{"title":"Server Power Supplies","description":"\u003cp\u003eGenuine and compatible PSUs for servers from Cisco, Dell, Lenovo, Supermicro, HPe and more. Stocked in new and used condition.\u003c\/p\u003e","products":[{"product_id":"hpe-656364-b21-1200w-hot-plug-server-power-supply-common-slot-form-factor-platinum-plus-efficiency-1","title":"HPE 656364-B21 | Common Slot 1200W Platinum Plus Hot Plug Power Supply","description":"\u003cp\u003eThis 1200W Common Slot power supply is a hot-plug, tool-less AC module for HPE ProLiant servers that use Common Slot bays. It suits rack, tower and scale-out ProLiant systems and storage solutions where efficient, right-sized or redundant power is needed in a data centre.\u003c\/p\u003e\u003cp\u003eThe module delivers 1200W output from a 100-240V AC input at 50\/60Hz, with efficiency of about 94% and 80 PLUS Platinum certification. The Platinum Plus rating and hot-plug design are what set this 1200W unit apart from other Common Slot power supply variants. It supports Power Discovery Services through its blue plug and forms part of the Thermal Discovery Services approach to power and cooling management.\u003c\/p\u003e\u003cp\u003eIt is listed for ProLiant DL360, DL380, ML350 and SL230\/SL250 series servers, as well as the DL580 Gen8, ML350p Gen8, SL4540 Gen8 and SL4545 G7. Use the same spare part number in each server so the power supplies match.\u003c\/p\u003e\u003cp\u003eEnquire with XS Network Tech for new or used pricing and availability.\u003c\/p\u003e","brand":"HPE","offers":[{"title":"Default Title","offer_id":47505469702314,"sku":"656364-B21","price":0.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0661\/9181\/8922\/files\/XIkFGJAnzE2NL5WkspwknA.c-r_e024bbc7-8ab8-4bbe-9fcd-a839a93e3850.jpg?v=1760312736"},{"product_id":"hpe-798095-b21-2650w-hot-plug-psu-kit-80-plus-titanium-high-performance-redundant-ready-module-data-center-ac-input-1","title":"HPE 798095-B21 | Synergy 12000F 2650W AC Titanium Power Supply","description":"\u003cp\u003eThis hot-plug AC power supply is built for the HPE Synergy 12000 Frame and delivers up to 2650W per unit. It suits data centre composable-infrastructure deployments that run on 200-240 VAC power and need efficient, redundant frame power.\u003c\/p\u003e\u003cp\u003eThe supply is 80 PLUS Titanium rated at 96% efficiency and accepts 200-240 Vrms input at 50-60 Hz. Maximum output is 2650W at every nominal input voltage, with nominal input current of 14.4 A at 200 Vrms falling to 12.0 A at 240 Vrms. Input uses an IEC C19-C20 connection, and APP Saf-D-Grid cables are ordered separately. It includes Intelligent Auto-Discovery features for HPE OneView.\u003c\/p\u003e\u003cp\u003eA Synergy 12000 Frame holds up to six power supplies, and every supply in a frame must be the same type. Mixing is only supported when hot-swapping to a different level or more efficient supply. HPE Power Advisor can be used to size the number of supplies for a given frame configuration.\u003c\/p\u003e\u003cp\u003eEnquire with XS Network Tech for new or used pricing and availability.\u003c\/p\u003e","brand":"HPE","offers":[{"title":"Default Title","offer_id":47505481793706,"sku":"798095-B21","price":0.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0661\/9181\/8922\/files\/Gt4vIkxaqEaKD6TezjUnKw.c-r_e04511e5-1455-439d-9620-156ee183cdd2.jpg?v=1760312767"},{"product_id":"hpe-830272-b21-1600w-flex-slot-psu-80-plus-platinum-hot-plug-low-halogen-1","title":"HPE 830272-B21 | Flex Slot 1600W Platinum Hot-Plug Power Supply, Gen10","description":"\u003cp\u003eThis 1600W Flex Slot power supply is a hot-plug, tool-less module for HPE ProLiant Gen10 rack servers such as the DL360 and DL380 class. It suits data centres with 200-240V AC feeds where redundant or non-redundant power is needed, and its common Flex Slot form factor lets different server platforms share power supply spares.\u003c\/p\u003e\u003cp\u003eIt is 80PLUS Platinum certified, with measured efficiency of 92.2 to 92.8 percent across the 200 to 240V input range and a power factor of 1.00. Maximum rated output is 1600W, drawing up to about 1734W at the input. It accepts 200-240V AC at 50-60Hz as high-line input only, and also supports 240VDC. It is a Low Halogen design and uses a C14 input connector.\u003c\/p\u003e\u003cp\u003eIt is the Gen10 version of the 1600W Flex Slot supply. Gen10 Plus and Gen11 servers use the P38997-B21 equivalent instead. Low Halogen supplies are not compatible with Gen9 servers. For redundancy, fit matching power supplies with the same output and efficiency rating in each bay.\u003c\/p\u003e\u003cp\u003eEnquire with XS Network Tech for new or used pricing and availability.\u003c\/p\u003e","brand":"HPE","offers":[{"title":"Default Title","offer_id":47505503879338,"sku":"830272-B21","price":0.