-
Vendor:Cisco
Cisco PEM-15A-AC | AC Power Entry Module, 15A, for 950W AC PSU, hot-swap
PEM-15A-AC
Stock Status: Enquire
Vendor:CiscoCisco PEM-15A-AC | AC Power Entry Module, 15A, for 950W AC PSU, hot-swap
AC power entry module (PEM) for Catalyst 6503 that interfaces with the 950W AC power supply, providing protected AC input and distribution. Supports resilient operation and field-replaceable maintenance. -
Vendor:Cisco
Cisco PEM-1500W-DC-03S | DC Power Entry Module | 1500W class | for 7603‑S | dual A/B feed support | hot‑swap
PEM-1500W-DC-03S
Stock Status: Enquire
Vendor:CiscoCisco PEM-1500W-DC-03S | DC Power Entry Module | 1500W class | for 7603‑S | dual A/B feed support | hot‑swap
DC Power Entry Module (PEM) enabling −48 VDC operation on the 7603‑S by providing A/B feed termination and distribution to the DC power supply. Pair with the matching 1500W DC PSU for complete DC power capability. -
Vendor:Cisco
Cisco PCEX-3G-HSPA-G | 3G WWAN Modem | HSPA/UMTS/EDGE/GPRS | Global Bands | Router Wireless Module
PCEX-3G-HSPA-G
Stock Status: Enquire
Vendor:CiscoCisco PCEX-3G-HSPA-G | 3G WWAN Modem | HSPA/UMTS/EDGE/GPRS | Global Bands | Router Wireless Module
Add cellular WAN connectivity to supported routers with a global 3G HSPA/UMTS/EDGE/GPRS modem, enabling primary or backup WWAN links for resilient branch networking. Ideal for locations without reliable wired circuits or for failover. -
Vendor:Cisco
Cisco PA100-EU-CLIP | Interchangeable plug clip | EU (Type C) | for PA100 power adapter | SPA 500/900 Series
PA100-EU-CLIP
Stock Status: Enquire
Vendor:CiscoCisco PA100-EU-CLIP | Interchangeable plug clip | EU (Type C) | for PA100 power adapter | SPA 500/900 Series
European (Type C) interchangeable plug clip for the PA100 power adapter used with SPA 500 and 900 Series IP Phones. Provides EU outlet compatibility for the existing PA100 supply—no tools required. -
Vendor:Cisco
Cisco PA100-AU-CLIP | AU plug clip for SPA500/900 power adapters | Type I (AS/NZS 3112) | Snap-in adapter for PA100 | For AU/NZ outlets
PA100-AU-CLIP
Stock Status: Enquire
Vendor:CiscoCisco PA100-AU-CLIP | AU plug clip for SPA500/900 power adapters | Type I (AS/NZS 3112) | Snap-in adapter for PA100 | For AU/NZ outlets
Australian Type I snap-on AC plug clip for SPA 500 and SPA 900 Series power adapters (PA100). Enables use with AU/NZ outlets; ideal as a regional conversion or replacement piece. -
Vendor:Cisco
Cisco PA100-AU | AC adapter 5 V 2 A, AU/NZ plug (Type I), 100–240 V AC input 50/60 Hz; DC barrel output, center‑positive; VoIP phone/ATA power
PA100-AU
Stock Status: Enquire
Vendor:CiscoCisco PA100-AU | AC adapter 5 V 2 A, AU/NZ plug (Type I), 100–240 V AC input 50/60 Hz; DC barrel output, center‑positive; VoIP phone/ATA power
Regional power supply for VoIP phones/ATAs requiring 5 V DC at up to 2 A, fitted with an AU/NZ Type I mains plug. Universal 100–240 V AC input for use across ANZ power grids; center‑positive DC barrel output for compatible VoIP endpoints. -
Vendor:Cisco
