-
Vendor:Blue Cable Co
J9054D-BCC | Aruba Compatible 100MB Multi-Mode - 2km (100BASE-FX)
J9054D-BCC
In stock
Vendor:Blue Cable CoJ9054D-BCC | Aruba Compatible 100MB Multi-Mode - 2km (100BASE-FX)
The J9054D-BCC is a drop-in compatible replacement for the Aruba J9054D. This SFP transceiver offers plug-and-play compatibility with Aruba switches requiring a 100BASE-FX interface. - 100BASE-FX compliance per IEEE 802.3u ensures full-duplex Fast Ethernet compatibility over multi-mode fibre - SFP form factor, 100Mbps data rate, 1310nm wavelength, duplex LC connector - Reaches up to 2km over multi-mode fibre in full-duplex operation - Digital Diagnostic Monitoring (DDM) support for real-time transceiver health and performance parameters - Standard 0 to 70 degrees C operating temperature range for typical commercial networking environments -
Vendor:Blue Cable Co
J8177D-BCC | Aruba Compatible 1GB Ethernet RJ45 100m (1000BASE-T)
J8177D-BCC
In stock
Vendor:Blue Cable CoJ8177D-BCC | Aruba Compatible 1GB Ethernet RJ45 100m (1000BASE-T)
The J8177D-BCC is a drop-in compatible replacement for the Aruba J8177D. This 1000BASE-T copper SFP transceiver delivers plug-and-play compatibility with Aruba switches and routers, providing gigabit connectivity over standard Cat5e or Cat6 copper cabling. - IEEE 802.3ab 1000BASE-T compliance guarantees interoperability with any gigabit Ethernet port supporting the standard - SFP form factor with RJ-45 connector, 1000 Mbps data rate, up to 100m reach over Cat5e/Cat6 copper cable - SGMII host interface support for 10/100/1000 Mbps auto-negotiation on compatible platforms - Operating temperature range 0 to 70°C suitable for standard commercial networking environments - Hot-swappable design allows installation and removal without powering down the host device -
Vendor:Blue Cable Co
J4860D-BCC | Aruba Compatible 1GB Single-Mode ZR - 70km (1000BASE-ZX)
J4860D-BCC
In stock
Vendor:Blue Cable CoJ4860D-BCC | Aruba Compatible 1GB Single-Mode ZR - 70km (1000BASE-ZX)
The J4860D-BCC is a drop-in compatible replacement for the Aruba J4860D. This SFP transceiver operates plug-and-play in Aruba switches that support the J4860D specification. - IEEE 802.3z compliant 1000BASE-ZX ensures interoperability across standard Gigabit Ethernet platforms - SFP form factor with 1550nm wavelength transmission over single-mode fibre to 70km - Digital diagnostics monitoring (DDM) via SFF-8472 for real-time link visibility - LC duplex connector interface for standard SMF patch cable compatibility - Hot-swappable design supports installation and removal without network downtime - Operates on standard 3.3V power supply with low thermal profile -
Vendor:Blue Cable Co
J4859D-BCC | Aruba Compatible 1GB Single-Mode 10km (1000BASE-LX)
J4859D-BCC
In stock
Vendor:Blue Cable CoJ4859D-BCC | Aruba Compatible 1GB Single-Mode 10km (1000BASE-LX)
The J4859D-BCC is a drop-in compatible replacement for the Aruba J4859D. This transceiver provides plug-and-play compatibility with Aruba switches that support 1G SFP modules, including the 2530, 2920, 2930F, and 3810M series. - 1000BASE-LX/LH compliance guarantees interoperability with standards-based Gigabit Ethernet equipment - SFP form factor with LC duplex connector, 1310nm wavelength, 10km reach over 9/125µm single-mode fibre - Also supports 550m transmission over 50/125µm or 62.5/125µm multi-mode fibre when used with mode conditioning cable - DOM (Digital Optical Monitoring) provides real-time visibility into transmit power, receive power, temperature, voltage, and bias current - Operating temperature range 0°C to 70°C for standard commercial networking environments - Hot-swappable design allows installation and removal without powering down the host system -