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0661\/9181\/8922\/files\/wWKuJIrneUavgK96jsAUiQ.c-r_6175013e-3893-4f9a-9044-398652f3fc7e.jpg?v=1760312818"},{"product_id":"hpe-865408-b21-500w-flex-slot-psu-80-plus-platinum-hot-plug-redundant-ready-1","title":"HPE 865408-B21 | Flex Slot 500W Platinum Hot-Plug Power Supply, C14","description":"\u003cp\u003eThe HPE 500W Flex Slot Platinum Power Supply is a hot-plug power supply module for HPE ProLiant Gen10 servers. It suits primary or redundant power supply replacement and upgrades in rack and tower servers from the HPE Flexible Slot power supply family.\u003c\/p\u003e\u003cp\u003eIt delivers up to 500 W (563 VA) at 12 V in a 1U plug-in module and is 80 PLUS Platinum certified, with efficiency of up to 94%. It accepts 100-240 V AC at 50\/60 Hz, and also supports 240 VDC input (180-320 VDC). The AC connection is a standard IEC 60320 C14 inlet, and the module uses low-halogen construction.\u003c\/p\u003e\u003cp\u003eIt can be installed as a redundant pair and is intended for ProLiant Gen10 systems including the DL20, DL180, DL360, DL380, DL388, ML110, ML350 and BL460c, as well as StoreEasy 1000 storage. It shares the Flex Slot form factor with the 800W (865414-B21) and 1600W (830272-B21) Platinum kits.\u003c\/p\u003e\u003cp\u003eEnquire with XS Network Tech for new or used pricing and availability.\u003c\/p\u003e","brand":"HPE","offers":[{"title":"Default Title","offer_id":47505511317674,"sku":"865408-B21","price":0.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0661\/9181\/8922\/files\/UunlfHXSEEe4FbnsPe-6BQ.c-r_4002ddfb-c636-4faf-a1f7-aee2d10865e0.jpg?v=1760312863"},{"product_id":"hpe-865414-b21-800w-flex-slot-psu-80-plus-platinum-hot-plug-redundant-ready-1","title":"HPE 865414-B21 | Flex Slot 800W Platinum Hot-Plug Power Supply","description":"\u003cp\u003eThe HPE 800W Flex Slot Platinum Hot Plug Low Halogen Power Supply Kit is a server power supply module for HPE ProLiant rack servers in enterprise data centres. It suits primary or redundant power supply replacement and upgrade work, and belongs to the HPE Flexible Slot (Flex Slot) power supply family.\u003c\/p\u003e\u003cp\u003eThe module delivers 800W of output power from an AC input of 100-240V at 50-60Hz, connected through an IEC 60320 C14 inlet. It is a hot-plug design, so it can be serviced without tools, and it is redundant-ready for higher availability. Construction is low halogen, and the Flex Slot form factor is about 25% smaller than previous-generation power supplies, leaving more room in the chassis for server options.\u003c\/p\u003e\u003cp\u003eIt fits Flex Slot power supply bays in HPE ProLiant Gen10 servers, such as the DL360 Gen10 and DL380 Gen10, as well as ProLiant 300 Series Gen9 servers, which keeps spares strategy simple across a mixed fleet.\u003c\/p\u003e\u003cp\u003eEnquire with XS Network Tech for new or used pricing and availability.\u003c\/p\u003e","brand":"HPE","offers":[{"title":"Default Title","offer_id":47505511383210,"sku":"865414-B21","price":0.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0661\/9181\/8922\/files\/Lk4d84yz60yAZQn4rhkw9Q.c-r_f14a229e-030c-4ea4-a6ed-672102c6fc9e.jpg?v=1760312865"},{"product_id":"hpe-865428-b21-800w-flex-slot-hot-plug-psu-200-240vac-240vdc-hvdc-universal-ac-dc-low-halogen-redundant-ready-1","title":"HPE 865428-B21 | Flex Slot 800W Hot-Plug Power Supply, 200-240VAC\/240VDC HVDC, Low Halogen","description":"\u003cp\u003eThis 800W Flex Slot power supply is a hot-plug, tool-less module for HPE servers that use the Flex Slot form factor. It suits ProLiant and similar servers where a hot-swappable, redundant-ready power supply is needed for continuous operation.\u003c\/p\u003e\u003cp\u003eThe unit is rated at 800W and accepts a 200-240VAC or 240VDC HVDC input, making it a universal AC\/DC power supply. It is a low-halogen design. Flex Slot power supplies share a common electrical and physical design, so the module installs without tools and can be fitted as a redundant pair for added resilience.\u003c\/p\u003e\u003cp\u003eCheck that your server model uses Flex Slot power supplies before ordering. The 800W rating and the 200-240VAC\/240VDC HVDC input are the key points to match against your rack power feed and server power requirements.\u003c\/p\u003e\u003cp\u003eEnquire with XS Network Tech for new or used pricing and availability.\u003c\/p\u003e","brand":"HPE","offers":[{"title":"Default Title","offer_id":47505511448746,"sku":"865428-B21","price":0.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0661\/9181\/8922\/files\/tpc6akhhckGkcKPxBlVwnQ.c-r_a1cde354-7255-4c07-85b5-23aa86009a15.jpg?v=1760312865"},{"product_id":"hpe-865434-b21-800w-flex-slot-hot-plug-psu-48vdc-telecom-input-low-halogen-redundant-ready-1","title":"HPE 865434-B21 | Flex Slot 800W -48VDC Hot-Plug Power Supply, Low Halogen","description":"\u003cp\u003eThe HPE Flex Slot 800W power supply is a hot-plug, tool-less module built for HPE ProLiant servers that run from a -48VDC telecom-style supply. It suits DC-powered data centres, telecom central offices and NEBS-style environments that need server power with hot-plug redundancy, and it uses a low halogen construction.\u003c\/p\u003e\u003cp\u003eThe module delivers 800 W (883 VA) of power capacity from a nominal -48 VDC input, with an accepted input range of -40 to -72 VDC. It is listed at up to 94% efficiency and supports 1+1 redundant power configurations, so a server keeps running if one supply fails. The Flex Slot module measures 1.60 in high, 2.70 in wide and 8.90 in deep.