Skip to product information
1 of 1

Cisco

Cisco PWR-C1-350WAC/2 | Catalyst 3850 350W AC Power Supply, Config 1, Secondary

SKU:PWR-C1-350WAC/2

Request Quote
Sale Sold out
Shipping calculated at checkout.

Stock Status: Enquire

Condition
20-min response

Need a quote or bulk pricing? Answered within 20 minutes, Sydney business hours.

Description

This hot-swappable 350W AC power supply is built for Cisco Catalyst 3850 and 3650 series switches. It is the Config 1 form factor, supplied as the secondary unit, so it suits campus and access deployments that need a spare or redundant power module.

The module accepts an autoranging 100 to 240 VAC input at 50-60 Hz and delivers 350W of output at -56 V and 6.25 A. At full load it draws about 398W of input power. Because it is the 350W Config 1 unit, it is best matched to non-PoE or low-power switch configurations rather than high-budget PoE builds.

Recommended cable: Blue Cable Co® C14 to C15 power cable. Its slim C15 plug fits this power supply’s cable management bracket.

It works with Catalyst 3850 and 3650 switches that use Config 1 power supplies, including 3850-24T and 3850-48T models. Check the Cisco hardware installation guide to confirm the correct power supply for your exact switch model and PoE requirements.

Enquire with XS Network Tech for new or used pricing and availability.

Features

- Hot-plug capable, so it can be replaced without shutting the switch down
- Supports redundant power operation for higher uptime
- Autoranging 100-240 VAC input for deployment in any region
- Config 1 form factor shared across Catalyst 3850 and 3650 platforms
- Delivers 350W output at -56 V for access and campus switch configurations

Warranty

All products sold by XS Network Tech include a 12-month warranty on both new and used items. Our in-house technical team thoroughly tests used hardware prior to sale to ensure enterprise-grade reliability.

All technical data should be verified on the manufacturer data sheets.

View full details

specs-tabs

Collapsible content

Technical Specifications

FAQs

Technical Specifications

- Maximum output power: 350W
- Input voltage: 100 to 240 VAC, autoranging
- Input frequency: 50-60 Hz
- Input current: 4-2 A
- Output: -56 V at 6.25 A
- Total input: 1357 BTU per hour, 398W
- Total output: 1194 BTU per hour, 350W
- Type: Hot-plug redundant plug-in power supply module
- Power supply form factor: Config 1
- Role: Secondary
- Dimensions (H x W x D): 40.1 x 82.55 x 310.1 mm
- Weight: 1.1 kg (2.4 lb)

FAQs

Q: Which switches does this power supply work with?
A: It fits Catalyst 3850 and 3650 series switches that use Config 1 power supplies, including 3850-24T and 3850-48T models.

Q: What input voltage does it need?
A: It accepts an autoranging 100 to 240 VAC input at 50-60 Hz, drawing 4-2 A, so it can be used on standard mains supplies worldwide.

Q: Is it suitable for PoE switch models?
A: The 350W output suits non-PoE or low-power configurations. For PoE models with larger power budgets, check the Cisco hardware installation guide to select the right power supply.

Q: Can it be replaced while the switch is running?
A: Yes. It is a hot-plug module, so it can be swapped while the switch stays powered when it is installed in a redundant configuration.

Q: What does Secondary mean in this part number?
A: It denotes the secondary unit in a Config 1 power setup, used as the spare or redundant supply alongside the primary power supply.

Recently Viewed

  • Request a Quote

    Looking for competitive pricing? Submit a request, and our team will provide a tailored quote that fits your needs.

  • Contact Us Directly

    Have a question or need immediate assistance? Call us for expert advice and real-time support.

    Call us Now  
  • Contact Us Directly

    Have a question or need immediate assistance? Call us for expert advice and real-time support.

    Contact us