-
Vendor:Cisco
Cisco HWIC-3G-HSPA | 3G WWAN HWIC | HSDPA/HSUPA (Global) | GSM/UMTS quad-band | up to 7.2/2.0 Mbps | 1x SIM | dual SMA antenna
Add carrier-based 3G cellular WAN to ISR routers for primary or backup connectivity. This HWIC supports GPRS/EDGE/UMTS/HSDPA/HSUPA with global band coverage and integrates with router IOS for secure VPN, QoS, and policy-based failover. External antennas connect via SMA for optimal signal placement. -
Vendor:Cisco
Cisco HWIC-3G-CDMA | 3G WWAN HWIC | CDMA2000 1xRTT & EV-DO Rev A/0 | 800/1900 MHz | up to 3.1/1.8 Mbps | 1x SIM/UICC (where applicable) | SMA antenna
CDMA/EV-DO HWIC that brings 3G cellular WAN to ISR routers for regions and carriers using CDMA2000. Supports 1xRTT and EV-DO Rev 0/Rev A for higher throughput, with external SMA antenna connectivity and IOS-based security and routing for dependable primary or backup WAN links. -
Vendor:Cisco
Cisco HWIC-2T | 2x Serial (Smart Serial) WAN, sync/async up to 8 Mbps/port; PPP/HDLC/Frame Relay; HWIC single-wide
Dual-port serial HWIC for adding flexible WAN connectivity to ISR platforms. Supports synchronous/asynchronous operation and common WAN encapsulations for branch routing. -
Vendor:Cisco
Cisco HWIC-2SHDSL | G.SHDSL 2‑pair, 2/4‑wire, up to 2.3 Mbps per pair, symmetric copper WAN, router HWIC
HWIC-2SHDSL
Vendor:CiscoCisco HWIC-2SHDSL | G.SHDSL 2‑pair, 2/4‑wire, up to 2.3 Mbps per pair, symmetric copper WAN, router HWIC
Deliver business-class symmetric DSL over existing copper with a 2-pair G.SHDSL WAN interface. Operates in 2-wire or 4-wire modes for extended reach or higher aggregate throughput, making it ideal for dedicated point-to-point access and telco handoffs. -
Vendor:Cisco
Cisco HWIC-2SER | 2x Serial (sync/async) | Smart Serial | EIA-232/449/V.35/X.21 via cables | ISR HWIC
Dual-port serial HWIC delivering flexible sync/async connectivity for legacy WAN circuits and industrial links. Smart Serial interfaces adapt to EIA-232/449, V.35, X.21, and EIA-530/530A with the correct cable, enabling PPP/HDLC and other serial encapsulations on ISR routers. -
Vendor:Cisco
Cisco HWIC-2FE | 2x 10/100 Fast Ethernet routed ports; 802.1Q VLAN; Auto-MDI/MDIX; HWIC
HWIC-2FE
Vendor:CiscoCisco HWIC-2FE | 2x 10/100 Fast Ethernet routed ports; 802.1Q VLAN; Auto-MDI/MDIX; HWIC
Adds two routed Fast Ethernet interfaces to expand LAN/WAN edge connectivity on compatible ISR platforms. Ideal for segmenting networks, VLAN trunking, or additional routed links. -
Vendor:Cisco
Cisco HWIC-2CE1T1-PRI | 2x T1/E1 Channelized + ISDN PRI HWIC | RJ-48C | CSU/DSU | T1: 1.544M ESF/SF B8ZS/AMI | E1: 2.048M G.704 HDB3 | NxDS0 (1–24/31)
Dual-port channelized T1/E1 interface for routers, combining ISDN PRI and fractional data on each port. Configure each port independently for T1 or E1, leverage the integrated CSU/DSU for line build-out and clocking, and terminate voice PRI trunks or NxDS0 circuits. Standards-based framing/coding over RJ-48C ensures easy interop with telco and PBX environments. Ideal for multi-trunk voice gateways and branch WAN aggregation. -
Vendor:Cisco
Cisco HWIC-2A-S | 2-port serial WAN HWIC, dual Smart Serial 26-pin, async/sync, multi-protocol via transition cables
Provide two independent serial WAN ports in a single HWIC for branch routers. Each Smart Serial interface supports asynchronous and synchronous operation with protocol flexibility using the appropriate transition cables. -
Vendor:Cisco
Cisco HWIC-1VDSL | 1-port VDSL2 (G.993.2) | profiles 8/12/17a | PTM; ADSL2/2+ fallback | RJ‑11 | ISR HWIC
Single-port DSL HWIC that provides high-speed VDSL2 access with fallback to ADSL2/ADSL2+ for broad DSLAM compatibility. Supports PTM on VDSL2 and ATM on ADSL, enabling flexible deployment in mixed-access environments. -
