-
Vendor:HPE
HPE 826703-B21 | DL380 Gen10 SFF | Systems Insight Display | front health/UID panel
826703-B21
Vendor:HPEHPE 826703-B21 | DL380 Gen10 SFF | Systems Insight Display | front health/UID panel
Front-panel Systems Insight Display kit for DL380 Gen10 SFF chassis providing quick at-a-glance system status, UID, and diagnostic indicators. Enhances serviceability by surfacing health and network indicators without opening the server. Includes display module and cabling for supported configurations. -
Vendor:HPE
HPE 826702-B21 | DL380 Gen10 | PCIe 3.0 riser | 1x slot: x16 (tertiary) | NEBS-ready
826702-B21
Vendor:HPEHPE 826702-B21 | DL380 Gen10 | PCIe 3.0 riser | 1x slot: x16 (tertiary) | NEBS-ready
Enable an additional high-bandwidth PCIe device in the DL380 Gen10 with a tertiary x16 riser designed for NEBS-oriented configurations. Ideal for adding a further accelerator, HBA, or high-speed NIC when primary riser slots are populated. May require specific CPU/IO configuration to enable. -
Vendor:HPE
HPE 826701-B21 | DL380 Gen10 | PCIe 3.0 riser | 3x slots: x8/x16/x8 | NEBS-ready
826701-B21
Vendor:HPEHPE 826701-B21 | DL380 Gen10 | PCIe 3.0 riser | 3x slots: x8/x16/x8 | NEBS-ready
Add three additional PCIe expansion slots to a DL380 Gen10 with a NEBS-oriented riser assembly designed for telecom and rugged deployments. The kit provides one x16 and two x8 PCIe Gen3 slots for high-bandwidth adapters such as NICs, HBAs, and accelerators. May require specific CPU/IO configurations to enable all lanes and must be used in supported riser combinations only. -
Vendor:HPE
HPE 826700-B21 | PCIe Gen3 tertiary riser, 1x x16 slot, full-height support, optional CPU2 dependent, DL38X Gen10
Single-slot tertiary riser that adds one PCIe Gen3 x16 interface in the tertiary riser position of DL38X Gen10 servers. Ideal for adding an extra high-bandwidth NIC, HBA, or accelerator. Tertiary riser enablement may require a second CPU—verify in the server QuickSpecs. -
Vendor:HPE
HPE 826694-B21 | PCIe Gen3 riser, 2x x16 slots (x16/x16), full-height support, GPU/NIC-ready, DL38X Gen10
Dual-slot riser providing two PCIe Gen3 x16 interfaces for high-performance adapters in DL38X Gen10 servers. Ideal for GPUs, high-speed NICs, or HBAs/RAID controllers requiring full-bandwidth x16 slots. Some slot enablement may depend on CPU population—consult server QuickSpecs. -
Vendor:HPE
HPE 826691-B21 | 8x SFF 2.5in drive cage/backplane, SAS/SATA-only, 12Gb SAS, hot-swap, Box 1/2 fitment, DL38X Gen10
Standard SFF front-bay cage and SAS/SATA backplane for DL38X Gen10 servers, fitting Box 1 or Box 2 positions. Provides eight hot-swap 2.5in bays for SAS or SATA drives with 12Gb SAS backplane signaling. Requires compatible RAID/HBA and cabling (sold separately). -
Vendor:HPE
HPE 826690-B21 | 8x SFF 2.5in drive cage/backplane, 6x SAS/SATA + 2x NVMe or 8x SAS/SATA, U.2 PCIe, 12Gb SAS, hot-swap, DL38X Gen10
Premium front-bay cage and backplane kit enabling flexible mixed-media storage in DL38X Gen10 servers. Configure as 6x SAS/SATA plus 2x NVMe (U.2) or as 8x SAS/SATA, all hot-swap capable. Requires appropriate RAID/host controllers and cabling (sold separately). -
Vendor:HPE
HPE 826689-B21 | DL38X Gen10 NVMe express bay kit | enables 8x 2.5in U.2 NVMe bays | PCIe Gen3 x4 per drive | hot-plug NVMe
Scale DL38X Gen10 servers with eight dedicated U.2 NVMe 2.5-inch bays for ultra-low latency storage. This express bay enablement leverages PCIe Gen3 x4 per drive, with hot-plug capability when supported by system firmware and riser configuration. -
Vendor:HPE
HPE 826688-B21 | DL38X Gen10 2SFF SAS/SATA riser kit | adds 2x 2.5in bays | 12Gb/s SAS, 6Gb/s SATA | hot-plug enablement