\u003c\/p\u003e\u003cp\u003eIt is designed for HPE ProLiant Gen9 and Gen10 servers that use Flex Slot power supply bays. This is the DC-input model, so it is not interchangeable with the AC Platinum 865414-B21. Related part numbers are spare 866728-001 and assembly 865432-401.\u003c\/p\u003e\u003cp\u003eEnquire with XS Network Tech for new or used pricing and availability.\u003c\/p\u003e","brand":"HPE","offers":[{"title":"Default Title","offer_id":47505511579818,"sku":"865434-B21","price":0.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0661\/9181\/8922\/files\/VN1PQKNJaUubU4sjmx4-Ww.c-r_f2749021-e997-41cb-b7aa-398c369aca24.jpg?v=1760312867"},{"product_id":"hpe-865438-b21-800w-flex-slot-hot-plug-psu-80-plus-titanium-200-240vac-low-halogen-redundant-ready-1","title":"HPE 865438-B21 | Flex Slot 800W Titanium Power Supply, High-Line, Gen10","description":"\u003cp\u003eThis hot-plug 800W power supply is part of the HPE Flexible Slot (Flex Slot) range for ProLiant Gen10 and other compatible servers. It suits rack, tower and Apollo servers in data centres where 200-240V power is available and efficiency matters, either as a single supply or as one half of a redundant pair.\u003c\/p\u003e\u003cp\u003eIt delivers up to 800W and is 80 PLUS Titanium certified, with measured efficiency of 94.0 to 94.3 percent across 200-240V nominal input. Input is high-line AC only at 200-240 V rms, 50-60 Hz, with 240 VDC also supported. Maximum input draw is about 851W or 860 VA, with a nominal input current of 3.6 to 4.3 A. It uses a standard C-14 inlet and has a tool-less hot-plug design. The low halogen construction means it is not compatible with Gen9 servers.\u003c\/p\u003e\u003cp\u003eIt is intended for most ProLiant Gen10 platforms, including DL360, DL380, DL560 and DL580 Gen10, as well as selected ML and Apollo models. Gen11 and Gen12 servers and the Gen10 Plus variants of several platforms require the P38995-B21 800W supply instead. Match output and efficiency ratings when pairing two supplies, and confirm against the server QuickSpecs before ordering.\u003c\/p\u003e\u003cp\u003eEnquire with XS Network Tech for new or used pricing and availability.\u003c\/p\u003e","brand":"HPE","offers":[{"title":"Default Title","offer_id":47505511645354,"sku":"865438-B21","price":0.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0661\/9181\/8922\/files\/kQJR7qtyuUSq4cicKOyzlg.c-r_483c54c9-9215-40ba-9281-cfe6916ab95d.jpg?v=1760312869"},{"product_id":"hpe-874571-b21-gen10-power-supply-cage-kit-dual-psu-bay-enclosure-aluminum-alloy-tool-less-retention-1","title":"HPE 874571-B21 | ProLiant Gen10 Dual-PSU Power Supply Cage Kit","description":"\u003cp\u003eThis power supply cage kit is designed for HPE Gen10 servers and provides a dual power supply bay enclosure for housing redundant server power supplies. Built from aluminium alloy, it features tool-less retention for straightforward installation and servicing. It suits data centre and server room deployments where redundant power supply configurations are required.\u003c\/p\u003e \u003cp\u003eEnquire with XS Network Tech for new or used pricing and availability.\u003c\/p\u003e","brand":"HPE","offers":[{"title":"Default Title","offer_id":47505517084842,"sku":"874571-B21","price":0.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0661\/9181\/8922\/files\/CVi289-WCUmm_uT7KM2kHA.c-r.jpg?v=1760394830"},{"product_id":"hpe-876929-b21-2900-3400w-hot-plug-psu-kit-80-plus-titanium-200-277vac-redundant-ready-1","title":"HPE 876929-B21 | 2900-3400W Hot-Plug Power Supply Kit, 200-277VAC","description":"\u003cp\u003eHot-plug power supply kit rated at 2900-3400W for HPE server platforms, designed for 200-277VAC input. It is suited to high-density server deployments that need a high-capacity, hot-swappable PSU and can be used in redundant power configurations to support continuous operation.\u003c\/p\u003e \u003cp\u003eEnquire with XS Network Tech for new or used pricing and availability.\u003c\/p\u003e","brand":"HPE","offers":[{"title":"Default Title","offer_id":47505517969578,"sku":"876929-B21","price":0.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0661\/9181\/8922\/files\/tv6GupqqiUeR3D9ENIRz0A.c-r_6a5859e1-97cb-4a03-ad18-4b82b025801a.jpg?v=1760312934"},{"product_id":"hpe-876935-b21-1800-2200w-flex-slot-hot-plug-psu-kit-80-plus-platinum-200-277vac-redundant-ready-1","title":"HPE 876935-B21 | Flex Slot 1800-2200W Platinum PSU, 200-240V AC","description":"\u003cp\u003eThis HPE Flex Slot Platinum power supply is a hot-plug, redundant-capable unit for HPE Apollo 2000 Gen10 server systems. It suits deployments that need high power density from high-line input and can run as a single supply or as part of a redundant pair.\u003c\/p\u003e\u003cp\u003eOutput scales with the input voltage, from 1800W at 200V up to 2200W at 240V, with 1900W at 208V, 2000W at 220V and 2100W at 230V. It accepts 200-240V AC at 50-60 Hz through a standard C-14 inlet, with a power factor of 0.99 and efficiency of about 92.7 to 93.2 percent across the listed input voltages. Maximum inrush current is 30A peak for 10 ms.