-
Vendor:Meraki
Meraki MA-MNT-ANT-4 | Vertical antenna mounting bracket, downtilt omni compatible, metal, surface-mount
MA-MNT-ANT-4
Vendor:MerakiMeraki MA-MNT-ANT-4 | Vertical antenna mounting bracket, downtilt omni compatible, metal, surface-mount
Vertical mounting bracket tailored for downtilt omni antennas, enabling correct orientation and reliable attachment to flat surfaces. Sturdy metal construction supports consistent alignment for optimal coverage. Suitable for indoor or sheltered outdoor deployments where vertical placement is required. -
Vendor:Meraki
Meraki MA-MNT-ANT-3 | Horizontal antenna mounting bracket, C/D-series omni compatible, steel, silver/white finish, surface-mount
Horizontal mounting bracket designed to secure compatible C and D series omni antennas for optimal alignment on flat surfaces. Steel construction with a clean silver/white finish provides a sturdy, professional install. Ideal for indoor or sheltered outdoor deployments where horizontal orientation is required. -
Vendor:Meraki
Meraki MA-MNT-ANT-2 | Long Mount Arm | For E/F Series Patch Antennas | Extended standoff | Adjustable | Wall/Pole capable
Extended-length mounting arm that increases antenna standoff to clear eaves, gutters, and obstructions when deploying E and F Series patch antennas. Provides added placement flexibility and precise aiming on walls or poles in indoor/outdoor environments. -
Vendor:Meraki
Meraki MA-MNT-ANT-1 | Standard Mount Arm | For E/F Series Patch Antennas | Adjustable tilt | Wall/Pole capable
MA-MNT-ANT-1
Vendor:MerakiMeraki MA-MNT-ANT-1 | Standard Mount Arm | For E/F Series Patch Antennas | Adjustable tilt | Wall/Pole capable
Standard-length mounting arm designed to position and aim E and F Series patch antennas for optimal coverage. Supports common wall or pole deployments and allows precise alignment in indoor or outdoor environments. -
Vendor:Meraki
Meraki MA-KIT-MV-2A | Gen2 Bullet Camera Parts Kit A | Replacement mounting hardware & seals | MV72/MV72X
MA-KIT-MV-2A
Vendor:MerakiMeraki MA-KIT-MV-2A | Gen2 Bullet Camera Parts Kit A | Replacement mounting hardware & seals | MV72/MV72X
Replacement hardware and sealing components for maintaining and servicing Gen2 bullet camera installations. Helps restore mounting integrity and weather sealing; intended for field replacements of worn or lost parts. Camera and main mount are not included. -
Vendor:Meraki
Meraki MA-INJ-5-AU | 802.3at PoE injector, multigig up to 2.5G, 30W, AU plug
MA-INJ-5-AU
In stock
Vendor:MerakiMeraki MA-INJ-5-AU | 802.3at PoE injector, multigig up to 2.5G, 30W, AU plug
Single-port 802.3at (Type 2) PoE injector designed for high-performance access points and edge devices, supporting multigigabit Ethernet up to 2.5G. Provides up to 30 W PoE output and includes an AU plug for region-specific deployment. -
Vendor:Meraki
Meraki MA-INJ-4-AU | Gigabit PoE+ Injector | 802.3at (30W) | 10/100/1000 | 100–240V AC | AU Plug
MA-INJ-4-AU
Vendor:MerakiMeraki MA-INJ-4-AU | Gigabit PoE+ Injector | 802.3at (30W) | 10/100/1000 | 100–240V AC | AU Plug
IEEE 802.3at PoE+ injector with integrated AU plug for powering access points, IP phones, and cameras while maintaining full gigabit throughput. Ideal when a non-PoE switch is in place. -
Vendor:Meraki
Meraki MA-FAN-18K | Front-to-Back Fan Module | 18,000 RPM | Hot-Swappable | F2B Airflow
MA-FAN-18K
Vendor:MerakiMeraki MA-FAN-18K | Front-to-Back Fan Module | 18,000 RPM | Hot-Swappable | F2B Airflow
High-speed front-to-back (F2B) fan module delivering consistent airflow for cooling redundancy in compatible Cisco Meraki MS switches. Hot-swappable design enables rapid replacement without taking the switch offline. -
Vendor:Meraki
Meraki MA-FAN-16K | Front-to-back airflow fan module | 16K RPM | hot-swappable | for MS390 switch
MA-FAN-16K
Vendor:MerakiMeraki MA-FAN-16K | Front-to-back airflow fan module | 16K RPM | hot-swappable | for MS390 switch
High-speed fan module delivering front-to-back airflow for consistent thermal management in dense switching deployments. Field-replaceable and hot-swappable to minimize downtime and maintain airflow direction consistency across the rack. -
Vendor:Meraki
Meraki MA-CBL-TA-3M | 10G SFP+ DAC | 10GBASE-CR | Passive Twinax Copper | 3m | SFP+↔SFP+
MA-CBL-TA-3M
Vendor:MerakiMeraki MA-CBL-TA-3M | 10G SFP+ DAC | 10GBASE-CR | Passive Twinax Copper | 3m | SFP+↔SFP+
Passive 10GbE SFP+ Direct Attach Copper (DAC) cable for short-reach, low-latency links between switches, servers, and security appliances. Integrated SFP+ connectors deliver plug‑and‑play deployment on SFP+ ports that support 10GBASE‑CR/MSA. Ideal for TOR, aggregation, or interconnects where cost and power efficiency matter. Length: 3 meters. -
Vendor:Meraki