Add two 2.5-inch SAS/SATA hot-plug bays to DL38X Gen10 servers with a purpose-built riser/backplane kit. Ideal for incremental capacity growth using HDDs or SSDs while retaining enterprise hot-swap and LED status indicators. -
Vendor:HPE
HPE 826687-B21 | DL38X Gen10 2SFF premium bay kit | 2x 2.5in NVMe U.2 or SAS/SATA | PCIe Gen3 x4, 12Gb/s SAS | front or rear enablement
Flexible 2-bay premium kit for DL38X Gen10 that enables two 2.5-inch NVMe or SAS/SATA drives. Use as front NVMe enablement or as front/rear SAS/SATA expansion depending on your chassis configuration, with hot-plug serviceability and enterprise indicators. -
Vendor:HPE
HPE 826686-B21 | DL38X Gen10 4LFF SAS/SATA midplane | enables 4x 3.5in hot-plug bays | 12Gb/s SAS, 6Gb/s SATA | for 4LFF drive cage
Enable four additional 3.5-inch hot-plug drive bays in DL38X Gen10 servers with a SAS/SATA midplane designed for enterprise storage expansion. Supports HDD and SSD with 12Gb/s SAS or 6Gb/s SATA when paired with a compatible Smart Array controller. Ideal for front or rear 4LFF cage configurations, providing status LEDs and seamless hot-plug operation. -
Vendor:HPE
HPE 826685-B21 | DL38X Gen10 rear drive kit; 3x LFF (3.5 in) SAS/SATA bays; capacity expansion
Rear 3-bay LFF drive cage kit for DL38X Gen10 servers, adding three additional 3.5-inch SAS/SATA drive positions without consuming front-bay capacity. Ideal for expanding bulk storage, backups, or tiered capacity within the same chassis footprint. Integrates with Smart Array or HBA solutions for flexible configurations. -
Vendor:HPE
HPE 823856-B21 | 12Gb/s SAS/SATA RAID; PCIe 3.0 x8; internal connector (i-c); Gen10
823856-B21
Vendor:HPEHPE 823856-B21 | 12Gb/s SAS/SATA RAID; PCIe 3.0 x8; internal connector (i-c); Gen10
12Gb/s SAS/SATA RAID controller for HPE Gen10 servers, providing hardware acceleration for performance and resiliency in direct-attached storage arrays. PCIe 3.0 x8 host interface delivers ample bandwidth for intensive workloads. Internal connector orientation (i-c) streamlines cabling inside dense rackmount systems. -
Vendor:HPE
HPE 819203-B21 | 8TB SATA 6Gb/s, 3.5in LFF, 7.2K, 512e, Hot-Plug SC
Cost-effective 8TB nearline HDD with SATA 6Gb/s interface for large-capacity server storage. 3.5in LFF, 7.2K RPM, 512e format in a hot-plug Smart Carrier for easy service. Ideal for file servers, backups, and archival workloads. -
Vendor:HPE
HPE 819201-B21 | 8TB SAS 12Gb/s, 3.5in LFF, 7.2K, 512e, Hot-Plug SC
Enterprise 8TB nearline HDD with SAS 12Gb/s interface for scalable, dependable capacity in rack servers and storage arrays. 3.5in LFF, 7.2K RPM, 512e format in a hot-plug Smart Carrier for quick serviceability. Ideal for backups, archives, and business-critical bulk storage. -
Vendor:HPE
HPE 817753-B21 | 2x SFP28 10/25GbE, PCIe 3.0 x8, SR-IOV, RoCEv2, VXLAN/NVGRE offload
817753-B21
Vendor:HPEHPE 817753-B21 | 2x SFP28 10/25GbE, PCIe 3.0 x8, SR-IOV, RoCEv2, VXLAN/NVGRE offload
Dual-port 10/25GbE SFP28 PCIe adapter for high-performance server connectivity. Delivers low-latency throughput with SR-IOV for virtualization density and RoCEv2 for accelerated east–west traffic. Ideal for cloud, HCI, and storage backbones with flexible 10G/25G operation and broad OS/hypervisor support.
Why Choose XS Network Tech?
We are a trusted partner for businesses of all sizes, including government departments, data centres, and service providers. Our expert team in sales, logistics, and customer service ensures that your needs are met with speed and precision, from pre-sales consultation to order fulfilment. With a commitment to fast delivery, sustainability, and a wide inventory, XS Network Tech is your go-to source for IT hardware. Trust us for quality, fast responses, and a hassle-free experience every time.