-
Vendor:Juniper
Juniper WLA-ANT77555-OUT | Dual-band 2.4/5 GHz directional panel; 3-element; gain: 8 dB (2.4), 10.7 dB (5); H-beamwidth: 75° (2.4), 55° (5); indoor/outdoor
Indoor/outdoor dual-band directional panel antenna for 2.4/5 GHz WLANs. Three-element design delivers focused coverage with 8 dB gain at 2.4 GHz and 10.7 dB at 5 GHz, and 75°/55° horizontal beamwidth respectively—ideal for corridors and point-to-multipoint layouts with compatible access points. -
Vendor:Juniper
Juniper WLA-ANTCBL3MMOUT | 3m RF coax extension cable, N-male to N-male, ULA400 low-loss, outdoor-rated
WLA-ANTCBL3MMOUT
Vendor:JuniperJuniper WLA-ANTCBL3MMOUT | 3m RF coax extension cable, N-male to N-male, ULA400 low-loss, outdoor-rated
Extend outdoor antenna runs with a low-loss 3m ULA400 coax fitted with Type N male connectors on both ends. Ideal for WLA-series outdoor antenna deployments. -
Vendor:Juniper
Juniper WLA-ANTLGTNGOUT | Outdoor antenna lightning arrestor kit, N-female bulkhead 0–6 GHz + 3m N-male/N-male ULA400 + grounding
Complete outdoor antenna lightning arrestor kit featuring a Type N F/F bulkhead (0–6 GHz), 3m low-loss ULA400 N M/M cable, and grounding attachment for robust surge mitigation. Ideal for WLA antenna feedthrough protection and cable runs. -
Vendor:Juniper
Juniper WLA-ANTPROT-OUT | Lightning protector, N-male to N-female, direct-mount, outdoor
WLA-ANTPROT-OUT
Vendor:JuniperJuniper WLA-ANTPROT-OUT | Lightning protector, N-male to N-female, direct-mount, outdoor
Direct-mount RF lightning protector with Type N male to Type N female interfaces for safeguarding outdoor antenna feeds. Designed for quick inline installation at the antenna or entry point. -
Vendor:Juniper
Juniper WLA-ANTXTENDOUT | 12in RF jumper, LMR‑195 (Belden 7806A); N‑female to RP‑SMA plug; extends external antenna interface
WLA-ANTXTENDOUT
Vendor:JuniperJuniper WLA-ANTXTENDOUT | 12in RF jumper, LMR‑195 (Belden 7806A); N‑female to RP‑SMA plug; extends external antenna interface
12-inch Belden 7806A (LMR-195) RF jumper with N-female to RP-SMA plug connectors for extending the WLA522E coaxial interface or bridging radios and antennas that require these connector types with minimal added run length. -
Vendor:Juniper
Juniper WLA-BRKT-ATST | Anti-tamper security screw kit with tool, 100-pack, for WLA532/322/321 access points
WLA-BRKT-ATST
Vendor:JuniperJuniper WLA-BRKT-ATST | Anti-tamper security screw kit with tool, 100-pack, for WLA532/322/321 access points
Security hardware kit with anti-tamper screws and matching proprietary tool to deter unauthorized removal of WLA access points. Supplied as a bulk pack for multi-site or large deployments. -
Vendor:Juniper
Juniper WLA-BRKT-CLNG | Ceiling tile rail adapter | recessed mount | supports 15/16 in & 9/16 in T-bar rails | tool-less install | compatible with WLA Series APs
Recessed ceiling tile rail adapter for clean, secure mounting of WLA Series access points on standard T-bar grids. Supports both 15/16-inch and 9/16-inch rails with tool-less attachment for fast installs. -
Vendor:Juniper
Juniper WLA-BRKT-PLNM | Plenum mount adapter | for WLA532E AP | in-ceiling plenum installation | 1-unit pack
WLA-BRKT-PLNM
Vendor:JuniperJuniper WLA-BRKT-PLNM | Plenum mount adapter | for WLA532E AP | in-ceiling plenum installation | 1-unit pack
Adapter for mounting the WLA532E access point to a bracket inside plenum spaces. Includes one unit for streamlined in-ceiling deployments of WLA532E variants (US/WW/IL). -
Vendor:Juniper
Juniper WLA-BRKT-TRPZADP | Legacy Trapeze mounting bracket adapter | enables WLA AP install on Trapeze-era mounts | simple retrofit
WLA-BRKT-TRPZADP
Vendor:JuniperJuniper WLA-BRKT-TRPZADP | Legacy Trapeze mounting bracket adapter | enables WLA AP install on Trapeze-era mounts | simple retrofit
