-
Vendor:Cisco
Cisco CVR-QSFP-SFP10G | 10G adapter | QSFP+ to SFP+ (QSA) | 10GbE pass-through | wavelength/reach: per SFP+ | connector: per SFP+
Compact form-factor converter that lets a QSFP+ 40G port accept an SFP+ 10G transceiver, enabling single-lane 10GbE operation from a QSFP+ cage. Optical characteristics depend on the inserted SFP+ module (e.g., SR, LR, ER). Ideal for gradual 10G migrations and mixed-speed environments. -
Vendor:Cisco
Cisco CVR-QSFP28-SFP25G | 25G adapter | QSFP28 to SFP28 (QSA28) | 25GbE pass-through | wavelength/reach: per SFP28 | connector: per SFP28
Form-factor converter that lets a QSFP28 100G port accept an SFP28 25G transceiver for single-lane 25GbE operation. Optical characteristics (wavelength, reach, connector) are determined by the inserted SFP28 module. Ideal for 25G migrations on 100G-capable hardware. -
Vendor:Cisco
Cisco CVR-TRAY-8 | Mount tray for CVR-4SFP10G-QSFP adapters | multi-slot organizing tray | streamlined rack integration
Purpose-built tray to neatly mount and organize CVR-4SFP10G-QSFP reverse breakout adapters for clean cabling and simplified serviceability in dense deployments. -
Vendor:Cisco
Cisco CVR-X2-SFP | X2-to-SFP adapter | speed: 1G | form: X2-to-SFP | base std: 1000BASE-X | hot-swappable | DOM pass‑through
Convert X2 host ports to accept 1G SFP optics. Ideal for mixed-speed environments and gradual migration away from legacy X2 optics while retaining platform investment. Supports a wide range of 1000BASE-X fiber SFPs and 1000BASE-T copper SFPs, subject to platform support. -
Vendor:Cisco
Cisco CVR-X2-SFP10G | X2-to-SFP+ adapter | speed: 10G | form: X2-to-SFP+ | base std: 10GBASE-X | hot-swappable | DOM pass‑through
Adapt legacy X2 ports to accept 10G SFP+ transceivers. Ideal for standardizing on SFP+ optics while retaining X2-based platforms. Supports common 10GBASE optical standards when used with corresponding SFP+ modules (platform dependent). -
Vendor:Cisco
Cisco CW-ACC-9179-A-00 | environment pack | indoor | for CW9179F | seals, dust covers, strain relief | deployment accessory kit
Accessory kit tailored for indoor deployments of CW9179F, providing port dust caps, sealing components, and cable strain-relief parts to help maintain enclosure integrity and tidy cabling in conditioned environments. Simplifies installation and protects unused ports from contaminants. -
Vendor:Cisco
Cisco CW-ACC-9179-B-00 | environment pack | outdoor | for CW9179F | weather seals, dust caps, cable glands | deployment accessory kit
Accessory kit for outdoor deployments of CW9179F, providing weather-focused sealing components, dust caps for unused ports, and cable strain-relief/gland parts to help maintain enclosure integrity in exposed environments. Supports clean terminations and added protection against moisture and debris. -
Vendor:Cisco
Cisco CW-ACC-9179-CVR | Solar shield kit for 9179F outdoor AP | reduces solar heat load | UV-resistant metal | fits standard outdoor mounts
Purpose-built sun deflector for the 9179F outdoor access point to reduce radiant heat gain and help keep radios within thermal limits in high-solar environments. Installs to existing outdoor brackets with included hardware; ideal for rooftops, poles, and wall sites. -
Vendor:Cisco
Cisco CW-ACC-DESK1-00 | Desktop stand for wall-plate access points | tool-free drop-in | anti-slip base | cable passthrough
Convert a wall-plate access point into a stable desktop unit for labs, demos, or temporary deployments. The cradle secures the AP, protects surfaces, and routes cables neatly for quick, professional setups. -
Vendor:Cisco
