-
Vendor:Blue Cable Co
PAN-QSFP-AOC-xM-BCC | Palo Alto Compatible QSFP to QSFP Active Optical Cable, 40GB, 40GBASE-AOC | 3 & 10M
PAN-QSFP-AOC-3M-BCC
In stock
Vendor:Blue Cable CoPAN-QSFP-AOC-xM-BCC | Palo Alto Compatible QSFP to QSFP Active Optical Cable, 40GB, 40GBASE-AOC | 3 & 10M
The PAN-QSFP-AOC-xM-BCC is a drop-in compatible replacement for the Palo Alto PAN-QSFP-AOC-3M. This QSFP+ to QSFP+ active optical cable connects plug-and-play to Palo Alto firewalls and network appliances requiring 40Gb connectivity. - Complies with 40GBASE-AOC and QSFP+ MSA standards, guaranteeing interoperability with Palo Alto QSFP+ 40G ports - Four full-duplex 10Gb/s lanes aggregated to 40Gb/s, 850nm wavelength, multi-mode fibre transmission - QSFP+ form factor with hot-pluggable connectors for non-disruptive installation and removal - Available in 3M and 10M lengths to suit rack-level and intra-rack connectivity requirements - Commercial temperature range (0 to 70 degrees C) for standard data centre and network environments - Lower power consumption than copper alternatives while maintaining signal integrity over extended distances -
Vendor:Blue Cable Co
PAN-QSFP-40GBASE-SR4-BCC | Palo Alto Compatible 40GB Multi-Mode 150m (40GBASE-SR4)
PAN-QSFP-40GBASE-SR4-BCC
In stock
Vendor:Blue Cable CoPAN-QSFP-40GBASE-SR4-BCC | Palo Alto Compatible 40GB Multi-Mode 150m (40GBASE-SR4)
The PAN-QSFP-40GBASE-SR4-BCC is a drop-in compatible replacement for the Palo Alto PAN-QSFP-40GBASE-SR4. This transceiver delivers plug-and-play 40GBASE-SR4 connectivity on Palo Alto firewall platforms with QSFP+ ports. - IEEE 802.3ba 40GBASE-SR4 and QSFP+ MSA (SFF-8436) compliance guarantees interoperability with standard 40G SR4 interfaces - QSFP+ form factor with MPO/MTP connector, 850 nm wavelength, up to 100m over OM3 or 150m over OM4 multi-mode fibre - Four independent 10 Gbps transmit and receive channels using VCSEL laser array for aggregate 40 Gbps throughput - Digital Optical Monitoring (DOM) support provides real-time access to temperature, voltage, bias current, and optical power parameters - Hot-swappable design with commercial temperature range (0 to 70 degrees C) for data centre and enterprise deployments - Supports 4x10G breakout mode for connectivity to four 10GBASE-SR interfaces via MPO-to-duplex LC breakout cable -
Vendor:Blue Cable Co
PAN-QSFP-40GBASE-LR4-BCC | Palo Alto Compatible 40GB Single-Mode 10km (40GBASE-LR4)
PAN-QSFP-40GBASE-LR4-BCC
In stock
Vendor:Blue Cable CoPAN-QSFP-40GBASE-LR4-BCC | Palo Alto Compatible 40GB Single-Mode 10km (40GBASE-LR4)
The PAN-QSFP-40GBASE-LR4-BCC is a drop-in compatible replacement for the Palo Alto PAN-QSFP-40GBASE-LR4. This QSFP+ transceiver provides plug-and-play 40 Gigabit Ethernet connectivity on Palo Alto Networks firewall and security platforms with QSFP+ ports. - IEEE 802.3ba 40GBASE-LR4 compliance ensures full interoperability with any standards-compliant 40G interface - QSFP+ form factor, 40Gbps aggregate data rate over four 10Gbps CWDM lanes at 1271nm, 1291nm, 1311nm, and 1331nm - Reaches up to 10km over OS2 single-mode fiber using duplex LC connectors - Digital Optical Monitoring (DOM) support via I2C interface provides real-time access to temperature, voltage, transmit and receive power - Hot-swappable design allows field installation without interrupting network operation - Compliant with QSFP+ MSA (SFF-8436) and OTU3 standards for multi-protocol versatility -