\u003c\/p\u003e\u003cp\u003eThe tool-less Flex Slot form factor allows quick servicing, and two identical supplies can run in load-balanced or high-efficiency redundant modes. For redundancy, fit two supplies with the same output and efficiency ratings. This model is supported on Apollo 2000 Gen10 systems only.\u003c\/p\u003e\u003cp\u003eEnquire with XS Network Tech for new or used pricing and availability.\u003c\/p\u003e","brand":"HPE","offers":[{"title":"Default Title","offer_id":47505518035114,"sku":"876935-B21","price":0.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0661\/9181\/8922\/files\/tHLH-nxUVkalcNeJcWo9Eg.c-r_772463e4-ea12-49f5-8ade-e1b1efbf65e5.jpg?v=1760312937"},{"product_id":"cisco-c885a-psu-2700w-2700w-psu-12v-bus-titanium-efficiency-ac-dc-input-hot-swap-redundant-ready","title":"Cisco C885A-PSU-2700W | UCS C885A M8 2700W 12V Titanium CPU Tray Power Supply","description":"\u003cp\u003eThis is a 2700W, 12V AC\/DC power supply with 80 PLUS Titanium efficiency for the Cisco UCS C885A M8 dense-GPU rack server. It powers the CPU tray of the server and is intended for AI and machine learning training, fine-tuning, large model inferencing, RAG and HPC deployments, as well as for replacing a PSU in an existing C885A M8 system.\u003c\/p\u003e\u003cp\u003eThe unit delivers 2700W at 12V in a CRPS format and accepts a 200-240Vac, 50-60Hz input at 14.5A or 16A per supply. Two of these supplies are fitted in each server for the CPU tray in a 1+1 redundant arrangement. The six 54V 3000W supplies (C885A-PSU-3000W) power the GPU and system side separately, and full server consumption can reach 12.5 kW, so input power planning matters.\u003c\/p\u003e\u003cp\u003eIt is designed for the Cisco UCS C885A M8 rack server, including the UCSC-885A-M8-M352, M353, M354, M355 and M356 configurations as well as earlier H100, H200 and MI300X variants. Input power cords are selected from the options listed for the server, including CAB-C13-CBN, CAB-C19-C20-IND, CAB-SABS-C19-IND, CAB-C19-C20-3M-JP and CAB-AC-16A-AUS.\u003c\/p\u003e\u003cp\u003eEnquire with XS Network Tech for new or used pricing and availability.\u003c\/p\u003e","brand":"Cisco","offers":[{"title":"Default Title","offer_id":47505898995882,"sku":"C885A-PSU-2700W","price":0.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0661\/9181\/8922\/files\/486802.jpg?v=1762122982"},{"product_id":"cisco-c885a-psu-3000w-3000w-psu-54v-bus-high-efficiency-200-240v-ac-hot-swap-redundant-ready","title":"Cisco C885A-PSU-3000W | UCS C885A M8 Power Supply, 3000W, 54V","description":"\u003cp\u003eThis 3000W, 54V power supply is built for the Cisco UCS C885A M8 rack server, a dense GPU platform used for deep learning and LLM training, model fine-tuning, large model inferencing, RAG and HPC workloads. It supplies the 54V rail for the GPU and system side of the server, and it also suits field replacement in existing C885A M8 deployments.\u003c\/p\u003e\u003cp\u003eEach unit delivers 3000W at 54V from an AC input of 200-240Vac, 50-60Hz, drawing up to 16A. Six of these power supplies are installed in each server in a 4+2 (N+2) redundant arrangement, and the system carries an 80 PLUS Titanium efficiency rating. The server's CPU tray is powered separately by two 2700W 12V power supplies (C885A-PSU-2700W), so this part covers only the GPU and system side.\u003c\/p\u003e\u003cp\u003eIt is compatible with the UCS C885A M8 rack server SKUs UCSC-885A-M8-M352, M353, M354, M355 and M356. AC power cords are selected separately, with options including CAB-AC-16A-AUS (250VAC, 16A, Australia C19), CAB-C19-C20-IND, CAB-SABS-C19-IND and CAB-C19-C20-3M-JP.\u003c\/p\u003e\u003cp\u003eEnquire with XS Network Tech for new or used pricing and availability.\u003c\/p\u003e","brand":"Cisco","offers":[{"title":"Default Title","offer_id":47505899061418,"sku":"C885A-PSU-3000W","price":0.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0661\/9181\/8922\/files\/486803.jpg?v=1762122982"},{"product_id":"cisco-c885l-psu-3200w-3200w-54v-dc-output-psu-hot-swap-high-efficiency-for-c885l-m8-chassis","title":"Cisco C885L-PSU-3200W | UCS C885L M8 3200W 54V DC Power Supply","description":"\u003cp\u003eThis power supply is a replacement part for the Cisco UCS C885L M8 server platform, part of the UCS C-Series range. It suits data centre and AI infrastructure deployments where a C885L M8 needs additional or replacement power capacity.\u003c\/p\u003e\u003cp\u003eThe unit provides 3200W of output at 54V DC. These two figures are what separate it from other power supply options, so confirm the rating matches the requirements of your server configuration before ordering.\u003c\/p\u003e\u003cp\u003eIt is intended for use with the Cisco UCS C885L M8. Check the part number against your server build to make sure it matches the power supply slot and the power rating your configuration needs.\u003c\/p\u003e\u003cp\u003eEnquire with XS Network Tech for new or used pricing and availability.