Skip to product information
1 of 1

Cisco

Cisco PWR-RPS2300 | RPS 2300 6-Port Redundant Power System, 2 PSU Bays

SKU:PWR-RPS2300

Request Quote
Sale Sold out
Shipping calculated at checkout.

Stock Status: Enquire

20-min response

Need a quote or bulk pricing? Answered within 20 minutes, Sydney business hours.

Description

The RPS 2300 is a 1RU redundant power system that gives Catalyst switches and select Cisco routers seamless power failover, including PoE. It is built for wiring-closet deployments carrying converged data, voice and video traffic, where an internal power supply failure must not cause a switch reboot. With a separate AC circuit it can also protect against primary AC circuit failure, and it pairs well with a UPS for maximum availability.

This SKU is the chassis only, with six RPS ports and two power supply bays. Up to six devices can be connected, and two can be actively backed up at the same time. Failover takes less than 60 microseconds. Each RPS port can supply up to 300W at 12V or 800W at -52V. The bays accept the C3K-PWR-1150WAC or C3K-PWR-750WAC power supplies, and two installed modules must be the same type. A pair of 1150W modules provides 1600W at -52V and 540W at 12V.

Supported devices include Catalyst 2960-X, 2960-S, 3750-E, 3560-E and 3750v2 Series switches, Meraki MS220 switches and Cisco 3825, 2851, 2821 and 2811 ISRs. A field-replaceable fan module, BLWR-RPS2300=, cools the unit, and the RPS cable options are CAB-RPS2300-E= (22-pin) and CAB-RPS2300= (14-pin).

Enquire with XS Network Tech for new or used pricing and availability.

Features

- Complete internal power supply redundancy for up to two attached devices
- Hot insertion of external devices and modular power supplies
- Failover in under 60 µs prevents a switch reboot after an internal power failure
- Remote active/standby control of the whole RPS or of each of the six RPS ports
- Configurable RPS port priorities and failover policy, with first-come, first-served as the default
- Status, switch connectivity, power usage and failure history reporting via CLI, Cisco Network Assistant and CiscoWorks
- Supports data-only and PoE switches, and can provide AC source backup when separate circuits are used
- Front-panel and power supply LEDs show system and power status
- Field-replaceable fan module

Warranty

All products sold by XS Network Tech include a 12-month warranty on both new and used items. Our in-house technical team thoroughly tests used hardware prior to sale to ensure enterprise-grade reliability.

All technical data should be verified on the manufacturer data sheets.

View full details

specs-tabs

Collapsible content

Technical Specifications

FAQs

Technical Specifications

- Form factor: 1 RU, rack-mountable
- RPS ports: 6
- Power supply bays: 2 (1150W AC or 750W AC modules; two installed modules must be the same type)
- Compatible power supplies: C3K-PWR-1150WAC, C3K-PWR-750WAC
- Failover time: less than 60 µs
- DC output, 1 x C3K-PWR-750WAC: 12V 252W (21A); -52V 416W (8A)
- DC output, 2 x C3K-PWR-750WAC: 12V 540W (45A); -52V 832W (16A)
- DC output, 1 x C3K-PWR-1150WAC: 12V 252W (21A); -52V 800W (15.4A)
- DC output, 2 x C3K-PWR-1150WAC: 12V 540W (45A); -52V 1600W (30.8A)
- Maximum power per RPS port: 300W at 12V; 800W at -52V
- Heat dissipation, no load / full load: 95/724 BTU/hr (1 x 750W), 208/1299 BTU/hr (2 x 750W), 143/1056 BTU/hr (1 x 1150W), 276/1963 BTU/hr (2 x 1150W)
- Dimensions without power supplies (H x W x D): 1.75 x 17.5 x 17.15 in. (4.5 x 44.5 x 43.6 cm)
- Dimensions with 1 or 2 x C3K-PWR-1150WAC (H x W x D): 1.75 x 17.5 x 20.6 in. (4.5 x 44.5 x 52.3 cm)
- Weight without power supplies: 10.8 lb (4.9 kg)
- Weight with 2 x 1150W PSU: 22 lb (10 kg); with 2 x 750W PSU: 18.6 lb (8.5 kg)
- Fan module: BLWR-RPS2300=, up to 45 CFM at full load
- RPS cable length: 1.5 m (4.9 ft), 22-pin connector on the RPS end
- MTBF: 170,000 hours (with two PSUs and blower)
- Power supply operating temperature: -5 to 45 C (23 to 113 F)
- Power supply operating humidity: 10 to 85% non-condensing
- Power supply operating altitude: 3000 m (10,000 ft) up to 45 C

FAQs

Q: Does the RPS 2300 need a licence or subscription?
A: No. It is a hardware power system and needs no licence or subscription.

Q: Which power supplies does this chassis use?
A: It takes the C3K-PWR-1150WAC (115-240 VAC, 1150W) or the C3K-PWR-750WAC (100-240 VAC, 750W). The 1150W module backs up 48 ports of Class 3 15.4W PoE, and the 750W module backs up 24 ports of Class 3 PoE. If two modules are fitted they must be the same type.

Q: Which devices can the RPS 2300 back up?
A: It supports Catalyst 2960-X, 2960-Plus, 2960-S, 2960, 2950, 3750-E, 3750v2, 3750, 3560-E, 3560v2, 3560 and 3550 Series switches, select Catalyst Express 500 PoE models, Meraki MS220 24 and 48 port switches, and Cisco 3825, 2851, 2821 and 2811 ISRs.

Q: Which cable connects the RPS 2300 to a switch?
A: The RPS end uses a 22-pin connector on a 1.5 m cable. The switch end is 22-pin with CAB-RPS2300-E= or 14-pin with CAB-RPS2300=, so choose the cable that matches your switch.

Q: How many devices can it back up at once?
A: Up to six devices can be connected to the six RPS ports, and two of them can be actively backed up at the same time.

Recently Viewed

  • Request a Quote

    Looking for competitive pricing? Submit a request, and our team will provide a tailored quote that fits your needs.

  • Contact Us Directly

    Have a question or need immediate assistance? Call us for expert advice and real-time support.

    Call us Now  
  • Contact Us Directly

    Have a question or need immediate assistance? Call us for expert advice and real-time support.

    Contact us