Cisco PA-T3- | 1x T3 Serial | 44.736 Mbps | 75Ω BNC | C-bit/M23 | PPP/HDLC | 7000/7200/7500
PA-T3
Stock Status: Enquire
Vendor:CiscoCisco PA-T3- | 1x T3 Serial | 44.736 Mbps | 75Ω BNC | C-bit/M23 | PPP/HDLC | 7000/7200/7500
Single-port T3 (DS3) serial port adapter delivering clear-channel 44.736 Mbps WAN connectivity for high-speed uplinks and legacy backbone interconnects. Suitable for 7000/7200/7500 platforms. -
Vendor:Cisco
Cisco PA-POS-OC3SMI | 1x POS OC-3/STM-1 | 155 Mbps | SMF 1310 nm IR (~15 km) | SC | SONET/SDH | 7200
PA-POS-OC3SMI
Stock Status: Enquire
Vendor:CiscoCisco PA-POS-OC3SMI | 1x POS OC-3/STM-1 | 155 Mbps | SMF 1310 nm IR (~15 km) | SC | SONET/SDH | 7200
Packet over SONET/SDH OC-3/STM-1 port adapter with integrated single-mode intermediate-reach optics for metro and regional backbone links. Standards-compliant PPP over SONET with selectable CRC and scrambling for robust transport. Optimized for 7200 platforms. -
Vendor:Cisco
Cisco PA-MC-T3 | Channelized DS3 (T3) | 1x DS3 → up to 28x T1 | 44.736 Mbps | 75Ω BNC | C-bit/M23 | 7200/7500
PA-MC-T3
Stock Status: Enquire
Vendor:CiscoCisco PA-MC-T3 | Channelized DS3 (T3) | 1x DS3 → up to 28x T1 | 44.736 Mbps | 75Ω BNC | C-bit/M23 | 7200/7500
Multi-channel DS3 port adapter that concentrates up to 28 T1 circuits onto a single T3, ideal for efficient aggregation with per-channel routing and policy control. Designed for 7200 and 7500 platforms (via VIP). -
Vendor:Cisco
Cisco PA-A6-T3-1 | 1x ATM DS3 (T3) | 44.736 Mbps | 75Ω BNC | UNI 3.1/4.0 | C-bit/M23 | 7200/7301/7500/7600 (via FlexWAN)
PA-A6-T3-1
Stock Status: Enquire
Vendor:CiscoCisco PA-A6-T3-1 | 1x ATM DS3 (T3) | 44.736 Mbps | 75Ω BNC | UNI 3.1/4.0 | C-bit/M23 | 7200/7301/7500/7600 (via FlexWAN)
Enhanced ATM DS3 port adapter delivering carrier-grade 44.736 Mbps connectivity for legacy ATM aggregation and backhaul. Supports AAL5, OAM, and granular QoS per VC. Compatible with 7200/7301 and 7500 (via VIP), and 7600 with FlexWAN. -
Vendor:Cisco
Cisco PA-A3-T3 | ATM DS3 1xT3 44.736 Mbps, 75Ω BNC, AAL5/AAL3-4, up to 4K VCs
PA-A3-T3
Stock Status: Enquire
Vendor:CiscoCisco PA-A3-T3 | ATM DS3 1xT3 44.736 Mbps, 75Ω BNC, AAL5/AAL3-4, up to 4K VCs
High-performance ATM DS3 port adapter providing a single 44.736 Mbps T3 interface for WAN uplinks on 7200/7500 platforms. Supports AAL5/AAL3/4, OAM F4/F5, and QoS features on the host router for carrier-grade ATM deployments. Dual 75Ω BNC connectors per port for Tx/Rx. -
Vendor:Cisco
Cisco PA-A3-OC3SMI | ATM OC-3/STM-1 SMI 155 Mbps, 1310 nm ~15 km, SC, AAL5/AAL3-4, 1x port
PA-A3-OC3SMI
Stock Status: Enquire
Vendor:CiscoCisco PA-A3-OC3SMI | ATM OC-3/STM-1 SMI 155 Mbps, 1310 nm ~15 km, SC, AAL5/AAL3-4, 1x port
Single-port ATM OC-3/STM-1 SMI adapter delivering 155 Mbps optical uplink for 7200/7500 routers. Integrated 1310 nm single-mode optics with intermediate reach for metro and campus backbones; supports AAL5/AAL3/4, OAM F4/F5, and QoS on the host platform. -
Vendor:Cisco
Cisco PA-A2-4T1C-T3ATM | ATM A2: 1x T3 (DS3) ATM UNI + 4x T1 CES, AAL1/AAL5, OAM F4/F5, UNI 3.1/4.0; for 7200/uBR7200