\u003c\/p\u003e","brand":"Cisco","offers":[{"title":"Default Title","offer_id":47505899815082,"sku":"C885L-PSU-3200W","price":0.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0661\/9181\/8922\/files\/Cisco.png?v=1773790226"},{"product_id":"cisco-c890-m5-power-su-hot-swap-redundant-ac-psu-for-c890-m5","title":"Cisco C890-M5-POWER-SU | UCS C890 M5 Hot-Swap Redundant AC Power Supply","description":"\u003cp\u003eHot-swap redundant AC power supply unit for the Cisco UCS C890 M5 rack server platform. The hot-swap design allows a power supply to be replaced without shutting down the server, supporting redundant power configurations in enterprise and data centre deployments. Suited to operators maintaining or expanding C890 M5 servers who need a compatible AC power supply.\u003c\/p\u003e \u003cp\u003eEnquire with XS Network Tech for new or used pricing and availability.\u003c\/p\u003e","brand":"Cisco","offers":[{"title":"Default Title","offer_id":47505909088426,"sku":"C890-M5-POWER-SU","price":0.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0661\/9181\/8922\/files\/datasheet-c78-744647_0_b3a22fe5-56f6-42f2-a1f2-f276e05c025a.png?v=1761696038"},{"product_id":"cisco-ds-cac-2500w-ac-psu-2500w-hot-swappable-director-class-chassis-n-1-ready","title":"Cisco DS-CAC-2500W | 2500W AC Hot-Swappable Power Supply for MDS Director","description":"\u003cp\u003eThis 2500W AC power supply is designed for director-class chassis installations. It is hot-swappable, allowing replacement or addition without powering down the chassis, and supports N+1 redundancy configurations to help maintain uptime. It suits data centre and storage networking deployments that require resilient, high-capacity AC power.\u003c\/p\u003e \u003cp\u003eEnquire with XS Network Tech for new or used pricing and availability.\u003c\/p\u003e","brand":"Cisco","offers":[{"title":"Default Title","offer_id":47506271895722,"sku":"DS-CAC-2500W","price":0.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0661\/9181\/8922\/files\/DS-CAC-2500W.jpg?v=1763086364"},{"product_id":"cisco-ds-cac97-3kw-3000w-ac-psu-hot-swappable-director-class-module-for-mds-9700-chassis","title":"Cisco DS-CAC97-3KW | MDS 9700 3000W AC Power Supply, Hot-Swappable","description":"\u003cp\u003eThis 3000W AC power supply module is designed for Cisco MDS 9700 series multilayer director chassis. The hot-swappable, director-class module supplies power to the Fibre Channel chassis, making it suited to storage area network deployments that need dependable power delivery. The 3000W AC rating distinguishes this unit from other power supply options for the MDS 9700 platform.\u003c\/p\u003e \u003cp\u003eEnquire with XS Network Tech for new or used pricing and availability.\u003c\/p\u003e","brand":"Cisco","offers":[{"title":"Default Title","offer_id":47506272288938,"sku":"DS-CAC97-3KW","price":0.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0661\/9181\/8922\/files\/cisco-ds-cac97-3kw-rf_1.jpg?v=1761109935"},{"product_id":"cisco-ds-cdc97-3kw-3000w-dc-psu-48v-class-hot-swappable-director-class-module-for-mds-9700-chassis","title":"Cisco DS-CDC97-3KW | MDS 9700 3000W DC Power Supply, Hot-Swappable","description":"\u003cp\u003eThis 3000W DC-input power supply module is designed for Cisco MDS 9700 Series director chassis, including the MDS 9706, 9710 and 9718. It suits data centres running -48V DC plant power and provides the DC-fed alternative to the 3000W AC module (DS-CAC97-3KW) and the 3.5kW HVAC\/HVDC module (DS-CHV-3.5KW). The hot-swappable design supports director-class availability by allowing modules to be replaced without taking the chassis offline.\u003c\/p\u003e \u003cp\u003eEnquire with XS Network Tech for new or used pricing and availability.\u003c\/p\u003e","brand":"Cisco","offers":[{"title":"Default Title","offer_id":47506272354474,"sku":"DS-CDC97-3KW","price":0.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0661\/9181\/8922\/files\/Cisco.png?v=1773790226"},{"product_id":"cisco-hci-psu-6332-ac-ucs-fi-6332-6454-psu-ac-100-240v-hot-swappable-fru-1-1-redundant-ready","title":"Cisco HCI-PSU-6332-AC | UCS 6300\/6400 650W AC Power Supply, 100-240V, Hot-Swap","description":"\u003cp\u003eThis 650 W AC power supply module is designed for Cisco UCS 6332 and UCS 6454 Fabric Interconnects, accepting a wide 100-240 VAC input. It is a hot-swappable field-replaceable unit installed as an identical pair for 1+1 redundancy and is 80 PLUS Platinum efficient. This HCI-prefixed SKU is the AC variant for the HyperFlex FI 6454, and it differs from the DC -48V sibling in input type and rating.\u003c\/p\u003e \u003cp\u003eEnquire with XS Network Tech for new or used pricing and availability.\u003c\/p\u003e","brand":"Cisco","offers":[{"title":"Default Title","offer_id":47506535874730,"sku":"HCI-PSU-6332-AC","price":0.