What is the primary function of the Cisco WS-X6148-45AF Catalyst 6500 Series 48 Port PoE Line Card?
The primary function of the Cisco WS-X6148-45AF Catalyst 6500 Series 48 Port PoE Line Card is to provide 48 ports of Power over Ethernet (PoE) connectivity for devices such as IP phones, wireless access points, and other PoE-enabled devices. It is designed to expand the networking capabilities and capacity of the Cisco Catalyst 6500 Series switches.
What type of devices can be powered using the PoE capability of this line card?
Devices that can be powered using the PoE capability of this line card include IP phones, wireless access points, and any other devices that support PoE standards.
What are the supported PoE standards by the Cisco WS-X6148-45AF Line Card?
The Cisco WS-X6148-45AF Line Card supports IEEE 802.3af PoE standard, allowing it to deliver up to 15.4 watts of power per port.
Can the Cisco WS-X6148-45AF be used in any Cisco Catalyst 6500 Series chassis?
Yes, the Cisco WS-X6148-45AF is designed to be compatible with various Cisco Catalyst 6500 Series chassis. However, it is always recommended to check the specific model and configuration requirements of the chassis being used.
What are the interface types available on the Cisco WS-X6148-45AF?
The Cisco WS-X6148-45AF features 48 Ethernet 10/100 ports that can accommodate a wide range of network devices.
Is there any specific software version required to operate the Cisco WS-X6148-45AF Line Card?
Yes, specific Cisco IOS Software versions may be required to fully utilize the features of the Cisco WS-X6148-45AF. It is advisable to review the compatibility and release notes for the exact IOS version needed.
Does this line card support redundancy features?
Yes, when installed in a compatible Catalyst 6500 Series switch, the Cisco WS-X6148-45AF can support various redundancy features provided by the switch, enhancing network reliability and uptime.
What is the power consumption of the Cisco WS-X6148-45AF Line Card?
The power consumption can vary depending on the number of PoE devices connected and their power requirements. Typically, the line card itself has a baseline power consumption which increases as more PoE devices are connected and powered.
Is the Cisco WS-X6148-45AF capable of supporting both Layer 2 and Layer 3 switching?
The Cisco WS-X6148-45AF primarily supports Layer 2 switching. For Layer 3 functionalities, additional modules or supervisors with Layer 3 capabilities may be required within the Catalyst 6500 chassis.