-
Vendor:Meraki
Meraki POE-INJ-3-AU | 802.3af PoE injector | 15.4W PSE | 2x RJ45 GbE pass-through | 48V DC output | 100–240V AC AU plug
Inline 802.3af PoE injector for powering compatible network devices where a PoE switch is not available. Supports gigabit pass-through and auto‑ranging AC input, with an AU mains plug for use in Australia and New Zealand. -
Vendor:Meraki
Meraki MR26-HW | Indoor AP | Wi‑Fi 4 (802.11n) | dual‑band 2.4/5 GHz | 3x3:3 MIMO | 900 Mbps aggregate | 1x 1GbE uplink | 802.3at PoE+
Cloud‑managed indoor access point with 3‑stream 802.11n for higher client capacity in classrooms, retail and office deployments. Delivers advanced RF management, enterprise security and simple cloud configuration at scale. -
Vendor:Meraki
Meraki MR18-HW | Indoor AP | Wi‑Fi 4 (802.11n) | dual‑band 2.4/5 GHz | 2x2:2 MIMO | 600 Mbps aggregate | 1x 1GbE uplink | 802.3af PoE
Cloud‑managed indoor access point delivering dual‑band 802.11n with 2x2 MIMO for small offices, classrooms and retail. Supports enterprise security, traffic shaping and guest access with simple cloud configuration and monitoring. -
Vendor:Meraki
Meraki MR12-HW | Wi‑Fi 4 (802.11n), 2.4 GHz, 300 Mbps, indoor, PoE (802.3af), cloud‑managed
MR12-HW
Vendor:MerakiMeraki MR12-HW | Wi‑Fi 4 (802.11n), 2.4 GHz, 300 Mbps, indoor, PoE (802.3af), cloud‑managed
Indoor, cloud‑managed 802.11n access point for simple, scalable wireless. A single 2x2:2 MIMO radio delivers up to 300 Mbps on 2.4 GHz with integrated omni antennas. Centralized configuration, monitoring, and security policies are managed from the cloud, and PoE simplifies ceiling or wall installation. -
Vendor:Meraki
Cisco MA-MNT-MR-H1A | AP wall-plate mount | for MR30H/MR36H | replacement bracket | low-profile | includes screws
MA-MNT-MR-H1A
Vendor:MerakiCisco MA-MNT-MR-H1A | AP wall-plate mount | for MR30H/MR36H | replacement bracket | low-profile | includes screws
Replacement wall-plate mounting bracket for MR30H and MR36H access points. Perfect for moves, adds, and changes when original hardware is unavailable, maintaining a clean in-room appearance and secure fit. Designed for quick, reliable installation on standard wall plates. Includes mounting screws for rapid deployment. -
Vendor:Meraki
Cisco MA-MNT-MR-18 | AP Mount Kit | Compatible: MR46E | Ceiling/Wall | Indoor | External-antenna model support | Replacement hardware
Replacement mounting kit for MR46E indoor access points (external-antenna model). Provides the correct bracket and hardware for secure wall or ceiling grid installation with clearance for antenna leads. -
Vendor:Meraki
Cisco MA-MNT-MR-17 | AP Mount Kit | Compatible: MR36 | Ceiling/Wall | Indoor | Replacement hardware
MA-MNT-MR-17
Vendor:MerakiCisco MA-MNT-MR-17 | AP Mount Kit | Compatible: MR36 | Ceiling/Wall | Indoor | Replacement hardware
Replacement mounting kit for MR36 indoor access points. Restores factory mounting capability for clean ceiling T-bar or wall installations, including security fasteners and grid clips. -
Vendor:Meraki
Cisco MA-MNT-MR-16 | Outdoor AP Mount Kit | Compatible: MR76/MR86 | Wall/Pole | Weather resistant | Replacement hardware
Replacement outdoor mounting kit for MR76/MR86 access points. Provides the wall and pole hardware needed to securely mount or re-mount outdoor units, with rugged components for weather-exposed deployments. -
Vendor:Meraki
Cisco MA-MNT-MR-14 | AP mounting kit | MR55 compatible | ceiling/wall | replacement brackets + hardware
MA-MNT-MR-14
Vendor:MerakiCisco MA-MNT-MR-14 | AP mounting kit | MR55 compatible | ceiling/wall | replacement brackets + hardware