PA-A2-4T1C-T3ATM
Stock Status: Enquire
Vendor:CiscoCisco PA-A2-4T1C-T3ATM | ATM A2: 1x T3 (DS3) ATM UNI + 4x T1 CES, AAL1/AAL5, OAM F4/F5, UNI 3.1/4.0; for 7200/uBR7200
ATM A2 port adapter providing one T3 (DS3) ATM UNI plus four T1 circuit emulation (CES) interfaces for voice/data transport on Cisco 7200 and uBR7200 platforms. Supports AAL1/AAL5, QoS categories, and ATM OAM for carrier environments. -
Vendor:Cisco
Cisco PA-8T-X21 | 8x X.21 sync serial, up to 2.048 Mbps/port, PPP/HDLC/Frame Relay; for 7200/7500
PA-8T-X21
Stock Status: Enquire
Vendor:CiscoCisco PA-8T-X21 | 8x X.21 sync serial, up to 2.048 Mbps/port, PPP/HDLC/Frame Relay; for 7200/7500
High-density 8-port X.21 synchronous serial adapter for Cisco 7200/7500 edge routers, ideal for leased-line and low-speed WAN aggregation. Supports PPP/HDLC/Frame Relay with per-port clocking control. -
Vendor:Cisco
Cisco PA-2T3 | 2x T3/DS3 44.736 Mbps serial, 75Ω BNC, C-bit/M23, clear-channel
PA-2T3
Stock Status: Enquire
Vendor:CiscoCisco PA-2T3 | 2x T3/DS3 44.736 Mbps serial, 75Ω BNC, C-bit/M23, clear-channel
Dual-port T3/DS3 serial adapter providing two clear-channel 44.736 Mbps interfaces for high-speed WAN connectivity on 7200/7500 platforms. Ideal for private DS3 circuits via external CSU/DSU, with support for common DS3 framing and clocking options. -
Vendor:Cisco
Cisco PA-2FE-TX | 2x 10/100Base-TX RJ45, auto-negotiation, full/half duplex, Layer-3 routed
PA-2FE-TX
Stock Status: Enquire
Vendor:CiscoCisco PA-2FE-TX | 2x 10/100Base-TX RJ45, auto-negotiation, full/half duplex, Layer-3 routed
Two-port Fast Ethernet adapter for 7200 series delivering 10/100Base-TX connectivity to routed interfaces. Supports auto-negotiation, full/half duplex, and platform-based features such as subinterfaces and 802.1Q tagging for flexible edge deployments.
-
Why buy Cisco from XS Network Tech?
We are the independent Cisco specialist Australian IT teams, data centres, and government departments rely on for speed and availability. Unlike other resellers, we hold our own stock in Australia. With us you bypass the 4 - 8 week lead times that slow most Cisco procurement down. From pre-sales to fulfilment, our team moves as fast as your project.
-
Can I still buy discontinued Cisco models?
Yes, we supply both current-generation Cisco switches, routers, and modules and end-of-life (EOL) models that other resellers no longer stock. We hold stock for discontinued Catalyst, Nexus, ISR, ASR, and UCS models. Whether you need a like-for-like spare, a cost-effective upgrade, or a legacy model to extend your existing deployment, we can source it.
-
How quickly can I get Cisco hardware in Australia?
Our Cisco range covers switches (Catalyst, Nexus, Industrial), routers (ISR, ASR), wireless (Meraki, Aironet), security appliances, transceivers, servers (UCS), and accessories from new, used, and EOL. All units are stocked in Sydney and available for same-day dispatch Australia-wide. When you need hardware fast, we can actually deliver it.