Vendor:Blue Cable Co
J4858D-BCC | Aruba Compatible 1GB Multi-Mode 550m (1000BASE-SX)
J4858D-BCC
In stock
Vendor:Blue Cable CoJ4858D-BCC | Aruba Compatible 1GB Multi-Mode 550m (1000BASE-SX)
The J4858D-BCC is a drop-in compatible replacement for the Aruba J4858D. This 1000BASE-SX SFP transceiver provides plug-and-play compatibility with Aruba switches and networking platforms that require 1.25Gbps Gigabit Ethernet connectivity over multi-mode fibre. - IEEE 802.3z 1000BASE-SX compliance guarantees interoperability with any standard Gigabit Ethernet SFP port - SFP form factor, 1.25Gbps data rate, 850nm wavelength, LC duplex connector - Up to 550m reach over 50/125µm OM2 multi-mode fibre, 275m over 62.5/125µm OM1 fibre - Digital optical monitoring (DOM) support via SFF-8472 enables real-time parameter tracking - Hot-swappable design with standard 0 to 70°C operating temperature range - MSA compliant for use across multi-vendor network environments -
Vendor:Blue Cable Co
ITFZTCHXF-BCC | Sophos Compatible 10GB Multi-Mode 300m (10GBASE-SR)
ITFZTCHXF-BCC
In stock
Vendor:Blue Cable CoITFZTCHXF-BCC | Sophos Compatible 10GB Multi-Mode 300m (10GBASE-SR)
The ITFZTCHXF-BCC is a drop-in compatible replacement for the Sophos ITFZTCHXF. This SFP+ transceiver provides plug-and-play compatibility with Sophos network equipment requiring 10GBASE-SR connectivity. - IEEE 802.3ae 10GBASE-SR compliance guarantees interoperability in multi-vendor 10 Gigabit Ethernet environments - SFP+ form factor, 10.3125 Gbps data rate, 850nm wavelength, multi-mode fibre, duplex LC connector - Supports up to 300m over OM3 fibre, 400m over OM4 fibre - DOM (Digital Optical Monitoring) support for real-time parameter monitoring including temperature, voltage, and optical power levels - VCSEL laser transmitter technology with single 3.3V power supply, power dissipation under 1W - Operating temperature range 0 to 70°C, hot-pluggable for live installation and removal -
Vendor:Blue Cable Co
ITFZTCHSX-BCC | Sophos Compatible 1GB Multi-Mode 550m (1000BASE-SX)
ITFZTCHSX-BCC
In stock
Vendor:Blue Cable CoITFZTCHSX-BCC | Sophos Compatible 1GB Multi-Mode 550m (1000BASE-SX)
The ITFZTCHSX-BCC is a drop-in compatible replacement for the Sophos ITFZTCHSX. Plug-and-play compatibility with Sophos UTM, SG, XG, and XGS series firewalls with SFP ports. - IEEE 802.3z 1000BASE-SX compliance guarantees interoperability with all MSA-compliant Gigabit Ethernet platforms - SFP form factor, 1000Mbps data rate, 850nm wavelength, LC duplex connector - Multi-mode fibre: up to 550m over 50/125µm OM2 fibre, 220m over 62.5/125µm OM1 fibre - Digital Optical Monitoring (DOM) support for real-time link parameter visibility - Hot-swappable installation enables port additions without network interruption - VCSEL laser technology optimised for short-reach, cost-effective intra-building links -
Vendor:Blue Cable Co
ITFZTCHLR-BCC | Sophos Compatible 10GB Single-Mode 10km (10GBASE-LR)
ITFZTCHLR-BCC
In stock
Vendor:Blue Cable CoITFZTCHLR-BCC | Sophos Compatible 10GB Single-Mode 10km (10GBASE-LR)
The ITFZTCHLR-BCC is a drop-in compatible replacement for the Sophos ITFZTCHLR. This SFP+ transceiver provides plug-and-play compatibility with Sophos UTM, SG, and XG series appliances equipped with SFP+ ports. - IEEE 802.3ae 10GBASE-LR compliance guarantees interoperability with standards-compliant 10 Gigabit Ethernet equipment - SFP+ form factor, 10 Gbps data rate, 1310nm wavelength, 10km reach over single-mode fibre with duplex LC connector - Digital diagnostics monitoring (DOM) support via SFF-8472 interface for real-time parameter access including transmit power, receive power, temperature, and voltage - Compliant with SFF-8431 and SFF-8432 multi-source agreements ensuring mechanical and electrical compatibility - Operating temperature range of 0 to 70°C for commercial deployment environments - Hot-pluggable design allows installation and removal without system shutdown -