Vendor:Blue Cable Co
PAN-QSFP-40GBASE-ER4-BCC | Palo Alto Compatible 40GB Single-Mode ER4 Transceiver - 40km (40GBASE-ER4)
PAN-QSFP-40GBASE-ER4-BCC
Vendor:Blue Cable CoPAN-QSFP-40GBASE-ER4-BCC | Palo Alto Compatible 40GB Single-Mode ER4 Transceiver - 40km (40GBASE-ER4)
The PAN-QSFP-40GBASE-ER4-BCC is a drop-in compatible replacement for the Palo Alto PAN-QSFP-40GBASE-ER4. This QSFP+ transceiver provides plug-and-play compatibility with Palo Alto Networks firewall platforms equipped with QSFP+ ports, delivering 40 Gigabit Ethernet connectivity over extended distances. - IEEE 802.3ba 40GBASE-ER4 compliance guarantees interoperability with standards-compliant 40G infrastructure - QSFP+ form factor with four 10Gbps CWDM lanes at 1271, 1291, 1311, and 1331 nm wavelengths multiplexed over duplex LC single-mode fiber - 40km maximum reach over OS2 single-mode fiber with 19 dB link budget, using DFB laser transmitters and APD photodiode receivers - Digital diagnostic monitoring (DOM) support provides real-time access to per-channel optical power, temperature, bias current, and supply voltage via I2C interface per QSFP+ MSA - Hot-swappable operation with single 3.3V power supply in commercial temperature range (0 to 70 degrees C) - OTU3 and STM-256 protocol support for optical transport and SONET/SDH applications beyond Ethernet -
Vendor:Blue Cable Co
PAN-QSFP-40GBASE-BIDI-BCC | Palo Alto Compatible 40GB Multi-Mode BiDi - 100m (40GBASE-SR-BD)
PAN-QSFP-40GBASE-BIDI-BCC
In stock
Vendor:Blue Cable CoPAN-QSFP-40GBASE-BIDI-BCC | Palo Alto Compatible 40GB Multi-Mode BiDi - 100m (40GBASE-SR-BD)
The PAN-QSFP-40GBASE-BIDI-BCC is a drop-in compatible replacement for the Palo Alto PAN-QSFP-40GBASE-BIDI. This QSFP+ transceiver delivers plug-and-play 40 Gigabit Ethernet connectivity over duplex multi-mode fiber using standard LC connectors, enabling reuse of existing 10G duplex fiber infrastructure. - Compliant with IEEE 802.3ba 40GBASE-SR-BD and QSFP+ MSA SFF-8436, ensuring interoperability with standards-based 40GbE interfaces - Operates at 832-918nm wavelength range with bidirectional transmission over two 20G channels on duplex LC fiber - Reaches 100m on OM3 multi-mode fiber and 150m on OM4 multi-mode fiber - Digital optical monitoring (DOM) support provides real-time access to operational parameters including temperature, voltage, and optical power levels - Hot-swappable QSFP+ form factor with commercial temperature range (0 to 70 degrees Celsius) for standard data center environments - Enables cost-effective migration from 10G to 40G by reusing existing duplex fiber infrastructure without requiring MPO parallel fiber -
Vendor:Blue Cable Co
PAN-QSFP28-DAC-xM-BCC | Palo Alto Compatible QSFP to QSFP Copper Direct-Attach 100GBASE-CR4 Cable | 1 to 5M
PAN-QSFP28-DAC-1M-BCC
In stock
Vendor:Blue Cable CoPAN-QSFP28-DAC-xM-BCC | Palo Alto Compatible QSFP to QSFP Copper Direct-Attach 100GBASE-CR4 Cable | 1 to 5M
