-
Vendor:HPE
HPE R5Z79A | 200Gb | QSFP56↔QSFP56 DAC | 200GBASE-CR4 | N/A nm | 2.5m | QSFP56
R5Z79A
Stock Status: Enquire
Vendor:HPEHPE R5Z79A | 200Gb | QSFP56↔QSFP56 DAC | 200GBASE-CR4 | N/A nm | 2.5m | QSFP56
200G QSFP56 to QSFP56 passive direct attach copper (DAC) cable designed for short-reach, low-latency links across adjacent racks. Utilizes 4x50G PAM4 lanes to provide full 200G throughput with minimal power draw. Coded for the platform shown in this listing; verify device compatibility before purchase. -
Vendor:HPE
HPE R5Z78A | 200Gb | QSFP56↔QSFP56 DAC | 200GBASE-CR4 | N/A nm | 2m | QSFP56
R5Z78A
Stock Status: Enquire
Vendor:HPEHPE R5Z78A | 200Gb | QSFP56↔QSFP56 DAC | 200GBASE-CR4 | N/A nm | 2m | QSFP56
High-performance 200G QSFP56 to QSFP56 passive direct attach copper (DAC) cable for short-reach, low-latency links between 200G switches, servers, and NICs. Built on 4x50G PAM4 lanes, it delivers reliable 200G connectivity with minimal power and excellent signal integrity for top-of-rack deployments. Coded for the platform shown in this listing; verify device compatibility before purchase. -
Vendor:HPE
HPE R5Z77A | 200G QSFP56 DAC | 200GBASE-CR4 | passive copper | wavelength: n/a | 1m | QSFP56-to-QSFP56
R5Z77A
Stock Status: Enquire
Vendor:HPEHPE R5Z77A | 200G QSFP56 DAC | 200GBASE-CR4 | passive copper | wavelength: n/a | 1m | QSFP56-to-QSFP56
Passive 200G QSFP56 to QSFP56 direct-attach copper cable designed for short-reach, high-bandwidth links between compatible 200GbE ports in the data center. Reliable, low-power alternative to optics for in-rack and adjacent-rack runs. -
Vendor:HPE
HPE R5Z76A | 200G QSFP56 DAC | 200GBASE-CR4 | passive copper | wavelength: n/a | 0.5m | QSFP56-to-QSFP56
R5Z76A
Stock Status: Enquire
Vendor:HPEHPE R5Z76A | 200G QSFP56 DAC | 200GBASE-CR4 | passive copper | wavelength: n/a | 0.5m | QSFP56-to-QSFP56
Passive 200G QSFP56 to QSFP56 direct-attach copper cable for short-run, ultra-low-latency interconnects between compatible 200GbE ports. Ideal for top-of-rack to server or switch-to-switch connections where minimal power and cost are priorities. -
Vendor:HPE
HPE R5Z74A | 32x 200GbE QSFP56 | 12.8Tbps | 1U L2/L3 | uplinks via any port | license: open NOS
R5Z74A
Stock Status: Enquire
Vendor:HPEHPE R5Z74A | 32x 200GbE QSFP56 | 12.8Tbps | 1U L2/L3 | uplinks via any port | license: open NOS
High-density 200GbE spine/leaf data center switch with 32 QSFP56 ports delivering wire-rate throughput and low latency. Open networking design (ONIE) enables choice of NOS for leaf/spine fabrics, HPC, and storage backbones. Redundant hot-swap power and fans support always-on operations. -
Vendor:HPE
HPE QK737A | OM4 MMF LC-LC duplex, 50/125µm, bend-insensitive, 50m, LSZH, aqua
QK737A
Stock Status: Enquire
Vendor:HPEHPE QK737A | OM4 MMF LC-LC duplex, 50/125µm, bend-insensitive, 50m, LSZH, aqua
Enterprise-grade OM4 multimode duplex LC-LC patch cable for reliable short-reach optical connectivity. Bend-insensitive 50/125µm fiber maintains low attenuation through tight bends and dense cable managers. Ideal for connecting LC-based SR optics across racks and rooms at 1/10/25G. -
Vendor:HPE
HPE QK736A | OM4 MMF LC-LC duplex, 50/125µm, bend-insensitive, 30m, LSZH, aqua
QK736A
Stock Status: Enquire
Vendor:HPEHPE QK736A | OM4 MMF LC-LC duplex, 50/125µm, bend-insensitive, 30m, LSZH, aqua
OM4 multimode duplex LC-LC patch cable for high-density short-reach optical links. Bend-insensitive 50/125µm construction preserves signal integrity through tight routes while minimizing insertion loss. Ideal for 1/10/25G SR links between servers, switches, and patch panels. -
Vendor:HPE
HPE QK735A | OM4 MMF LC-LC duplex, 50/125µm, bend-insensitive, 15m, LSZH, aqua
QK735A
Stock Status: Enquire
Vendor:HPEHPE QK735A | OM4 MMF LC-LC duplex, 50/125µm, bend-insensitive, 15m, LSZH, aqua
High-performance OM4 multimode duplex LC-LC patch cable designed for dense fiber runs and short-reach optical links. Engineered with bend-insensitive 50/125µm glass to maintain low loss in tight pathways and high-density racks. Optimized for SR optics on 1/10/25G LC-based links in data center and campus environments. -
Vendor:HPE
HPE QK734A | OM4 MMF Patch Cable | LC/LC Duplex | 5m | 50/125µm | 850nm | 1/10/25G SR
QK734A
Stock Status: Enquire
Vendor:HPEHPE QK734A | OM4 MMF Patch Cable | LC/LC Duplex | 5m | 50/125µm | 850nm | 1/10/25G SR