Vendor:Blue Cable Co
GLC-ZX-SM-RGD-BCC | Cisco Compatible 1GB Single-Mode 70km (1000BASE-ZX) Rugged / Industrial
GLC-ZX-SM-RGD-BCC
Vendor:Blue Cable CoGLC-ZX-SM-RGD-BCC | Cisco Compatible 1GB Single-Mode 70km (1000BASE-ZX) Rugged / Industrial
The GLC-ZX-SM-RGD-BCC is a drop-in compatible replacement for the Cisco GLC-ZX-SM-RGD. This industrial-rated transceiver operates in Cisco Gigabit Ethernet SFP ports across a wide range of platforms and delivers plug-and-play compatibility. - 1000BASE-ZX standard compliance guarantees interoperability with IEEE 802.3z Gigabit Ethernet networks and ensures seamless integration into standard single-mode fibre infrastructure - SFP form factor, 1.25 Gbps data rate, 1550 nm wavelength, 70 km maximum reach over single-mode fibre with LC duplex connector - Industrial temperature rating of -40°C to +85°C (case temperature) designed for harsh environments including outdoor, utility, transportation, and industrial automation deployments - Digital Optical Monitoring (DOM) support per SFF-8472 MSA for real-time parameter access including optical power, temperature, bias current, and supply voltage - 21 dB optical link budget; inline optical attenuation required when fibre span loss is less than 8 dB to protect the receiver - Hot-swappable installation minimises network downtime during upgrades or replacements -
Vendor:Blue Cable Co
GLC-ZX-SMD-BCC | Cisco Compatible 1GB Single-Mode ZR - 70km (1000BASE-ZX)
GLC-ZX-SMD-BCC
In stock
Vendor:Blue Cable CoGLC-ZX-SMD-BCC | Cisco Compatible 1GB Single-Mode ZR - 70km (1000BASE-ZX)
The GLC-ZX-SMD-BCC is a drop-in compatible replacement for the Cisco GLC-ZX-SMD. This 1GB SFP transceiver delivers plug-and-play compatibility with Cisco Gigabit Ethernet switches and routers, providing 1000BASE-ZX connectivity over single-mode fibre. - Complies with IEEE 802.3z 1000BASE-ZX and SFP MSA standards, ensuring interoperability with industry-standard Gigabit Ethernet infrastructure - Operates at 1550nm wavelength over duplex single-mode fibre with LC connectors, reaching up to 70km (link span depends on fibre quality, splices, and connectors) - Provides 21 dB optical link budget with hot-swappable SFP form factor for in-service installation and removal - Supports Digital Optical Monitoring (DOM) per SFF-8472 MSA, enabling real-time monitoring of optical power, temperature, laser bias current, and supply voltage - For shorter single-mode spans under 8 dB loss, a 10 dB inline optical attenuator is required at each end to prevent receiver overload - Compatible with 0 to 70 degrees C commercial temperature environments -
Vendor:Blue Cable Co
GLC-TE-BCC | Cisco Compatible 1GB Ethernet RJ45 100m (1000BASE-T)
GLC-TE-BCC
In stock
Vendor:Blue Cable CoGLC-TE-BCC | Cisco Compatible 1GB Ethernet RJ45 100m (1000BASE-T)