Vendor:Cisco
Cisco HWIC-1T1-E1 | 1-port T1/E1 CSU/DSU HWIC | RJ-48C | T1 1.544 Mb/s or E1 2.048 Mb/s (NxDS0) | ESF/SF, CRC4 | B8ZS/AMI, HDB3 | PPP/HDLC/Frame Relay | ISR 1800/2800/3800
Single-port, software-selectable T1/E1 HWIC with integrated CSU/DSU for flexible global WAN deployments. Supports full or fractional circuits, standard framing/line coding, and IOS encapsulations with robust diagnostics for rapid fault isolation. -
Vendor:Cisco
Cisco HWIC-1T | 1-port serial WAN HWIC, Smart Serial 26-pin, sync/async, protocols via transition cables (V.35/X.21/EIA-232/449)
Add flexible serial WAN connectivity to ISR platforms with a 1-port Smart Serial interface supporting synchronous and asynchronous operation. Ideal for PPP, HDLC, and Frame Relay over leased-line or CSU/DSU connections using the appropriate DTE/DCE transition cable. -
Vendor:Cisco
Cisco HWIC-1SER | HWIC serial expansion | 1x Smart Serial | Sync/Async V.35/X.21/RS‑232/RS‑449 | Clocking DTE/DCE | For ISR G1/G2
High-Speed WAN Interface Card providing one Smart Serial port for synchronous/asynchronous serial connectivity on compatible ISR platforms. Supports multiple physical interfaces via the appropriate smart-serial cables, enabling legacy WAN, SCADA, and serial backhaul use cases. -
Vendor:Cisco
Cisco HWIC-1GE-SFP | 1-port 1G SFP HWIC | 1000BASE-X SFP slot (SX/LX/ZX; 1G only) | Routed GE with 802.1Q subinterfaces | Fiber LC via SFP | ISR 2800/3800
Add a flexible, SFP-based Gigabit Ethernet routed interface for fiber or copper handoffs on ISR 2800/3800. Ideal for metro-E, data center, or provider uplinks. Supports 802.1Q subinterfaces and IOS routing/QoS features. SFP transceiver sold separately. -
Vendor:Cisco
Cisco HWIC-1FE | 1-port Fast Ethernet HWIC | 10/100 RJ-45 (802.3/802.3u) | Routed L3 port with 802.1Q subinterfaces | Auto-negotiation & Auto MDI/MDIX | ISR 2800/3800 | No license required
Add a dedicated routed Fast Ethernet interface to ISR 2800/3800 routers for WAN backup, DMZ, or segregated services. The 10/100 RJ-45 port supports 802.1Q subinterfaces, QoS, and ACLs (IOS dependent), with auto-negotiation and Auto MDI/MDIX for simple cabling. -
Vendor:Cisco
Cisco HWIC-1DSU-T1 | 1-port T1 CSU/DSU HWIC | RJ-48C | 1.544 Mb/s (NxDS0) | ESF/SF, B8ZS/AMI | PPP/HDLC/Frame Relay | ISR 1800/2800/3800
Provide carrier-grade T1 WAN connectivity with an integrated CSU/DSU, eliminating external CPE. Supports fractional or full T1 with standard framing/line coding options, plus PPP, HDLC, and Frame Relay encapsulations. IOS-driven diagnostics include loopbacks and alarms for rapid troubleshooting. -
Vendor:Cisco
Cisco HWIC-1CE1T1-PRI | 1x T1/E1 Channelized + ISDN PRI HWIC | RJ-48C | CSU/DSU | T1: 1.544M ESF/SF B8ZS/AMI | E1: 2.048M G.704 HDB3 | NxDS0 (1–24/31)
Add carrier-grade T1/E1 connectivity to your router with a single-port channelized interface supporting ISDN PRI and data. Select T1 or E1 per port, use integrated CSU/DSU for line build-out and clocking, and terminate voice PRI trunks or fractional data (NxDS0). Standards-based framing and coding ensure seamless interop with service providers and PBX gear via RJ-48C copper. Ideal for branch voice gateways, PBX PRI handoff, and WAN access over T1/E1.
Why Choose XS Network Tech?
We are a trusted partner for businesses of all sizes, including government departments, data centres, and service providers. Our expert team in sales, logistics, and customer service ensures that your needs are met with speed and precision, from pre-sales consultation to order fulfilment. With a commitment to fast delivery, sustainability, and a wide inventory, XS Network Tech is your go-to source for IT hardware. Trust us for quality, fast responses, and a hassle-free experience every time.