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0661\/9181\/8922\/files\/bXU-xrtOW02suFbzrMPENg.c-r_e42f0fd2-20ed-491d-9571-25368baf2554.jpg?v=1761269971"},{"product_id":"cisco-hci-psu-6332-acm6-ucs-fi-6332-6454-psu-ac-100-240v-hot-swappable-fru-1-1-redundant-ready","title":"Cisco HCI-PSU-6332-ACM6 | UCS 6332\/6454 Power Supply, AC 100-240V, 650W","description":"\u003cp\u003eThis 650 W hot-swappable AC power supply module is designed for Cisco UCS 6332 and UCS 6454 Fabric Interconnects. It accepts 100 to 240 VAC input and delivers 12 VDC output, with Climate Savers Platinum (80Plus Platinum) efficiency. Two identical units provide 1+1 redundant operation in the fabric interconnect, and this AC variant is the HCI\/M6 ordering SKU, distinct from the DC sibling which uses -48 VDC input.\u003c\/p\u003e \u003cp\u003eEnquire with XS Network Tech for new or used pricing and availability.\u003c\/p\u003e","brand":"Cisco","offers":[{"title":"Default Title","offer_id":47506535973034,"sku":"HCI-PSU-6332-ACM6","price":0.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0661\/9181\/8922\/files\/bXU-xrtOW02suFbzrMPENg.c-r_19d1269c-6a95-4664-86a7-ec1d120744c5.jpg?v=1761269971"},{"product_id":"cisco-hci-psu-6332-dc-ucs-fi-6332-6454-64108-psu-48v-dc-input-hot-swappable-fru-1-1-redundant-ready","title":"Cisco HCI-PSU-6332-DC | UCS 6300\/6400 Fabric Interconnect 48V DC Power Supply","description":"\u003cp\u003e48V DC input power supply for Cisco UCS 6332, 6454 and 64108 Fabric Interconnects. Designed as a hot-swappable field-replaceable unit, it allows a failed or replacement module to be fitted without taking the chassis offline. Fitting two units in 1+1 redundant configuration provides power resilience for data centre fabric interconnect deployments with DC power feeds.\u003c\/p\u003e \u003cp\u003eEnquire with XS Network Tech for new or used pricing and availability.\u003c\/p\u003e","brand":"Cisco","offers":[{"title":"Default Title","offer_id":47506536038570,"sku":"HCI-PSU-6332-DC","price":0.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0661\/9181\/8922\/files\/cisco-UCS-PSU-6332-DC.jpg?v=1763951931"},{"product_id":"cisco-hci-psu-6332-dcm6-ucs-fi-6332-6454-64108-psu-48v-dc-input-hot-swappable-fru-1-1-redundant-ready","title":"Cisco HCI-PSU-6332-DCM6 | UCS 6300\/6400 Fabric Interconnect PSU, -48VDC, 930W","description":"\u003cp\u003eThis hot-swappable power supply module is designed for Cisco UCS 6332, 6332-16UP, 6454 and 64108 Fabric Interconnects. It operates from a -48VDC input and delivers up to 930 W of output power, making it suited to DC-powered data centre and telco environments. Units are installed in identical pairs for 1+1 redundancy, and can be replaced in the field without taking the fabric interconnect offline. This -48VDC, 930 W version is distinct from the 100-240VAC, 650 W variant.\u003c\/p\u003e \u003cp\u003eEnquire with XS Network Tech for new or used pricing and availability.\u003c\/p\u003e","brand":"Cisco","offers":[{"title":"Default Title","offer_id":47506536169642,"sku":"HCI-PSU-6332-DCM6","price":0.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0661\/9181\/8922\/files\/cisco-UCS-PSU-6332-DC.jpg?v=1763951931"},{"product_id":"cisco-hci-psu-64108-ac-ac-psu-module-100-240v-hot-swap-redundant-ready-for-ucs-64108-fi","title":"Cisco HCI-PSU-64108-AC | UCS 6400 1200W AC Power Supply, 100-240VAC, Hot-Swap","description":"\u003cp\u003e1200 W hot-swappable AC power supply for the Cisco UCS 64108 Fabric Interconnect, accepting 100-240 VAC input. Two identical modules operate in a 1+1 redundant configuration, and the 80 PLUS Platinum design delivers high efficiency in data centre deployments. This AC variant suits environments powered from standard mains supply and cannot be mixed with DC power supplies in the same chassis.\u003c\/p\u003e \u003cp\u003eEnquire with XS Network Tech for new or used pricing and availability.\u003c\/p\u003e","brand":"Cisco","offers":[{"title":"Default Title","offer_id":47506536267946,"sku":"HCI-PSU-64108-AC","price":0.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0661\/9181\/8922\/files\/datasheet-c78-741116_2_77e57637-add2-4841-8fda-090c93097d55.png?v=1761269972"},{"product_id":"cisco-hci-psu-64108acm6-ac-psu-module-100-240v-hot-swap-redundant-ready-for-ucs-64108-fi","title":"Cisco HCI-PSU-64108ACM6 | UCS 64108 Power Supply, 1200W, 100-240VAC","description":"\u003cp\u003eHot-swappable 1200W AC power supply module for the Cisco UCS 64108 Fabric Interconnect, accepting 100-240VAC input. Used as the AC PSU for the HCI Fabric Interconnect 64108 in Cisco Compute Hyperconverged M6 configurations, with 80 Plus Platinum efficiency and 1+1 redundancy when two units are fitted per chassis. The AC variant is intended for AC-fed racks, in contrast to the -48VDC sibling model.\u003c\/p\u003e \u003cp\u003eEnquire with XS Network Tech for new or used pricing and availability.\u003c\/p\u003e","brand":"Cisco","offers":[{"title":"Default Title","offer_id":47506536366250,"sku":"HCI-PSU-64108ACM6","price":0.