-
Vendor:Cisco
Cisco ONS-QSFP-4X10-MLR | QSFP+ 40G/4x10G LR4, 1310nm CWDM, 10km, LC duplex
ONS-QSFP-4X10-MLR
Vendor:CiscoCisco ONS-QSFP-4X10-MLR | QSFP+ 40G/4x10G LR4, 1310nm CWDM, 10km, LC duplex
Multi‑rate QSFP+ transceiver supporting 40GbE and 4x10GbE breakout over single‑mode fiber. LR4 optics on 1310nm CWDM lanes provide up to 10 km reach using LC duplex connectivity. Designed for standards‑based interoperability with DOM for insight and hot‑swap serviceability. -
Vendor:Cisco
Cisco ONS-QSFP-4X10-MER | QSFP+ 40G/4x10G ER4, 1310nm CWDM, 40km, LC duplex
ONS-QSFP-4X10-MER
Vendor:CiscoCisco ONS-QSFP-4X10-MER | QSFP+ 40G/4x10G ER4, 1310nm CWDM, 40km, LC duplex
High‑reach multi‑rate QSFP+ transceiver for 40GbE or 4x10GbE breakout over single‑mode fiber. ER4 optics on 1310nm CWDM lanes deliver up to 40 km reach via LC duplex. Digital diagnostics and hot‑swap design streamline operations; host FEC is recommended to realize maximum distance. -
Vendor:Cisco
Cisco ONS-QDD-OLS | QSFP-DD OLS | C-band EDFA (pre + booster) | 2.4 THz optical bandwidth | SMF | LC/UPC
ONS-QDD-OLS
Vendor:CiscoCisco ONS-QDD-OLS | QSFP-DD OLS | C-band EDFA (pre + booster) | 2.4 THz optical bandwidth | SMF | LC/UPC
Ultra-compact QSFP-DD Open Line System module integrating pre-amplifier and booster EDFA stages for C-band DWDM transport. Enables rapid deployment of amplified optical paths directly from a switch/router port without external shelves. Designed for protocol transparency across coherent or DWDM client optics. -
Vendor:Cisco
Cisco ONS-QC-4X32G-LW | 4x32G FC | QSFP+ | FC-PI-6 LW 1310nm | 500 m SMF | MPO-12
ONS-QC-4X32G-LW
Vendor:CiscoCisco ONS-QC-4X32G-LW | 4x32G FC | QSFP+ | FC-PI-6 LW 1310nm | 500 m SMF | MPO-12
Performance 4x32G Fibre Channel longwave QSFP+ for single-mode SAN uplinks and aggregation. Parallel 1310 nm optics provide four independent 32GFC lanes with a 500 m reach, ideal for high-throughput fabric cores. -
Vendor:Cisco
Cisco ONS-QC-16GFC-SW | 4x16G FC | QSFP+ | FC-PI-5 SW 850nm | 100m OM3 / 125m OM4 | MPO-12
ONS-QC-16GFC-SW
Vendor:CiscoCisco ONS-QC-16GFC-SW | 4x16G FC | QSFP+ | FC-PI-5 SW 850nm | 100m OM3 / 125m OM4 | MPO-12
High-density 4x16G Fibre Channel shortwave QSFP+ for multimode data center SAN fabrics. Parallel optics deliver four independent 16GFC lanes for top-of-rack to core aggregation with simple MPO cabling. -
Vendor:Cisco
Cisco ONS-QC-16GFC-LW | 4x16G FC | QSFP+ | FC-PI-5 LW 1310nm | 10km SMF | MPO-12
ONS-QC-16GFC-LW
Vendor:CiscoCisco ONS-QC-16GFC-LW | 4x16G FC | QSFP+ | FC-PI-5 LW 1310nm | 10km SMF | MPO-12
High-density 4x16G Fibre Channel longwave QSFP+ for single-mode deployments. Parallel 4-lane design enables breakout to four 16GFC ports, ideal for SAN aggregation and core uplinks. Digital diagnostics and hot-swap operation simplify operations in mission-critical fabrics. -
Vendor:Cisco
Cisco ONS-MPO24-2MPO12 | 2× MPO‑12 to MPO‑24 SR4↔SR10 CPAK breakout harness, 20m
ONS-MPO24-2MPO12
Vendor:CiscoCisco ONS-MPO24-2MPO12 | 2× MPO‑12 to MPO‑24 SR4↔SR10 CPAK breakout harness, 20m
Purpose‑built MPO harness to interconnect two 12‑fiber MPO SR4 ports with a single 24‑fiber MPO SR10‑capable interface, enabling aggregation into a 100G SR10 path from dual 40G SR4 sources where supported. Includes two MPO‑12 legs and one MPO‑24 trunk for high‑density, parallel‑optics environments. Verify lane mapping, polarity, and compatibility with your SR4/SR10 and CPAK hardware before use. -
Vendor:Cisco
Cisco ONS-MPO16-2X8-5 | MPO‑16 to 2× MPO‑8 breakout fiber cable, 5m
Versatile MPO breakout cable that converts one 16‑fiber MPO trunk to two 8‑fiber MPO legs for orderly parallel‑optics patching across or between racks. Balanced length for flexible routing without excess slack. Verify polarity and pinout prior to installation. -
Vendor:Cisco
Cisco ONS-MPO16-2X8-2 | MPO‑16 to 2× MPO‑8 breakout fiber cable, 2m
Compact MPO breakout harness converting a 16‑fiber MPO trunk to two 8‑fiber MPO legs for short, tidy intra‑rack patching. Ideal where minimal slack and precise routing are required. Verify polarity and pinout before deployment. -
Vendor:Cisco
Cisco ONS-MPO16-2X8-10 | MPO‑16 to 2× MPO‑8 breakout fiber cable, 10m
ONS-MPO16-2X8-10
Vendor:CiscoCisco ONS-MPO16-2X8-10 | MPO‑16 to 2× MPO‑8 breakout fiber cable, 10m
