-
Vendor:Meraki
Cisco MA-MNT-MR-17 | AP Mount Kit | Compatible: MR36 | Ceiling/Wall | Indoor | Replacement hardware
MA-MNT-MR-17
Stock Status: Enquire
Vendor:MerakiCisco MA-MNT-MR-17 | AP Mount Kit | Compatible: MR36 | Ceiling/Wall | Indoor | Replacement hardware
Replacement mounting kit for MR36 indoor access points. Restores factory mounting capability for clean ceiling T-bar or wall installations, including security fasteners and grid clips. -
Vendor:Meraki
Cisco MA-MNT-MR-16 | Outdoor AP Mount Kit | Compatible: MR76/MR86 | Wall/Pole | Weather resistant | Replacement hardware
MA-MNT-MR-16
Stock Status: Enquire
Vendor:MerakiCisco MA-MNT-MR-16 | Outdoor AP Mount Kit | Compatible: MR76/MR86 | Wall/Pole | Weather resistant | Replacement hardware
Replacement outdoor mounting kit for MR76/MR86 access points. Provides the wall and pole hardware needed to securely mount or re-mount outdoor units, with rugged components for weather-exposed deployments. -
Vendor:Meraki
Cisco MA-MNT-MR-14 | AP mounting kit | MR55 compatible | ceiling/wall | replacement brackets + hardware
MA-MNT-MR-14
Stock Status: Enquire
Vendor:MerakiCisco MA-MNT-MR-14 | AP mounting kit | MR55 compatible | ceiling/wall | replacement brackets + hardware
Replacement mounting kit for the MR55 access point. Restores the complete mounting interface and hardware needed for clean, secure ceiling or wall installations with fast AP swap capability. -
Vendor:Meraki
Cisco MA-MNT-MID-1 | Mid-mount rack kit | center-mount brackets | 19-inch rack install | compatibility: MS225/MS250 switches | hardware included
MA-MNT-MID-1
Stock Status: Enquire
Vendor:MerakiCisco MA-MNT-MID-1 | Mid-mount rack kit | center-mount brackets | 19-inch rack install | compatibility: MS225/MS250 switches | hardware included
Mid-mount rack bracket kit for centering compatible switches in equipment racks. Ideal for balanced installs and clean cable management; includes brackets and mounting screws. -
Vendor:Meraki
Cisco MA-INJ-6 | 802.3bt PoE++ Injector | 60W | 10/100/1000/2.5/5G mGig pass-through | 1x PoE out
MA-INJ-6
Stock Status: Enquire
Vendor:MerakiCisco MA-INJ-6 | 802.3bt PoE++ Injector | 60W | 10/100/1000/2.5/5G mGig pass-through | 1x PoE out
Multigig, high‑power PoE injector delivering up to 60W over 802.3bt (PoE++) for next‑gen APs, cameras, and IoT. Backward compatible with 802.3af/at devices and supports 10/100/1000/2.5/5GBASE‑T pass‑through. Power cord not included. -
Vendor:Meraki
Cisco MA-INJ-4 | Gigabit PoE+ Injector | 802.3at (30W) | 10/100/1000 | 100–240V AC | No Power Cord
MA-INJ-4
Stock Status: Enquire
Vendor:MerakiCisco MA-INJ-4 | Gigabit PoE+ Injector | 802.3at (30W) | 10/100/1000 | 100–240V AC | No Power Cord
IEEE 802.3at PoE+ injector for powering access points, IP phones, and cameras while maintaining full gigabit throughput. Ideal when a non-PoE switch is in place. This version ships without a power cord. -
Vendor:Meraki
Cisco MA-FAN-16K2 | Back-to-front airflow fan module | 16K RPM | hot-swappable | for MS390 switch
MA-FAN-16K2
Stock Status: Enquire
Vendor:MerakiCisco MA-FAN-16K2 | Back-to-front airflow fan module | 16K RPM | hot-swappable | for MS390 switch
High-performance fan module delivering back-to-front airflow to match specific rack cooling layouts. Hot-swappable and field-replaceable to keep switches online while maintaining the required airflow direction. -
Vendor:Meraki
Cisco MA-CBL-TEMP-ME-1 | Bare-metal temperature probe | fast-response tip | MT sensor compatible
MA-CBL-TEMP-ME-1
Stock Status: Enquire
Vendor:MerakiCisco MA-CBL-TEMP-ME-1 | Bare-metal temperature probe | fast-response tip | MT sensor compatible
Bare-metal temperature probe offering rapid response to temperature changes for process and ambient monitoring. Ideal when immediate detection of fluctuations is required and glycol buffering is not desired. -
Vendor:Meraki
Cisco MA-CBL-TEMP-GL-1 | Glycol-encased temperature probe | buffered readings for cold storage | MT sensor compatible
MA-CBL-TEMP-GL-1
Stock Status: Enquire
Vendor:MerakiCisco MA-CBL-TEMP-GL-1 | Glycol-encased temperature probe | buffered readings for cold storage | MT sensor compatible
Glycol-encased temperature probe designed to provide buffered, stable readings in refrigerators and freezers, minimizing short-term fluctuations from door openings or defrost cycles. Optimized for food safety and cold-chain monitoring with easy, plug-in installation to supported MT sensors. -
Vendor:Meraki
Cisco MA-CBL-SPWR-30CM | Power-Stack Cable | 30 cm | for MS390 power sharing | short jumper for adjacent units
MA-CBL-SPWR-30CM
Stock Status: Enquire
Vendor:MerakiCisco MA-CBL-SPWR-30CM | Power-Stack Cable | 30 cm | for MS390 power sharing | short jumper for adjacent units