Meraki MA-CBL-TA-1M | 10G SFP+ DAC | 10GBASE-CR | Passive Twinax Copper | 1m | SFP+↔SFP+
MA-CBL-TA-1M
Vendor:MerakiMeraki MA-CBL-TA-1M | 10G SFP+ DAC | 10GBASE-CR | Passive Twinax Copper | 1m | SFP+↔SFP+
Passive 10GbE SFP+ Direct Attach Copper (DAC) cable for short-reach, low-latency links between switches, servers, and security appliances. Integrated SFP+ connectors deliver plug‑and‑play deployment on SFP+ ports that support 10GBASE‑CR/MSA. Ideal for TOR, aggregation, or interconnects where cost and power efficiency matter. Length: 1 meter. -
Vendor:Meraki
Meraki MA-CBL-LEAK-2 | Spot Water Leak Detection Adapter | for MT12 sensor | point-sense probe interface | indoor environment monitoring
Enable precise point-based leak monitoring with a spot detection adapter designed for the MT12 water leak sensor. Ideal for targeted areas where rope/cable detection is not practical, it delivers fast notification when moisture is present at a specific location. Simple, plug-in installation to the sensor’s accessory port streamlines deployment in racks, under HVAC units, and near critical fittings. -
Vendor:Meraki
Meraki MA-CBL-LEAK-1 | Water leak sensing rope cable | for MT12 sensor | continuous detection along length | daisy-chainable | indoor use
Rope-style water leak sensing cable designed to pair with an environmental sensor to detect the presence of water anywhere along its length. Ideal for monitoring under raised floors, around racks, along walls or pipes, and near HVAC or plumbing. The cable is reusable after drying and supports extension with additional compatible segments for wider coverage. -
Vendor:Meraki
Meraki MA-CBL-40G-50CM | 40GbE QSFP+ DAC | 40GBASE-CR4 | passive twinax | reach 0.5m | QSFP+ to QSFP+
MA-CBL-40G-50CM
Vendor:MerakiMeraki MA-CBL-40G-50CM | 40GbE QSFP+ DAC | 40GBASE-CR4 | passive twinax | reach 0.5m | QSFP+ to QSFP+
Short-length direct-attach copper cable engineered for high-density 40GbE interconnects within the same rack. The passive 0.5m twinax design minimizes cable slack while delivering zero added latency and simple, hot-swappable deployment for QSFP+ ports. Compliant with IEEE 802.3ba (40GBASE-CR4). -
Vendor:Meraki
Meraki MA-CBL-40G-3M | 40GbE QSFP+ DAC | 40GBASE-CR4 | passive twinax | reach 3m | QSFP+ to QSFP+
MA-CBL-40G-3M
Vendor:MerakiMeraki MA-CBL-40G-3M | 40GbE QSFP+ DAC | 40GBASE-CR4 | passive twinax | reach 3m | QSFP+ to QSFP+
Direct-attach copper cable for standards-based 40GbE interconnects using QSFP+ interfaces. This passive 3-meter twinax assembly enables simple, low-latency connectivity for top-of-rack, spine–leaf, and switch stacking scenarios without the cost or power draw of optics. Fully hot-swappable and IEEE 802.3ba compliant for 40GBASE-CR4 links. -
Vendor:Meraki
Meraki MA-CBL-40G-1M | 40GbE QSFP+ DAC | 40GBASE-CR4 | passive twinax | reach 1m | QSFP+ to QSFP+
MA-CBL-40G-1M
Vendor:MerakiMeraki MA-CBL-40G-1M | 40GbE QSFP+ DAC | 40GBASE-CR4 | passive twinax | reach 1m | QSFP+ to QSFP+
High-performance direct-attach copper (DAC) cable for 40GbE links between devices with QSFP+ ports. This passive twinax assembly delivers ultra-low latency and power-free operation for short interconnects such as top-of-rack to aggregation, switch stacking, or spine–leaf links. Compliant with IEEE 802.3ba (40GBASE-CR4) and hot-swappable for rapid deployment.
-
Why buy Meraki from XS Network Tech?
As one of Australia's leading independent Meraki distributors, we are trusted by government departments, MSPs, and businesses of all sizes for Meraki procurement that moves fast. Our team advises on hardware, licensing, and deployment from pre-sales through to fulfilment. With local Sydney stock available for same-day dispatch. New and used Meraki hardware, 12-month warranty on every used unit, and no authorised channel lead times.
-
What's the difference between new and used Meraki hardware?
New Meraki hardware and used Meraki hardware are physically identical, same performance, same cloud management via Meraki Dashboard. The difference is price. Used Meraki is simply the more cost-effective way to deploy enterprise-grade cloud networking without compromising on capability. Meraki licences are purchased separately regardless of whether the hardware is new or used, so buying used gives you the same licensing flexibility at a significantly lower hardware cost.
-
What Meraki products does XS Network Tech stock?
Our Meraki range covers MX security appliances, MS switches, MR wireless access points, MG cellular gateways, and MV smart cameras. We also cover the Meraki Catalyst range. We supply end-of-life models, new and used Meraki models. As one of Australia's leading independent Meraki distributors, we hold local stock for same-day dispatch. Request a quote on any current or discontinued Meraki model.