High‑density MPO breakout cable that adapts a 16‑fiber MPO trunk to two 8‑fiber MPO legs for streamlined patching between MPO‑based hardware and panels. Ideal for short to medium intra‑rack runs and aggregation of parallel‑optics lanes. Verify polarity and pinout requirements for your environment before deployment. -
Vendor:Cisco
Cisco ONS-MPO-MPOLC-2 | MPO-24 to 2x MPO-12 + 4x LC hybrid harness | 2 m | 24 fibers total | compact rack-to-panel breakout
Short-length hybrid harness converting one MPO‑24 input to two MPO‑12 plus four LC connectors over 2 m, ideal for tidy rack‑to‑panel breakouts where minimal slack is desired. Enables mixed connectivity from a single 24‑fiber trunk without field splicing. -
Vendor:Cisco
Cisco ONS-MPO-MPOLC-10 | MPO-24 to 2x MPO-12 + 4x LC hybrid harness | 10 m | 24 fibers total | structured cabling breakout
ONS-MPO-MPOLC-10
Vendor:CiscoCisco ONS-MPO-MPOLC-10 | MPO-24 to 2x MPO-12 + 4x LC hybrid harness | 10 m | 24 fibers total | structured cabling breakout
Versatile hybrid harness that converts one MPO‑24 input into two MPO‑12 outputs plus four LC connectors, enabling mixed connectivity from a single 24‑fiber trunk to multiple panel or device types over a convenient 10 m length. Streamlines migrations and mixed-port environments without field termination. -
Vendor:Cisco
Cisco ONS-MPO-16LC-2 | MPO-16 to 16x LC breakout harness | 2 m | 16 fibers (8x LC duplex) | low-loss | high-density fanout
Compact 2 m MPO-16 to 16x LC breakout harness designed to fan out a single high‑density multi‑fiber link into discrete LC connections for switch, patch panel, or transceiver terminations. Ideal for spine‑to‑leaf breakouts, panel consolidation, and rapid turn‑up of multiple ports from one trunk. -
Vendor:Cisco
Cisco ONS-FMPO-SM-90 | Single-mode OS2 MPO trunk | 90 m | MPO/MTP to MPO/MTP | low-loss | data center backbone
ONS-FMPO-SM-90
Vendor:CiscoCisco ONS-FMPO-SM-90 | Single-mode OS2 MPO trunk | 90 m | MPO/MTP to MPO/MTP | low-loss | data center backbone
High-density single-mode MPO trunk for fast plug-and-play fiber backbones and leaf–spine interconnects. Foldable deployment-friendly design simplifies routing and staging while maintaining low insertion loss for reliable links over 90 m. Ideal for structured cabling, cross-connects, and rapid turn-ups in enterprise and data center environments. -
Vendor:Cisco
Cisco ONS-FMPO-SM-80 | MPO to MPO trunk | Single-Mode OS2 | Foldable | 9/125 um | LSZH | 80m
ONS-FMPO-SM-80
Vendor:CiscoCisco ONS-FMPO-SM-80 | MPO to MPO trunk | Single-Mode OS2 | Foldable | 9/125 um | LSZH | 80m
Foldable single-mode MPO trunk cable engineered for high-density fiber deployments. Pre-terminated MPO connectors simplify installation and help maintain low loss across links. OS2 9/125 um bend-insensitive fiber with LSZH jacket for safe, compact routing in racks and conduits. -
Vendor:Cisco
Cisco ONS-FMPO-SM-70 | MPO to MPO trunk | Single-Mode OS2 | Foldable | 9/125 um | LSZH | 70m
ONS-FMPO-SM-70
Vendor:CiscoCisco ONS-FMPO-SM-70 | MPO to MPO trunk | Single-Mode OS2 | Foldable | 9/125 um | LSZH | 70m
Foldable single-mode MPO trunk cable engineered for high-density fiber deployments. Pre-terminated MPO connectors simplify installation and help maintain low loss across links. OS2 9/125 um bend-insensitive fiber with LSZH jacket for safe, compact routing in racks and conduits.
-
Why buy Cisco from XS Network Tech?
We are the independent Cisco specialist Australian IT teams, data centres, and government departments rely on for speed and availability. Unlike other resellers, we hold our own stock in Australia. With us you bypass the 4 - 8 week lead times that slow most Cisco procurement down. From pre-sales to fulfilment, our team moves as fast as your project.
-
Can I still buy discontinued Cisco models?
Yes, we supply both current-generation Cisco switches, routers, and modules and end-of-life (EOL) models that other resellers no longer stock. We hold stock for discontinued Catalyst, Nexus, ISR, ASR, and UCS models. Whether you need a like-for-like spare, a cost-effective upgrade, or a legacy model to extend your existing deployment, we can source it.
-
How quickly can I get Cisco hardware in Australia?
Our Cisco range covers switches (Catalyst, Nexus, Industrial), routers (ISR, ASR), wireless (Meraki, Aironet), security appliances, transceivers, servers (UCS), and accessories from new, used, and EOL. All units are stocked in Sydney and available for same-day dispatch Australia-wide. When you need hardware fast, we can actually deliver it.