The GLC-TE-BCC is a drop-in compatible replacement for the Cisco GLC-TE. This 1000BASE-T copper SFP transceiver provides plug-and-play Gigabit Ethernet connectivity over Category 5 or better copper infrastructure on Cisco switches, routers, and network devices with extended temperature support. - IEEE 802.3ab 1000BASE-T compliance guarantees interoperability with any standards-compliant Gigabit Ethernet port over copper - SFP form factor with RJ-45 connector, delivering 1 Gbps over Category 5/5e/6 UTP cabling up to 100 metres - 10/100/1000 Mbps auto-negotiation and Auto MDI/MDIX automatically configure link parameters without manual intervention - Extended temperature range from -5°C to 85°C (23°F to 185°F) for industrial and outdoor deployment environments - Hot-swappable installation without network downtime or device reboot, enabling live port reconfiguration - Full-duplex and half-duplex operation with four-pair twisted-pair signalling for maximum link utilisation -
Vendor:Blue Cable Co
GLC-SX-MM-RGD-BCC | Cisco Compatible 1GB Multi-Mode 550m (1000BASE-SX) Rugged / Industrial
GLC-SX-MM-RGD-BCC
In stock
Vendor:Blue Cable CoGLC-SX-MM-RGD-BCC | Cisco Compatible 1GB Multi-Mode 550m (1000BASE-SX) Rugged / Industrial
The GLC-SX-MM-RGD-BCC is a drop-in compatible replacement for the Cisco GLC-SX-MM-RGD. Designed for industrial environments, this rugged SFP operates plug-and-play in Cisco switches, routers, and network interface cards with extended operating temperatures from -40 to 85 degrees Celsius. - IEEE 802.3z 1000BASE-SX standard compliance ensures interoperability with legacy and current Gigabit Ethernet infrastructure - SFP form factor, 1.25 Gbps data rate, 850nm VCSEL laser transmitter, duplex LC connector - Multi-mode fibre compatible: up to 550m over 50/125 micron OM2 fibre, up to 220m over 62.5/125 micron FDDI-grade fibre - Digital Optical Monitoring support via SFF-8472 MSA for real-time parameter tracking including optical power, temperature, and laser bias current - Hardened components and extended -40 to 85 degrees Celsius operating temperature range for harsh outdoor and factory environments - Hot-swappable design with single 3.3V power supply and power consumption under 1W -
Vendor:Blue Cable Co
GLC-SX-MMD-BCC | Cisco Compatible 1GB Multi-Mode 550m (1000BASE-SX)
GLC-SX-MMD-BCC
In stock
Vendor:Blue Cable CoGLC-SX-MMD-BCC | Cisco Compatible 1GB Multi-Mode 550m (1000BASE-SX)
The GLC-SX-MMD-BCC is a drop-in compatible replacement for the Cisco GLC-SX-MMD. This hot-swappable SFP transceiver provides plug-and-play 1000BASE-SX connectivity in Cisco Gigabit Ethernet ports. - IEEE 802.3z 1000BASE-SX compliance guarantees interoperability with any standards-compliant Gigabit Ethernet port - SFP form factor, 1.25 Gbps data rate, 850nm wavelength over multimode fibre with duplex LC connector - Supports up to 550m on 50um OM2 fibre and up to 220m on 62.5um OM1 fibre - DOM support per SFF-8472 MSA provides real-time monitoring of optical power, temperature, bias current, and supply voltage - Hot-swappable design for installation and maintenance without network downtime - Commercial operating temperature range: 0 to 70 degrees Celsius -
Vendor:Blue Cable Co
GLC-LH-SMD-BCC | Cisco Compatible 1GB Single-Mode 20km (1000BASE-LX)
GLC-LH-SMD-BCC
In stock
Vendor:Blue Cable CoGLC-LH-SMD-BCC | Cisco Compatible 1GB Single-Mode 20km (1000BASE-LX)
The GLC-LH-SMD-BCC is a drop-in compatible replacement for the Cisco GLC-LH-SMD. This SFP transceiver operates as plug-and-play with Cisco switches and routers that support 1GB SFP connectivity. - IEEE 802.3z 1000BASE-LX/LH standard compliance ensures interoperability with other standards-based Gigabit Ethernet equipment - SFP form factor operating at 1.25Gbps, 1310nm wavelength, duplex LC connector - Up to 10km reach on single-mode fibre (SMF), up to 550m on multimode fibre (OM1/OM2 with mode-conditioning patch cord) - Digital Optical Monitoring (DOM) support per SFF-8472 MSA enables real-time monitoring of transmit/receive power, temperature, voltage, and laser bias current - Hot-swappable design allows installation and removal without powering down network devices - Extended temperature rating (-5°C to 85°C) suitable for enterprise and light industrial environments -
