-
Vendor:Cisco
Cisco NIM-2MFT-T1/E1 | Cisco NIM-2MFT-T1/E1= Voice network module
2 port Multiflex Trunk Voice/Clear-chann -
Vendor:Cisco
Cisco NIM-2GE-CU-SFP | WAN NIM | 2x 1GbE Dual‑Mode (RJ45/SFP) | Routed Ports for WAN/Metro‑E | SD‑WAN‑ready
NIM-2GE-CU-SFP
Vendor:CiscoCisco NIM-2GE-CU-SFP | WAN NIM | 2x 1GbE Dual‑Mode (RJ45/SFP) | Routed Ports for WAN/Metro‑E | SD‑WAN‑ready
Add two flexible 1GbE WAN ports to your ISR, each configurable as copper (RJ45) or fiber (SFP) for branch uplinks to ISP, Metro‑E, or campus distribution. Ideal for dual‑carrier, failover, and SD‑WAN designs on supported IOS XE platforms. -
Vendor:Cisco
Cisco NIM-2FXSP | Voice NIM | 2x FXS/FXS‑E/DID | Analog Station/DID Gateway | RJ‑11
NIM-2FXSP
Vendor:CiscoCisco NIM-2FXSP | Voice NIM | 2x FXS/FXS‑E/DID | Analog Station/DID Gateway | RJ‑11
Add two FXS/FXS‑E/DID analog ports to your ISR for phones, faxes, modems, paging, or DID services. Delivers caller ID and T.38 fax when paired with router DSP resources. -
Vendor:Cisco
Cisco NIM-2FXS/4FXOP | Voice NIM | 2x FXS/FXS‑E/DID + 4x FXO | Analog PSTN/Station | PVDM4‑ready | RJ‑11
NIM-2FXS/4FXOP
Vendor:CiscoCisco NIM-2FXS/4FXOP | Voice NIM | 2x FXS/FXS‑E/DID + 4x FXO | Analog PSTN/Station | PVDM4‑ready | RJ‑11
Provide branch analog voice with two FXS/FXS‑E/DID and four FXO ports to connect phones, faxes, modems, and PSTN lines. Designed for ISR platforms, leveraging router DSP resources for codecs, conferencing, and T.38. -
Vendor:Cisco
Cisco NIM-2FXS/4FXO | Voice NIM | 2x FXS/FXS‑E/DID + 4x FXO | Analog Trunk/Station Gateway | RJ‑11
NIM-2FXS/4FXO
Vendor:CiscoCisco NIM-2FXS/4FXO | Voice NIM | 2x FXS/FXS‑E/DID + 4x FXO | Analog Trunk/Station Gateway | RJ‑11
Add analog telephony to your ISR branch router with two FXS/FXS‑E/DID and four FXO ports for stations and PSTN trunks. Supports caller ID, modem/fax (T.38), and enterprise voice features when paired with router DSP resources. -
Vendor:Cisco
Cisco NIM-2FXO | 2x FXO analog ports | Universal PSTN | RJ-11 | Caller ID | Voice gateway
NIM-2FXO
Vendor:CiscoCisco NIM-2FXO | 2x FXO analog ports | Universal PSTN | RJ-11 | Caller ID | Voice gateway
Two-port FXO analog voice module for PSTN connectivity, ideal for branch voice fallback, local emergency calling, and legacy analog line integration. Supports caller ID and country-selectable impedance/tones for global deployments. -
Vendor:Cisco
Cisco NIM-2CE1T1-PRI | 2x T1/E1 PRI | Channelized voice/data | 1.544/2.048 Mb/s | RJ-48C | Int. CSU/DSU | ESF/SF, CRC4; B8ZS/AMI, HDB3
Two-port channelized T1/E1 interface module supporting PRI voice and data, with integrated CSU/DSU and comprehensive framing/line coding options. Ideal for PBX trunks, PSTN interconnect, and channelized WAN access with granular DS0 control. -
Vendor:Cisco
Cisco NIM-2BRI-S/T | 2x ISDN BRI (S/T) ports | TE mode | 2B+D per port | Voice/Data gateway
NIM-2BRI-S/T
Vendor:CiscoCisco NIM-2BRI-S/T | 2x ISDN BRI (S/T) ports | TE mode | 2B+D per port | Voice/Data gateway
Two-port ISDN BRI S/T network interface module for TE-mode terminations to NT equipment or service provider NT1s. Delivers 2B+D per port for voice gateway connectivity or data backup. -
Vendor:Cisco
Cisco NIM-2BRI-NT/TE | 2x ISDN BRI (S/T) ports | NT/TE selectable | 2B+D per port | Voice/Data gateway
NIM-2BRI-NT/TE
Vendor:CiscoCisco NIM-2BRI-NT/TE | 2x ISDN BRI (S/T) ports | NT/TE selectable | 2B+D per port | Voice/Data gateway
Two-port ISDN BRI S/T module providing flexible NT or TE operation per port for voice gateway or data backup scenarios. Supports 2B+D per port, making it ideal for small-site PSTN interconnects and resilient WAN dial-backup. -