Replacement mounting kit for the MR55 access point. Restores the complete mounting interface and hardware needed for clean, secure ceiling or wall installations with fast AP swap capability. -
Vendor:Meraki
Cisco MA-INJ-6 | 802.3bt PoE++ Injector | 60W | 10/100/1000/2.5/5G mGig pass-through | 1x PoE out
Multigig, high‑power PoE injector delivering up to 60W over 802.3bt (PoE++) for next‑gen APs, cameras, and IoT. Backward compatible with 802.3af/at devices and supports 10/100/1000/2.5/5GBASE‑T pass‑through. Power cord not included. -
Vendor:Meraki
Cisco MA-INJ-4 | Gigabit PoE+ Injector | 802.3at (30W) | 10/100/1000 | 100–240V AC | No Power Cord
IEEE 802.3at PoE+ injector for powering access points, IP phones, and cameras while maintaining full gigabit throughput. Ideal when a non-PoE switch is in place. This version ships without a power cord. -
Vendor:Meraki
Cisco MA-ANT-3-F6 | Indoor dual-band narrow patch antenna | 6x RP-TNC | 11.2 dBi | for MR46E/MR53E
MA-ANT-3-F6
Vendor:MerakiCisco MA-ANT-3-F6 | Indoor dual-band narrow patch antenna | 6x RP-TNC | 11.2 dBi | for MR46E/MR53E
High-gain, narrow-beam indoor dual-band patch antenna for precise 2.4/5 GHz coverage; six RP-TNC leads support multi-radio MIMO on APs such as MR46E and MR53E. Ideal for directional coverage where maximum focus and minimal interference are required. -
Vendor:Meraki
Cisco MA-ANT-3-F5 | Indoor dual-band narrow patch antenna | 5x RP-TNC | 11.2 dBi | for MR42E
MA-ANT-3-F5
Vendor:MerakiCisco MA-ANT-3-F5 | Indoor dual-band narrow patch antenna | 5x RP-TNC | 11.2 dBi | for MR42E
High-gain narrow-beam indoor patch antenna for precise 2.4/5 GHz coverage; five RP-TNC leads enable multi-radio MIMO on external-antenna APs such as MR42E. Ideal for long corridors, point-to-area links, and defined zones requiring tighter focus. -
Vendor:Meraki
Meraki POE-INJ-4-AU | 802.3at PoE injector, 30W, 10/100/1000 passthrough, AU plug
POE-INJ-4-AU
Vendor:MerakiMeraki POE-INJ-4-AU | 802.3at PoE injector, 30W, 10/100/1000 passthrough, AU plug
Gigabit PoE+ injector providing up to 30W to power access points, phones, or cameras when a PoE-capable switch is not available. AU plug variant for Australia/NZ mains. -
Vendor:Meraki
Meraki MR86-HW | Outdoor AP | Wi‑Fi 6 (802.11ax), dual‑band 2.4/5 GHz, 4x4 MU‑MIMO, IP67 | 2.5G mGig uplink, PoE+ (802.3at) | Cloud-managed
High‑performance Wi‑Fi 6 outdoor access point delivering greater efficiency, capacity, and range for dense or wide‑area deployments. Dual‑band 4x4 MU‑MIMO, multigig uplink, and cloud‑based management simplify rollout and ongoing operations. External antennas enable optimized coverage for stadiums, campuses, and industrial sites. -
Vendor:Meraki
Meraki MR84-HW | Outdoor AP | Wi‑Fi 5 (802.11ac Wave 2), dual‑band 2.4/5 GHz, 4x4 MU‑MIMO, IP67 | 1G PoE+ (802.3at) uplink | Cloud-managed
Rugged, high‑capacity outdoor access point designed for challenging environments. Delivers reliable dual‑band Wi‑Fi 5 with 4x4 MU‑MIMO and powerful cloud management for simple deployment, security, and monitoring at scale. External antennas let you tailor coverage patterns for long‑range or high‑density use cases.
Why Choose XS Network Tech?
We are a trusted partner for businesses of all sizes, including government departments, data centres, and service providers. Our expert team in sales, logistics, and customer service ensures that your needs are met with speed and precision, from pre-sales consultation to order fulfilment. With a commitment to fast delivery, sustainability, and a wide inventory, XS Network Tech is your go-to source for IT hardware. Trust us for quality, fast responses, and a hassle-free experience every time.