Adapter that allows WLA Series access points to mount using legacy Trapeze brackets—ideal for refresh projects where retaining existing ceiling hardware reduces time and cost. Package includes one unit. -
Vendor:Juniper
Juniper WLA-BRKT-WALL | Wall-mount adapter | 1.5 in standoff for cable bend radius | clean cable routing | compatible with WLA Series APs
Wall-mount adapter that positions the access point 1.5 inches off the wall to preserve Ethernet cable bend radius and enable neat cable routing. Ideal for tidy, reliable installs in offices and halls. -
Vendor:Juniper
Juniper WLA-XPS9001GOINTL | Gigabit PoE midspan injector, 802.3at (PoE+), 1x data in + 1x PoE out, 100–240V AC, outdoor, intl cord, mount bracket
Outdoor 802.3at‑compliant Gigabit PoE midspan injector for powering compatible network devices over Ethernet. Supports worldwide AC input (100–240V, 50–60Hz), includes international power cord and mounting bracket for clean installs. Not for use in countries that follow North America Safety Standards. -
Vendor:Juniper
Juniper WLA321-WW | Wi‑Fi 4 | single-radio 2.4/5GHz | 2x2 MIMO (2SS) | 1x 1G PoE (802.3af) | internal antennas
Enterprise 802.11a/b/g/n access point with a single selectable 2.4 or 5 GHz radio, 2x2 MIMO, and a single 1G PoE (802.3af) uplink. Includes internal antennas and ceiling mount bracket; not plenum rated. Worldwide domain except US and Israel. -
Vendor:Juniper
Juniper WLA322-WW | Wi‑Fi 4 | dual-radio 2.4+5GHz | 2x2 MIMO (2SS) | 1x 1G PoE (802.3af) | internal antennas
Enterprise 802.11a/b/g/n access point with concurrent dual radios (2.4 GHz and 5 GHz), 2x2 MIMO, and a single 1G PoE (802.3af) uplink. Includes internal antennas and ceiling mount bracket; not plenum rated. Worldwide domain except US and Israel. -
Vendor:Juniper
Juniper WLA522-WW | Wi‑Fi 4 AP, 2x2:2 dual‑radio 2.4/5 GHz, 1x 1GbE uplink, 802.3af PoE, internal antennas, ceiling/wall mount
Dual‑radio 802.11a/b/g/n access point with 2x2 MIMO (2 spatial streams) for reliable 2.4 GHz and 5 GHz coverage. Features a single 10/100/1000BASE‑T uplink powered via 802.3af PoE, integrated internal antennas, and included ceiling/wall mounting bracket. Not rated for plenum use. Intended for worldwide operation except the US and Israel; verify local regulatory compliance. Typically used with Juniper WLA controllers for centralized management. -
Vendor:Juniper
Juniper WLA522E-WW | Wi‑Fi 4 AP, 2x2:2 dual‑radio 2.4/5 GHz, 1x 1GbE uplink, 802.3af PoE, 4x external antenna ports, plenum‑rated, ceiling mount
Plenum‑rated dual‑radio 802.11a/b/g/n access point with 2x2 MIMO (2 spatial streams), designed for air‑handling spaces and suspended ceilings. Provides a single 10/100/1000BASE‑T uplink with 802.3af PoE and four external antenna ports for flexible RF patterns. Ceiling mount bracket included. Intended for worldwide operation except the US and Israel; verify local regulatory compliance. Typically used with Juniper WLA controllers for centralized management. -
Vendor:Juniper
Juniper WLA532-WW | Wi‑Fi 4 (802.11a/b/g/n) dual‑band 2.4/5 GHz, 3x3 MIMO (3SS); 1x 1GbE 802.3af PoE; 6 internal antennas; ceiling mount
Dual-radio enterprise access point delivering 802.11a/b/g/n (Wi‑Fi 4) with 3x3 MIMO on 2.4/5 GHz, six internal antennas, and a single 1GbE 802.3af PoE uplink. Includes ceiling mount bracket; not plenum rated. Worldwide regulatory domain (excludes US and Israel).
Why Choose XS Network Tech?
We are a trusted partner for businesses of all sizes, including government departments, data centres, and service providers. Our expert team in sales, logistics, and customer service ensures that your needs are met with speed and precision, from pre-sales consultation to order fulfilment. With a commitment to fast delivery, sustainability, and a wide inventory, XS Network Tech is your go-to source for IT hardware. Trust us for quality, fast responses, and a hassle-free experience every time.