Vendor:Cisco
Cisco NIM-24A | 24-port async serial NIM, RS-232 via breakout, console/terminal server aggregation, up to 230.4 kbps per port
High-density 24-port asynchronous serial module for large console/terminal aggregation, POS, and telemetry deployments. Provides per-port software-configurable speeds, flow control, and flexible management for out-of-band networks. -
Vendor:Cisco
Cisco NIM-1T | 1x Serial WAN NIM (Smart Serial), multi-protocol V.35/X.21/RS-232/RS-530 via cables, HDLC/PPP/Frame Relay
Single-port Serial WAN module using a Smart Serial interface, enabling multiple serial standards via the appropriate transition cable. Suitable for point-to-point leased lines and legacy WAN interconnects with HDLC, PPP, or Frame Relay encapsulation. -
Vendor:Cisco
Cisco NIM-1MFT-T1/E1 | 1x Multiflex T1/E1 WAN NIM, RJ48C, voice or clear-channel data, Nx64 channelized, PRI/CAS/HDLC/PPP/FR
Single-port Multiflex Trunk module for T1/E1 services supporting voice applications (PRI/CAS) and clear-channel data. Software-selectable T1 or E1 operation with flexible channelization for Nx64 kbps circuits. Ideal for converged branch deployments needing legacy circuit access alongside IP. -
Vendor:Cisco
Cisco NIM-1GE-CU-SFP | 1x GE WAN NIM, dual-mode 10/100/1000 RJ45 or 1G SFP, routed combo port (one active), IEEE 802.3ab/802.3z
Flexible 1-port Gigabit Ethernet WAN Network Interface Module with a combo 10/100/1000 RJ45 copper and 1G SFP fiber slot. Ideal for branch WAN uplinks, giving the choice of copper or fiber without consuming multiple slots. Supports routing features on IOS XE platforms and line-rate 1 Gbps operation. -
Vendor:Cisco
Cisco NIM-1CE1T1-PRI | Cisco 1 port Multiflex Trunk Voice/ Channelized Data T1/E1 Module
NIM-1CE1T1-PRI
Vendor:CiscoCisco NIM-1CE1T1-PRI | Cisco 1 port Multiflex Trunk Voice/ Channelized Data T1/E1 Module
1 port Multiflex Trunk Voice/ Channelized Data T1/E1 Module -
Vendor:Cisco
Cisco NIM-16A | Cisco NIM-16A= network switch module
16 Channel Async serieal interf for ISR4000 series router -
Vendor:Cisco
Cisco NIC-2X10GE-SR | Cisco Cisco SCE10000 2 Port 10G SR NIC
All products sold by XS Network Tech include a 12-month warranty on both new and used items. Our in-house technical team thoroughly tests used hardware prior to sale to ensure enterprise-grade reliability.
-
Why buy Cisco from XS Network Tech?
We are the independent Cisco specialist Australian IT teams, data centres, and government departments rely on for speed and availability. Unlike other resellers, we hold our own stock in Australia. With us you bypass the 4 - 8 week lead times that slow most Cisco procurement down. From pre-sales to fulfilment, our team moves as fast as your project.
-
Can I still buy discontinued Cisco models?
Yes, we supply both current-generation Cisco switches, routers, and modules and end-of-life (EOL) models that other resellers no longer stock. We hold stock for discontinued Catalyst, Nexus, ISR, ASR, and UCS models. Whether you need a like-for-like spare, a cost-effective upgrade, or a legacy model to extend your existing deployment, we can source it.
-
How quickly can I get Cisco hardware in Australia?
Our Cisco range covers switches (Catalyst, Nexus, Industrial), routers (ISR, ASR), wireless (Meraki, Aironet), security appliances, transceivers, servers (UCS), and accessories from new, used, and EOL. All units are stocked in Sydney and available for same-day dispatch Australia-wide. When you need hardware fast, we can actually deliver it.