The PAN-QSFP28-DAC-xM-BCC is a drop-in compatible replacement for the Palo Alto PAN-QSFP28-DAC-1M. This passive twinax cable provides plug-and-play compatibility with Palo Alto Next-Generation Firewalls equipped with 100G QSFP28 ports. - IEEE 802.3bj 100GBASE-CR4 compliance ensures reliable 100 Gigabit Ethernet connectivity in short-reach data center and firewall interconnects - QSFP28 form factor with 4 independent full-duplex copper lanes, each operating at 25.78 Gbps - Passive copper twinax construction delivers cost-effective, low-power connectivity for very short distances - Compliant with SFF-8665 and SFF-8679 MSA standards for mechanical and electrical interoperability - Available in 1M, 3M, and 5M lengths to suit rack-to-rack and intra-rack firewall deployments - Operating temperature range of 0 to 70 degrees Celsius for standard data center environments -
Vendor:Blue Cable Co
PAN-QSFP28-AOC-10M-BCC | Palo Alto Compatible QSFP to QSFP Active Optical Cable, 100GBASE-AOC | 10M
PAN-QSFP28-AOC-10M-BCC
Vendor:Blue Cable CoPAN-QSFP28-AOC-10M-BCC | Palo Alto Compatible QSFP to QSFP Active Optical Cable, 100GBASE-AOC | 10M
The PAN-QSFP28-AOC-10M-BCC is a drop-in compatible replacement for the Palo Alto PAN-QSFP28-AOC-10M. This 100G active optical cable delivers plug-and-play compatibility with Palo Alto Networks equipment that supports 100GBASE QSFP28 AOC interfaces. - QSFP28 MSA compliance ensures interoperability with standards-based 100G Ethernet equipment and InfiniBand EDR applications - Four-channel full-duplex architecture with 25Gb/s per lane, aggregate 100Gb/s data rate over multi-mode fibre - 850nm VCSEL optical transmission at 10 metre fixed length using OM3/OM4 multi-mode fibre internally - Low power consumption under 3.5W per cable end, operating temperature range 0 to 70 degrees Celsius - Hot-swappable QSFP28 connectors at both ends with integrated digital diagnostic monitoring capability -
Vendor:Blue Cable Co
PAN-QSFP28-100GBASE-SR4-BCC | Palo Alto Compatible 100GB Multi-Mode 100m (100GBASE-SR4)
PAN-QSFP28-100GBASE-SR4-BCC
In stock
Vendor:Blue Cable CoPAN-QSFP28-100GBASE-SR4-BCC | Palo Alto Compatible 100GB Multi-Mode 100m (100GBASE-SR4)
The Blue Cable Co PAN-QSFP28-100GBASE-SR4-BCC is Palo Alto compatible, featuring an MPO-12 connector, multi-mode fibre, QSFP form factor, and a max distance of 100m. -
Vendor:Blue Cable Co
PAN-QSFP28-100GBASE-LR4-BCC | Palo Alto Compatible 100GB Single-Mode 10km (100GBASE-LR4)
PAN-QSFP28-100GBASE-LR4-BCC
In stock
Vendor:Blue Cable CoPAN-QSFP28-100GBASE-LR4-BCC | Palo Alto Compatible 100GB Single-Mode 10km (100GBASE-LR4)
The PAN-QSFP28-100GBASE-LR4-BCC by Blue Cable Co is Palo Alto compatible, featuring LC connectors, multi-mode fibre, and a QSFP form factor, supporting up to 10km. -
Vendor:Blue Cable Co
MA-SFP-1GB-TX-BCC | Meraki Compatible 1GB Ethernet RJ45 100m (1000BASE-T)
MA-SFP-1GB-TX-BCC
In stock
Vendor:Blue Cable CoMA-SFP-1GB-TX-BCC | Meraki Compatible 1GB Ethernet RJ45 100m (1000BASE-T)
Enhance your Meraki setup with the Blue Cable Co® SFP, featuring an RJ45 connector, multi-mode fiber, and 100m range for seamless 1GB Ethernet connectivity. -
Vendor:Blue Cable Co
MA-SFP-1GB-SX-BCC | Meraki Compatible 1GB Multi-Mode 550m (1000BASE-SX)
MA-SFP-1GB-SX-BCC
In stock
Vendor:Blue Cable CoMA-SFP-1GB-SX-BCC | Meraki Compatible 1GB Multi-Mode 550m (1000BASE-SX)
Upgrade your network with the MA-SFP-1GB-SX-BCC! This Meraki-compatible SFP supports 1GB over multi-mode fiber with LC connectors, reaching up to 550m. -
Vendor:Blue Cable Co