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0661\/9181\/8922\/files\/datasheet-c78-741116_2_15c9ad25-bb9b-45f4-a356-1c2079bf4f42.png?v=1761269973"},{"product_id":"cisco-hci-psu-6536-ac-1100w-ac-psu-100-240v-hot-swap-port-side-exhaust-redundant-ready-for-ucs-6536-fi","title":"Cisco HCI-PSU-6536-AC | UCS 6536 Power Supply, 1100W AC, Port-Side Exhaust","description":"\u003cp\u003eThis 1100W AC power supply is a hot-swappable module for the Cisco UCS 6536 Fabric Interconnect, part of the UCS 6500 Series. It accepts 100-240 VAC input and delivers 12 VDC output with port-side exhaust airflow. It is installed in a 1+1 redundant configuration, with one unit active and one on standby, so a failed supply can be replaced while the chassis stays running. Choose this port-side exhaust variant when the chassis ports sit in the hot aisle and intake is from the cold aisle.\u003c\/p\u003e \u003cp\u003eEnquire with XS Network Tech for new or used pricing and availability.\u003c\/p\u003e","brand":"Cisco","offers":[{"title":"Default Title","offer_id":47506536464554,"sku":"HCI-PSU-6536-AC","price":0.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0661\/9181\/8922\/files\/datasheet-c78-741116_2_fd1e8b6d-3d1a-4902-b4f7-39f5a422d921.png?v=1761269974"},{"product_id":"cisco-hci-psu-6536-acm6-1100w-ac-psu-100-240v-hot-swap-port-side-exhaust-redundant-ready-for-ucs-6536-fi","title":"Cisco HCI-PSU-6536-ACM6 | UCS 6536 1100W AC Power Supply, Port-Side Exhaust","description":"\u003cp\u003eHot-swappable 1100W AC power supply module for the Cisco UCS 6536 Fabric Interconnect, accepting 100-240V input and using port-side exhaust airflow. It is installed in pairs for 1+1 redundancy, so one unit can be replaced while the other keeps the Fabric Interconnect running. Choose this port-side exhaust variant when every fan and power supply in the chassis must share the same airflow direction.\u003c\/p\u003e \u003cp\u003eEnquire with XS Network Tech for new or used pricing and availability.\u003c\/p\u003e","brand":"Cisco","offers":[{"title":"Default Title","offer_id":47506536562858,"sku":"HCI-PSU-6536-ACM6","price":0.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0661\/9181\/8922\/files\/datasheet-c78-741116_2_5beded3f-369c-4cef-8fdd-07835f9ceadf.png?v=1761269975"},{"product_id":"cisco-hci-psu1-1050w-m6-1050w-ac-hot-swap-psu-80-plus-platinum-auto-ranging-ac-input-n-1-redundancy-support-for-c-series-rack-servers-not-eu-uk-lot-9-compliant","title":"Cisco HCI-PSU1-1050W-M6 | HCI M6 1050W AC Platinum Power Supply, Not Lot 9","description":"\u003cp\u003eThis 1050W AC hot-plug power supply is designed for Cisco M6 HCI-series and UCS C-Series rack servers. It is 80 PLUS Platinum rated, accepts both low-line (100-120 VAC) and high-line (200-240 VAC) input, and supports redundant operation with two identical PSUs. This variant is not EU\/UK Lot 9 compliant.\u003c\/p\u003e \u003cp\u003eEnquire with XS Network Tech for new or used pricing and availability.\u003c\/p\u003e","brand":"Cisco","offers":[{"title":"Default Title","offer_id":47506536661162,"sku":"HCI-PSU1-1050W-M6","price":0.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0661\/9181\/8922\/files\/E5kXTFwqz02SnmQxclxL_Q.c-r_dd3dadaf-83c6-4cfe-a2c0-845667779376.jpg?v=1762131641"},{"product_id":"cisco-hci-psu1-1200w-1200w-ac-hot-swap-psu-80-plus-titanium-auto-ranging-ac-input-n-1-redundancy-support-for-c-series-rack-servers","title":"Cisco HCI-PSU1-1200W | UCS C-Series 1200W Titanium AC Power Supply","description":"\u003cp\u003eThis 1200W hot-swappable AC power supply is rated 80 PLUS Titanium and is designed for Cisco C-Series based Compute Hyperconverged rack servers. It accepts auto-ranging AC input and supports both low-line and high-line operation, making it suitable for a wide range of data centre power feeds. One PSU is required and a second identical unit can be fitted for 1+1 redundancy, helping maintain uptime in production server deployments.\u003c\/p\u003e \u003cp\u003eEnquire with XS Network Tech for new or used pricing and availability.\u003c\/p\u003e","brand":"Cisco","offers":[{"title":"Default Title","offer_id":47506536792234,"sku":"HCI-PSU1-1200W","price":0.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0661\/9181\/8922\/files\/ttttHqxc6UuLdsPRKEFvMQ.c-r_250faf54-91dd-4b15-9c60-3366ae29c6e4.jpg?v=1761269976"},{"product_id":"cisco-hci-psu1-1200w-m6-1200w-ac-hot-swap-psu-80-plus-titanium-auto-ranging-ac-input-n-1-redundancy-support-for-c-series-rack-servers-m5-m6","title":"Cisco HCI-PSU1-1200W-M6 | 1200W AC Titanium Power Supply for M6 HCI Servers","description":"\u003cp\u003eThis 1200W AC hot-plug power supply module delivers 80 PLUS Titanium efficiency for Cisco C-Series based M6 HCI servers. It uses an auto-ranging 100-230 VAC input with an IEC320 C14 connector, installs tool-lessly and supports redundant N+1 power configurations. It is the HCI-orderable counterpart of the UCSC-PSU1-1200W, suited to replacing or adding capacity in hyperconverged deployments.\u003c\/p\u003e \u003cp\u003eEnquire with XS Network Tech for new or used pricing and availability.\u003c\/p\u003e","brand":"Cisco","offers":[{"title":"Default Title","offer_id":47506536890538,"sku":"HCI-PSU1-1200W-M6","price":0.