Create compact, clean power-stack links between adjacent MS390 switches with a 30 cm power-stacking cable. Ideal for side-by-side units in the same rack U-space, it enables power pooling and redundancy without excess slack. This is a DC power interconnect, not a data stacking or uplink cable. -
Vendor:Meraki
Cisco MA-CBL-SPWR-150CM | Power-Stack Cable | 150 cm (1.5 m) | for MS390 power sharing | rear power-stacking interconnect
MA-CBL-SPWR-150CM
Stock Status: Enquire
Vendor:MerakiCisco MA-CBL-SPWR-150CM | Power-Stack Cable | 150 cm (1.5 m) | for MS390 power sharing | rear power-stacking interconnect
Interconnect MS390 switches for shared power and redundancy with a 150 cm power-stacking cable. Ideal for intra-rack runs, it enables power pooling across the stack, enhancing uptime and resilience during PSU or circuit events. Purpose-built for rear power-stack interfaces, it is not a data stacking cable. -
Vendor:Meraki
MA-CBL-120G-50CM | 120G Switch Stacking Cable | 50CM
MA-CBL-120G-50CM
Stock Status: Enquire
Vendor:MerakiMA-CBL-120G-50CM | 120G Switch Stacking Cable | 50CM
Compact 0.5m data-plane stacking cable for tightly-coupled MS390 switches, delivering a 120 Gbps inter-switch fabric with minimal slack and the lowest possible latency. Ideal for adjacent units in the same rack. -
Vendor:Meraki
Cisco MA-CBL-120G-3M | MS390 120G data-stack cable, 3m passive copper, proprietary stacking interface
MA-CBL-120G-3M
Stock Status: Enquire
Vendor:MerakiCisco MA-CBL-120G-3M | MS390 120G data-stack cable, 3m passive copper, proprietary stacking interface
Extended-reach 3m data-plane stacking cable for building resilient, high-bandwidth 120 Gbps stacks with MS390 switches across racks or within larger enclosures. Maintains low latency while providing flexible routing options. -
Vendor:Meraki
Cisco MA-CBL-120G-1M | MS390 120G data-stack cable, 1m passive copper, proprietary stacking interface
MA-CBL-120G-1M
Stock Status: Enquire
Vendor:MerakiCisco MA-CBL-120G-1M | MS390 120G data-stack cable, 1m passive copper, proprietary stacking interface
Purpose-built 1m data-plane stacking cable enabling a 120 Gbps stack fabric between compatible MS390 switches. Ideal for adjacent rack units where a longer reach than 0.5m is needed while maintaining low latency and high reliability. -
Vendor:Meraki
Cisco MA-ANT-3-F6 | Indoor dual-band narrow patch antenna | 6x RP-TNC | 11.2 dBi | for MR46E/MR53E
MA-ANT-3-F6
Stock Status: Enquire
Vendor:MerakiCisco MA-ANT-3-F6 | Indoor dual-band narrow patch antenna | 6x RP-TNC | 11.2 dBi | for MR46E/MR53E
High-gain, narrow-beam indoor dual-band patch antenna for precise 2.4/5 GHz coverage; six RP-TNC leads support multi-radio MIMO on APs such as MR46E and MR53E. Ideal for directional coverage where maximum focus and minimal interference are required. -
Vendor:Meraki
Cisco MA-ANT-3-F5 | Indoor dual-band narrow patch antenna | 5x RP-TNC | 11.2 dBi | for MR42E
MA-ANT-3-F5
Stock Status: Enquire
Vendor:MerakiCisco MA-ANT-3-F5 | Indoor dual-band narrow patch antenna | 5x RP-TNC | 11.2 dBi | for MR42E
High-gain narrow-beam indoor patch antenna for precise 2.4/5 GHz coverage; five RP-TNC leads enable multi-radio MIMO on external-antenna APs such as MR42E. Ideal for long corridors, point-to-area links, and defined zones requiring tighter focus.
-
Why buy Meraki from XS Network Tech?
As one of Australia's leading independent Meraki distributors, we are trusted by government departments, MSPs, and businesses of all sizes for Meraki procurement that moves fast. Our team advises on hardware, licensing, and deployment from pre-sales through to fulfilment. With local Sydney stock available for same-day dispatch. New and used Meraki hardware, 12-month warranty on every used unit, and no authorised channel lead times.
-
What's the difference between new and used Meraki hardware?
New Meraki hardware and used Meraki hardware are physically identical, same performance, same cloud management via Meraki Dashboard. The difference is price. Used Meraki is simply the more cost-effective way to deploy enterprise-grade cloud networking without compromising on capability. Meraki licences are purchased separately regardless of whether the hardware is new or used, so buying used gives you the same licensing flexibility at a significantly lower hardware cost.
-
What Meraki products does XS Network Tech stock?
Our Meraki range covers MX security appliances, MS switches, MR wireless access points, MG cellular gateways, and MV smart cameras. We also cover the Meraki Catalyst range. We supply end-of-life models, new and used Meraki models. As one of Australia's leading independent Meraki distributors, we hold local stock for same-day dispatch. Request a quote on any current or discontinued Meraki model.