{"product_id":"cisco-ucsxe-m2-480g-ucs-xe-series-480gb-m-2-sata-boot-ssd-micron-g2","title":"Cisco UCSXE-M2-480G | UCS XE-Series 480GB M.2 SATA Boot SSD, Micron G2","description":"\u003cp\u003eThe UCSXE-M2-480G is a 480GB M.2 SATA boot solid-state drive built on Micron G2 flash, designed for Cisco UCS XE-Series compute nodes such as the UCS XE130c M8. It suits edge and AI deployments that need a dedicated boot volume separate from the main data drives.\u003c\/p\u003e\u003cp\u003eThe drive is installed on the node's M.2 boot-optimised RAID controller, UCSXE-M2-HWRD2, and is ordered in matched pairs. Paired drives support RAID 1 or JBOD, and the 480GB capacity sits between the 240GB and 960GB options in the same range. Capacities cannot be mixed within a single compute node. Boot mode is UEFI only, and Cisco recommends the drives for boot-only use.\u003c\/p\u003e\u003cp\u003eThe XE130c M8 compute node is housed in the UCS XE9305 chassis. Cisco Intersight can configure volumes and monitor the controller and installed M.2 drives. The drives are not hot-plug, so the compute node must be powered off before replacement. No licence is needed for the SSD itself.\u003c\/p\u003e\u003cp\u003eEnquire with XS Network Tech for new or used pricing and availability.\u003c\/p\u003e","brand":"Cisco","offers":[{"title":"Default Title","offer_id":67729118036138,"sku":"UCSXE-M2-480G","price":0.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0661\/9181\/8922\/files\/RR0HYu8DlkevFDgel3Bnwg.c-r.jpg?v=1792714965","url":"https:\/\/www.xsnet.com.au\/products\/cisco-ucsxe-m2-480g-ucs-xe-series-480gb-m-2-sata-boot-ssd-micron-g2","provider":"XS Network Tech","version":"1.0","type":"link"}