-
Vendor:HPE
HPE P27092-B21 | DL380 Gen10 Plus NVMe riser | 4x SlimSAS ports (up to 8x U.2 NVMe) | primary position
Primary NVMe SlimSAS riser for HPE ProLiant DL380 Gen10 Plus servers. Provides four SlimSAS connections to enable up to eight front U.2 NVMe SSDs when used with the appropriate NVMe backplane and cabling. Ideal for building high‑performance, low‑latency storage tiers without consuming standard PCIe slots. -
Vendor:HPE
HPE P27091-B21 | DL380 Gen10 Plus | Primary NVMe riser | 3x SlimSAS x8 | enables up to 6x U.2 NVMe (PCIe Gen4)
Primary riser kit featuring three SlimSAS x8 ports to drive up to six U.2 NVMe bays on DL380 Gen10 Plus when paired with compatible NVMe backplanes and cabling. Provides Gen4 PCIe connectivity for balanced lane distribution to dense NVMe configurations. -
Vendor:HPE
HPE P27090-B21 | DL380 Gen10 Plus | Primary NVMe riser | 2x SlimSAS x16 | enables up to 4x U.2 NVMe (PCIe Gen4)
Primary riser assembly with two SlimSAS x16 connectors for powering front NVMe U.2 backplanes on DL380 Gen10 Plus. Combine with the proper NVMe backplane and SlimSAS cabling to enable up to four U.2 NVMe bays at PCIe Gen4 speeds. -
Vendor:HPE
HPE P27089-B21 | DL380 Gen10 Plus | Secondary NVMe riser | 2x SlimSAS x16 | enables up to 4x U.2 NVMe (PCIe Gen4)
Secondary riser assembly providing two high-bandwidth SlimSAS x16 connectors to drive front NVMe U.2 backplanes on DL380 Gen10 Plus. When paired with the appropriate NVMe backplane and cables, it enables up to four U.2 NVMe drives with full PCIe Gen4 throughput. -
Vendor:HPE
HPE P26932-B21 | DL300 Gen10 Plus | 2U 8x SFF front drive cage | NVMe U.2 backplane (PCIe Gen4) | up to 4 NVMe bays via SlimSAS
Front 2U drive cage and NVMe U.2 backplane kit enabling up to eight 2.5-inch bays on DL300 Gen10 Plus platforms, with support for up to four NVMe U.2 bays (depending on cabling/controller) and mixed SAS/SATA where supported. Designed to connect via SlimSAS to the system NVMe riser for full PCIe Gen4 performance per NVMe bay. -
Vendor:HPE
HPE P26931-B21 | 2U 8x SFF front drive cage, Tri-Mode U.3 24G (x4) backplane; NVMe/SAS/SATA
P26931-B21
Vendor:HPEHPE P26931-B21 | 2U 8x SFF front drive cage, Tri-Mode U.3 24G (x4) backplane; NVMe/SAS/SATA
Add eight front-access SFF bays to DL300 Gen10 Plus 2U servers with a 24G U.3 tri‑mode backplane. Enables NVMe U.3, SAS, or SATA hot-plug operation when paired with a compatible tri‑mode controller. Ideal for high‑performance NVMe tiers, flexible mixed media, or hybrid configurations. Complete kit includes backplane and internal cabling for the front bay position. -
Vendor:HPE
HPE P26930-B21 | 2U 8x SFF front drive cage (Bay 1/2), SAS/SATA 12G backplane; hot-swap
P26930-B21
Vendor:HPEHPE P26930-B21 | 2U 8x SFF front drive cage (Bay 1/2), SAS/SATA 12G backplane; hot-swap
Expand DL300 Gen10 Plus 2U servers with eight front-access SFF bays using a 12G SAS/SATA backplane. Installs in the designated Front Bay 1/2 position for high-density storage expansion. Supports SAS 12G and SATA 6G hot-plug drives with a compatible SAS controller. Ideal for volume storage, mixed capacity tiers, or RAID arrays. -
Vendor:HPE
HPE P26925-B21 | 2U 2x SFF drive cage, SAS/SATA 12G backplane, side-by-side; hot-swap
P26925-B21
Vendor:HPEHPE P26925-B21 | 2U 2x SFF drive cage, SAS/SATA 12G backplane, side-by-side; hot-swap
Add two SFF hot-plug bays to DL300 Gen10 Plus 2U servers with a 12G SAS/SATA backplane. Designed for the side‑by‑side position, this kit includes the backplane and required cabling for quick integration. Supports SAS 12G and SATA 6G drives with a compatible SAS controller. Ideal for boot mirror or small capacity expansion. -