OM4 multimode duplex LC fiber patch cable for short-reach 1/10/25G SR links across racks or between patch panels. The 5 m length provides extra routing freedom without excess slack. -
Vendor:HPE
HPE QK733A | OM4 MMF Patch Cable | LC/LC Duplex | 2m | 50/125µm | 850nm | 1/10/25G SR
QK733A
Stock Status: Enquire
Vendor:HPEHPE QK733A | OM4 MMF Patch Cable | LC/LC Duplex | 2m | 50/125µm | 850nm | 1/10/25G SR
OM4 multimode duplex LC fiber patch cable for reliable short-reach SR links between switches, servers, and SAN at 1/10/25G. The 2 m length provides flexible routing while maintaining tidy rack layouts. -
Vendor:HPE
HPE QK732A | OM4 MMF Patch Cable | LC/LC Duplex | 1m | 50/125µm | 850nm | 1/10/25G SR
QK732A
Stock Status: Enquire
Vendor:HPEHPE QK732A | OM4 MMF Patch Cable | LC/LC Duplex | 1m | 50/125µm | 850nm | 1/10/25G SR
OM4 multimode duplex LC patch cable for short-reach SR links between switches, servers, and storage at 1/10/25G. Compact 1 m length for tidy rack-to-rack or device-to-panel connections with consistent optical performance. -
Vendor:HPE
HPE QK731A | OM4 MMF Patch Cable | MPO-8 to MPO-8 | 50m | 50/125µm | 850nm | SR4 40/100G-ready
QK731A
Stock Status: Enquire
Vendor:HPEHPE QK731A | OM4 MMF Patch Cable | MPO-8 to MPO-8 | 50m | 50/125µm | 850nm | SR4 40/100G-ready
High-density OM4 multimode 8‑fiber MPO patch cable for short-reach 40/100G SR4 links in data centers, cassettes, and trunk deployments. Engineered for consistent optical performance over a 50 m run with low attenuation for reliable parallel optics. -
Vendor:HPE
HPE QK729A | OM4 MMF | MPO-12 to MPO-12 | 10m | 50/125µm | High‑density trunk
QK729A
Stock Status: Enquire
Vendor:HPEHPE QK729A | OM4 MMF | MPO-12 to MPO-12 | 10m | 50/125µm | High‑density trunk
Factory-terminated OM4 multimode MPO-12 trunk cable for high-density parallel optics and structured cabling, ideal for 40/100G SR4 links and cassette-based breakouts. -
Vendor:HPE
HPE QK724A | 16G Fibre Channel | SFP+ | Short Wave | 850nm | OM3 100m / OM4 125m | LC duplex
QK724A
Stock Status: Enquire
Vendor:HPEHPE QK724A | 16G Fibre Channel | SFP+ | Short Wave | 850nm | OM3 100m / OM4 125m | LC duplex
Short-wave 16G Fibre Channel SFP+ for SAN switches, HBAs, and storage arrays over multimode fiber, ideal for high-throughput, low-latency storage fabrics. -
Vendor:HPE
HPE QK702A | 10GbE | SFP+ to SFP+ Active DAC | 10m | 10GBASE-CU | Twinax | Direct-attach
QK702A
Stock Status: Enquire
Vendor:HPEHPE QK702A | 10GbE | SFP+ to SFP+ Active DAC | 10m | 10GBASE-CU | Twinax | Direct-attach
Active copper SFP+ direct-attach cable for 10GbE interconnects up to 10 meters, ideal for top-of-rack to server or switch links without separate transceivers. -
Vendor:HPE
HPE Q9S72A | 100G QSFP28-to-4x25G SFP28 Breakout DAC 1m, 100GBASE-CR4/25GBASE-CR, passive copper twinax
Q9S72A
Stock Status: Enquire
Vendor:HPEHPE Q9S72A | 100G QSFP28-to-4x25G SFP28 Breakout DAC 1m, 100GBASE-CR4/25GBASE-CR, passive copper twinax
High-density passive copper twinax breakout cable that fans out one 100G QSFP28 port into four 25G SFP28 lanes over 1 meter. Perfect for connecting 100G aggregation ports to 25G server or TOR switch ports with minimal latency and cost.
-
Why buy HPE from XS Network Tech?
We are a trusted HPE supplier for businesses of all sizes, including government departments, enterprise IT teams, and service providers. Our expert sales team supports you from pre-sales consultation through to fast nationwide delivery. We have a wide inventory across current and EOL HPE platforms held locally in Sydney. Every used unit is tested and backed by a 12-month warranty. Quality, fast responses, and no channel delays.
-
Can I buy discontinued HPE servers and switches in Australia?
Yes. We stock discontinued HPE hardware across servers, switches, storage, wireless, and optics. This included models no longer available through HPE's standard channel. If your environment runs on a specific HPE generation and you need to expand or replace without changing platforms, we can source the exact model rather than forcing an upgrade you're not ready for.
-
What HPE products does XS Network Tech stock?
Our HPE range covers ProLiant servers, Aruba switches, storage systems, wireless access points, and fibre optics All stock is held locally in Australia for same-day dispatch. Request a quote to check availability on any current or discontinued HPE model and we'll come back to you within 24 hours. Custom build your own server.