MA-SFP-1GB-LX10-BCC | Meraki Compatible 1GB Single-Mode 10km (1000BASE-LX)
MA-SFP-1GB-LX10-BCC
In stock
Vendor:Blue Cable CoMA-SFP-1GB-LX10-BCC | Meraki Compatible 1GB Single-Mode 10km (1000BASE-LX)
The Meraki Compatible MA-SFP-1GB-LX10-BCC by Blue Cable Co® features an LC connector, SFP form factor, multi-mode fibre, and supports up to 10km. -
Vendor:Blue Cable Co
MA-SFP-10GB-ZR-BCC | Meraki Compatible 10GB Single-Mode ZR - 80km (10GBASE-ZR)
MA-SFP-10GB-ZR-BCC
In stock
Vendor:Blue Cable CoMA-SFP-10GB-ZR-BCC | Meraki Compatible 10GB Single-Mode ZR - 80km (10GBASE-ZR)
Experience seamless connectivity with Blue Cable Co's Meraki-compatible 10GB SFP+ transceiver. Featuring LC connectors, single-mode fibre, and an impressive 80km max distance. -
Vendor:Blue Cable Co
MA-SFP-10GB-SR-BCC | Meraki Compatible 10GB Multi-Mode 300m (10GBASE-SR)
MA-SFP-10GB-SR-BCC
In stock
Vendor:Blue Cable CoMA-SFP-10GB-SR-BCC | Meraki Compatible 10GB Multi-Mode 300m (10GBASE-SR)
Enhance your Meraki network with the Blue Cable Co® 10GBASE-SR SFP+: LC connector, multi-mode fiber, for up to 400m. Backed by a 5-year warranty. -
Vendor:Blue Cable Co
MA-SFP-10GB-LRM-BCC | Meraki Compatible 10GB Multi-Mode LRM - 220m (10GBASE-LRM)
MA-SFP-10GB-LRM-BCC
In stock
Vendor:Blue Cable CoMA-SFP-10GB-LRM-BCC | Meraki Compatible 10GB Multi-Mode LRM - 220m (10GBASE-LRM)
Experience seamless connectivity with the Blue Cable Co® Meraki Compatible 10GB SFP+ module. Featuring LC connectors, multi-mode fibre, and a range of up to 300m. -
Vendor:Blue Cable Co
MA-SFP-10GB-LR-BCC | Meraki Compatible 10GB Single-Mode 10km (10GBASE-LR)
MA-SFP-10GB-LR-BCC
In stock
Vendor:Blue Cable CoMA-SFP-10GB-LR-BCC | Meraki Compatible 10GB Single-Mode 10km (10GBASE-LR)
The Meraki-compatible Blue Cable Co® SFP+ transceiver features LC connectors, multi-mode fiber, and supports distances up to 10km with 10GBASE-LR.
-
Why choose Blue Cable Co from XS Network Tech?
Blue Cable Co® is our in-house brand. Built on the same commitment to quality, fast responses, and a hassle-free experience that XS Network Tech delivers across every product we sell. Trusted by government departments, data centres, and service providers, our cabling and transceivers ship same business day from Sydney. One supplier for hardware and connectivity, with no minimum orders and expert procurement support from quote to delivery.
-
What makes Blue Cable Co® different from generic cabling brands?
Blue Cable Co® is designed and quality-controlled by XS Network Tech, not a generic reseller import. Every product is built to enterprise spec, tested for compatibility with major networking brands, and stocked locally in Sydney for same-day dispatch. Our range covers transceivers, ethernet and fibre cables, power and console cables, AV cables, DAC cables, cable management, and network tools. Includes A 5-Year Advanced Warranty.
-
Are Blue Cable Co transceivers compatible with Cisco, Arista, and other brands?
Yes. Blue Cable Co® fibre transceivers are coded for compatibility with major networking brands including Cisco, Arista, Aruba, Juniper, HPE, Meraki, NVIDIA Dell, Fortinet, Moxa, Palo Alto, and Sophos. Covering both current and end-of-life (EOL) platforms. If you need a transceiver for a specific switch model, get in touch and we'll confirm fit before you order.