Vendor:HPE
HPE P26924-B21 | 2U 2x SFF drive cage, Tri-Mode U.3 24G (x4) backplane, side-by-side; NVMe/SAS/SATA
Add two SFF bays with a 24G U.3 tri‑mode backplane to DL300 Gen10 Plus 2U servers. Supports NVMe U.3, SAS, or SATA hot-plug drives when used with a compatible tri‑mode controller. Installs in the side‑by‑side bay position; includes backplane and required cabling. Ideal for boot mirror or a small high‑performance tier. -
Vendor:HPE
HPE P26923-B21 | DL380 Gen10 Plus | 2x SFF (2.5in) hot-plug bays | SAS/SATA 12Gb/s backplane | front/tertiary stackable drive cage
Stackable 2-bay 2.5in SAS/SATA 12Gb/s drive cage for DL380 Gen10 Plus, enabling incremental front/tertiary bay additions and flexible capacity scaling with hot-plug serviceability. -
Vendor:HPE
HPE P26922-B21 | DL38X Gen10 Plus | 2x SFF U.3 bays | Tri‑Mode 24G (NVMe/SAS/SATA) PCIe Gen4 x4 per-bay | front/tertiary drive cage
Add two U.3 2.5in bays with a Tri-Mode 24G backplane supporting NVMe, SAS, or SATA on DL38X Gen10 Plus servers. Ideal for high-performance tiers, enabling PCIe Gen4 x4 per bay when used with a supported tri‑mode controller. -
Vendor:HPE
HPE P26920-B21 | DL380 Gen10 Plus | 2x SFF (2.5in) SAS/SATA 12Gb/s bays + PCIe x16 Slot 3 primary/secondary riser kit
Combination kit that enables two additional 2.5in hot-plug SAS/SATA bays and provides the PCIe x16 Slot 3 primary/secondary riser assembly for DL380 Gen10 Plus configurations. Ideal for balanced expansion of storage and PCIe I/O in mixed workloads. -
Vendor:HPE
HPE P26919-B21 | DL38X Gen10 Plus | 4x LFF (3.5in) hot-plug bays | SAS/SATA 12Gb/s low-profile midplane/backplane drive cage
Add four 3.5in hot-plug bays to DL38X Gen10 Plus servers with a low-profile midplane/backplane cage supporting 12Gb/s SAS and SATA drives. Ideal for capacity expansion with enterprise HDDs or SSDs when paired with a compatible SAS controller. -
Vendor:HPE
HPE P26487-B21 | ProLiant DL300 Gen10 Plus 1U LFF Easy Install rail kit | slide rails, EIA-310 19in rack, adjustable depth
Easy Install sliding rail kit for select 1U LFF DL300 Gen10 Plus servers. Tool-less snap-in for square-hole racks with hardware support for round/threaded holes. Full-extension slides provide clear service access; compatible with the matching 1U cable management arm (CMA). -
Vendor:HPE
HPE P26485-B21 | ProLiant DL300 Gen10 Plus 1U SFF Easy Install rail kit | slide rails, EIA-310 19in rack, adjustable depth
Easy Install sliding rail kit for select 1U SFF DL300 Gen10 Plus servers. Tool-less snap-in for square-hole racks with hardware support for round/threaded holes. Full-extension slides provide clear service access; compatible with the matching 1U cable management arm (CMA). -
Vendor:HPE
HPE P26479-B21 | ProLiant DL360 Gen10 Plus high-performance CPU heatsink | 1U-optimized, enhanced thermal dissipation, captive-screw mount
High-performance CPU heatsink engineered for DL360 Gen10 Plus 1U servers to maintain optimal thermals with performance processors. Captive-screw retention and guided alignment support fast, reliable service while preserving front-to-back airflow.
Why Choose XS Network Tech?
We are a trusted partner for businesses of all sizes, including government departments, data centres, and service providers. Our expert team in sales, logistics, and customer service ensures that your needs are met with speed and precision, from pre-sales consultation to order fulfilment. With a commitment to fast delivery, sustainability, and a wide inventory, XS Network Tech is your go-to source for IT hardware. Trust us for quality, fast responses, and a hassle-free experience every time.