Vendor:Blue Cable Co
GLC-GE-100FX-BCC | Cisco Compatible 100MB Multi-Mode for 1GB Ports - 2km (100BASE-FX)
GLC-GE-100FX-BCC
Vendor:Blue Cable CoGLC-GE-100FX-BCC | Cisco Compatible 100MB Multi-Mode for 1GB Ports - 2km (100BASE-FX)
The GLC-GE-100FX-BCC is a drop-in compatible replacement for the Cisco GLC-GE-100FX. This SFP transceiver provides plug-and-play 100BASE-FX connectivity for Gigabit Ethernet ports on Cisco switches and routers. - IEEE 802.3u compliant, ensuring interoperability with all 100BASE-FX standard interfaces - SFP form factor, 100 Mbps data rate, 1310nm wavelength over multi-mode fibre (50/125 or 62.5/125 micron), up to 2km reach - Duplex LC connector with DOM support for real-time optical power and link diagnostics - Hot-swappable design enables field replacement without network disruption - Commercial temperature range (0 to 70 degrees C) suitable for enterprise and campus deployments - SGMII interface allows 100 Mbps operation in Gigabit SFP slots via byte-repetition encoding -
Vendor:Blue Cable Co
GLC-FE-T-I-BCC | Cisco Compatible 100MB Ethernet RJ45 100m (100BASE-T) Rugged/Industrial
GLC-FE-T-I-BCC
Vendor:Blue Cable CoGLC-FE-T-I-BCC | Cisco Compatible 100MB Ethernet RJ45 100m (100BASE-T) Rugged/Industrial
The GLC-FE-T-I-BCC is a drop-in compatible replacement for the Cisco GLC-FE-T-I. This industrial temperature SFP module operates plug-and-play in Cisco switches and routers with Fast Ethernet SFP ports. - IEEE 802.3u 100BASE-T compliance ensures interoperability with industrywide Fast Ethernet interfaces - SFP form factor, 100 Mbps data rate, Category 5 UTP copper cabling, RJ-45 connector, up to 100m reach - Industrial temperature rating of -40 to 85°C supports deployment in harsh environments - Hot-swappable design allows module replacement without system downtime - 1W typical power consumption per port - Compatible with Cisco Industrial Ethernet switches and routers including 2000 Series, 3000 Series, 4000 Series, and 5000 Series platforms
-
Why choose Blue Cable Co from XS Network Tech?
Blue Cable Co® is our in-house brand. Built on the same commitment to quality, fast responses, and a hassle-free experience that XS Network Tech delivers across every product we sell. Trusted by government departments, data centres, and service providers, our cabling and transceivers ship same business day from Sydney. One supplier for hardware and connectivity, with no minimum orders and expert procurement support from quote to delivery.
-
What makes Blue Cable Co® different from generic cabling brands?
Blue Cable Co® is designed and quality-controlled by XS Network Tech, not a generic reseller import. Every product is built to enterprise spec, tested for compatibility with major networking brands, and stocked locally in Sydney for same-day dispatch. Our range covers transceivers, ethernet and fibre cables, power and console cables, AV cables, DAC cables, cable management, and network tools. Includes A 5-Year Advanced Warranty.
-
Are Blue Cable Co transceivers compatible with Cisco, Arista, and other brands?
Yes. Blue Cable Co® fibre transceivers are coded for compatibility with major networking brands including Cisco, Arista, Aruba, Juniper, HPE, Meraki, NVIDIA Dell, Fortinet, Moxa, Palo Alto, and Sophos. Covering both current and end-of-life (EOL) platforms. If you need a transceiver for a specific switch model, get in touch and we'll confirm fit before you order.
