VDC input, converting to a regulated 12 VDC bus for compatible Comware‑based chassis. Suitable for deployments with centralized DC plants, enabling flexible power options and PSU redundancy where supported by the host device. -
Vendor:HPE
HPE JG532A | Switch expansion module | slot-based I/O | ports and speed depend on platform | Comware-compatible
JG532A
Stock Status: Enquire
Vendor:HPEHPE JG532A | Switch expansion module | slot-based I/O | ports and speed depend on platform | Comware-compatible
Flexible switch expansion module engineered to add interfaces through a chassis slot on compatible Comware-based switches. Ideal for scaling uplinks or access interfaces to meet evolving network requirements. Designed for seamless backplane integration and simplified serviceability. -
Vendor:HPE
HPE JG535A | 10GbE SFP+ uplink module | 2x SFP+ ports | line‑rate | hot-swap
JG535A
Stock Status: Enquire
Vendor:HPEHPE JG535A | 10GbE SFP+ uplink module | 2x SFP+ ports | line‑rate | hot-swap
Add high-speed 10 Gigabit Ethernet uplinks to compatible switches with an SFP+ expansion module designed for reliable, line‑rate performance. Supports a wide range of 10G SFP+ optics and DAC/AOC cables for short and long‑reach applications. Ideal for server, storage, and backbone uplinks in campus or aggregation networks. -
Vendor:HPE
HPE JG544A | PoE PSU 56VDC | 720W output | AC 100–240V | hot-swap | X362 form factor
JG544A
Stock Status: Enquire
Vendor:HPEHPE JG544A | PoE PSU 56VDC | 720W output | AC 100–240V | hot-swap | X362 form factor
High-efficiency 56VDC PoE power supply delivering up to 720W to compatible switches. Designed for hot‑swap serviceability, redundancy, and scalable PoE budgets in enterprise campus deployments.
Why Choose XS Network Tech?
We are a trusted partner for businesses of all sizes, including government departments, data centres, and service providers. Our expert team in sales, logistics, and customer service ensures that your needs are met with speed and precision, from pre-sales consultation to order fulfilment. With a commitment to fast delivery, sustainability, and a wide inventory, XS Network Tech is your go-to source for IT hardware. Trust us for quality, fast responses, and a hassle-free experience every time.