Cisco CW-ACC-GPS1 | USB GNSS receiver for controller/AP sync | GPS/GNSS timing & location | plug-and-play USB
Provide precise GNSS timing and location to compatible access points or controllers via USB. Ideal for location services, time synchronization, and site surveys where an external GNSS feed enhances accuracy. -
Vendor:Cisco
Cisco CW-ACC-N2RPTNC | Antenna adapter 4‑pack: N‑Type ↔ RP‑TNC, 50Ω, Wi‑Fi 2.4/5 GHz, low‑loss fit
CW-ACC-N2RPTNC
Vendor:CiscoCisco CW-ACC-N2RPTNC | Antenna adapter 4‑pack: N‑Type ↔ RP‑TNC, 50Ω, Wi‑Fi 2.4/5 GHz, low‑loss fit
Four-piece RF adapter set bridging N‑Type and RP‑TNC interfaces to mate enterprise Wi‑Fi access points, extension leads, and external antennas. Ideal for Catalyst/Meraki deployments using RP‑TNC AP ports with N‑Type patch or sector antennas. 50‑ohm impedance and robust metal bodies ensure reliable RF performance across 2.4 and 5 GHz bands. -
Vendor:Cisco
Cisco CW-ACC-QCKCNCT1 | Cat6A Ethernet extension 0.25 m, 10GBASE‑T, RJ45, low‑profile quick‑connect
CW-ACC-QCKCNCT1
Vendor:CiscoCisco CW-ACC-QCKCNCT1 | Cat6A Ethernet extension 0.25 m, 10GBASE‑T, RJ45, low‑profile quick‑connect
Short Cat6A extension lead designed for tight spaces and quick‑connect wall‑plate AP installations. Supports 10GBASE‑T, PoE/PoE+, and low‑profile routing inside brackets or enclosures where slack management is critical. Length: 25 cm. -
Vendor:Cisco
Cisco CW-ACC-SPACER1-00 | Wall‑plate AP spacer kit: added standoff/clearance for cabling and conduit
CW-ACC-SPACER1-00
Vendor:CiscoCisco CW-ACC-SPACER1-00 | Wall‑plate AP spacer kit: added standoff/clearance for cabling and conduit
Spacer kit that adds standoff behind wall‑plate access points to accommodate cable bend radius, surface irregularities, or conduit within the box. Helps achieve flush, professional mounting on varied wall surfaces. -
Vendor:Cisco
Cisco CW-ANT-T-D3-N | Tri-band directional mini patch | N-type | 6/6/6 dBi (2.4/5/6 GHz) | Wi‑Fi 6/6E ready
CW-ANT-T-D3-N
Vendor:CiscoCisco CW-ANT-T-D3-N | Tri-band directional mini patch | N-type | 6/6/6 dBi (2.4/5/6 GHz) | Wi‑Fi 6/6E ready
Directional mini patch antenna with N-type interface and 6 dBi gain across 2.4/5/6 GHz to focus coverage and improve SNR. A strong choice for corridors, aisles, or point-to-multipoint sectors with Catalyst and Meraki APs that support external antennas. -
Vendor:Cisco
Cisco CW-INJ-8 | 10G RJ45 in + 10G PoE-out, 802.3bt Type 3 60W injector, multigig (100M/1/2.5/5/10G) pass-through, auto 802.3af/at fallback, AC input (power cord not included)
High-power multigig PoE injector that passes up to 10GBASE‑T and delivers up to 60W per IEEE 802.3bt Type 3, with automatic fallback for 802.3af/at devices. Ideal when a PoE switch is unavailable or when upgrading a single AP, camera, or endpoint to 802.3bt power. -
Vendor:Cisco
Cisco CW-MNT-ART3 | Articulating AP mount kit, adjustable multi‑axis tilt/swivel, wall/ceiling capable, indoor
Versatile articulating mounting solution for compatible indoor access points, allowing fine orientation control on walls or ceilings to optimize coverage and reduce glare or obstructions.
Why Choose XS Network Tech?
We are a trusted partner for businesses of all sizes, including government departments, data centres, and service providers. Our expert team in sales, logistics, and customer service ensures that your needs are met with speed and precision, from pre-sales consultation to order fulfilment. With a commitment to fast delivery, sustainability, and a wide inventory, XS Network Tech is your go-to source for IT hardware. Trust us for quality, fast responses, and a hassle-free experience every time.