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0661\/9181\/8922\/files\/ttttHqxc6UuLdsPRKEFvMQ.c-r_57b9a8a8-94f8-4325-8282-a530cf0138e0.jpg?v=1761269977"},{"product_id":"cisco-hci-psu1-1600w-1600w-ac-hot-swap-psu-80-plus-platinum-auto-ranging-ac-input-n-1-redundancy-support-for-c-series-rack-servers-not-eu-uk-lot-9-compliant","title":"Cisco HCI-PSU1-1600W | UCS C-Series 1600W AC Power Supply, 80 PLUS Platinum","description":"\u003cp\u003eThis 1600W hot-swappable AC power supply is built for Cisco UCS C-Series and HyperFlex (HCI) rack servers. It is 80 PLUS Platinum rated and runs from a 200-240 VAC input using the RSP2 form factor, making it suited to redundant PSU configurations in data centre and enterprise deployments. This is the non-Lot 9 variant, delivering 12 VDC main and standby output.\u003c\/p\u003e \u003cp\u003eEnquire with XS Network Tech for new or used pricing and availability.\u003c\/p\u003e","brand":"Cisco","offers":[{"title":"Default Title","offer_id":47506536988842,"sku":"HCI-PSU1-1600W","price":0.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0661\/9181\/8922\/files\/T2jMZmh-ckW79MtsPQccGg.c-r_5aac3640-a184-40ec-8f6e-b2668e6e7f98.jpg?v=1761269978"},{"product_id":"cisco-hci-psu1-1600w-m6-rack-server-psu-1600w-ac-80-plus-platinum-hot-swap-n-1-ready-ucs-c-series-m6-not-eu-uk-lot-9-compliant","title":"Cisco HCI-PSU1-1600W-M6 | UCS C-Series M6 1600W AC Platinum Power Supply","description":"\u003cp\u003eHot-swappable 1600W AC power supply with 80 PLUS Platinum efficiency for Cisco UCS C-Series M6 rack servers. It supports N+1 redundancy configurations, allowing a failed unit to be replaced without taking the server offline. This variant is not EU\/UK Lot 9 compliant, which distinguishes it from compliant sibling power supplies.\u003c\/p\u003e \u003cp\u003eEnquire with XS Network Tech for new or used pricing and availability.\u003c\/p\u003e","brand":"Cisco","offers":[{"title":"Default Title","offer_id":47506537087146,"sku":"HCI-PSU1-1600W-M6","price":0.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0661\/9181\/8922\/files\/T2jMZmh-ckW79MtsPQccGg.c-r_d2bffc5a-51ba-4719-b9d3-623f71b59365.jpg?v=1761269978"},{"product_id":"cisco-hci-psu1-2300w-rack-server-psu-2300w-ac-80-plus-titanium-hot-swap-n-1-ready-ucs-rack-servers","title":"Cisco HCI-PSU1-2300W | UCS 2300W AC Titanium Power Supply, Hot-Swap","description":"\u003cp\u003eThis 2300W AC power supply is designed for Cisco UCS rack servers and carries an 80 PLUS Titanium efficiency rating. The hot-swap design allows the unit to be replaced without powering down the server, and N+1 redundancy readiness supports resilient power configurations in data centre and enterprise deployments. It suits administrators expanding or maintaining UCS rack server power capacity.\u003c\/p\u003e \u003cp\u003eEnquire with XS Network Tech for new or used pricing and availability.\u003c\/p\u003e","brand":"Cisco","offers":[{"title":"Default Title","offer_id":47506537218218,"sku":"HCI-PSU1-2300W","price":0.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0661\/9181\/8922\/files\/ttttHqxc6UuLdsPRKEFvMQ.c-r_6b3f29bd-95e4-482c-9ac3-c4d76f3eeb17.jpg?v=1761269980"},{"product_id":"cisco-hci-psu1-2300w-m6-rack-server-psu-2300w-ac-80-plus-titanium-hot-swap-n-1-ready-ucs-c-series-m6","title":"Cisco HCI-PSU1-2300W-M6 | UCS C-Series M6 2300W AC Titanium Power Supply","description":"\u003cp\u003eThis 2300W AC power supply is designed for Cisco UCS C-Series M6 rack servers and is rated 80 PLUS Titanium for high power conversion efficiency. The hot-swappable design supports N+1 redundant power configurations, allowing a failed unit to be replaced without taking the server offline. It suits enterprise data centre and hyperconverged deployments that need dependable, efficient power delivery for dense rack server workloads.\u003c\/p\u003e \u003cp\u003eEnquire with XS Network Tech for new or used pricing and availability.\u003c\/p\u003e","brand":"Cisco","offers":[{"title":"Default Title","offer_id":47506537316522,"sku":"HCI-PSU1-2300W-M6","price":0.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0661\/9181\/8922\/files\/ttttHqxc6UuLdsPRKEFvMQ.c-r_0761da3b-6fb8-4c16-a5c5-c162fbbbe055.jpg?v=1761269980"},{"product_id":"cisco-hci-psu1-770w-rack-server-psu-770w-ac-hot-swap-n-1-ready-ucs-c-series-not-eu-uk-lot-9-compliant","title":"Cisco HCI-PSU1-770W | UCS C-Series 770W AC Power Supply, Not EU\/UK Lot 9","description":"\u003cp\u003eThe Cisco HCI-PSU1-770W is a hot-swappable 770W AC power supply for UCS C-Series rack servers, supporting N+1 redundancy for resilient server power. This variant is not EU\/UK Lot 9 compliant. It suits data centre and enterprise rack deployments where a replacement or additional redundant power supply is required.\u003c\/p\u003e \u003cp\u003eEnquire with XS Network Tech for new or used pricing and availability.\u003c\/p\u003e","brand":"Cisco","offers":[{"title":"Default Title","offer_id":47506537414826,"sku":"HCI-PSU1-770W","price":0.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0661\/9181\/8922\/files\/ilacpbPzfUi_hcZXy4MyTw.c-r_a5194ebd-37fe-4222-a44e-6c8e55dc2f15.jpg?v=1761269981"},{"product_id":"cisco-hci-psuv2-1050dc-1050w-48v-dc-rack-server-psu-hot-plug-redundant-capable-ucs-c-series-compatible","title":"Cisco HCI-PSUV2-1050DC | UCS 1050W -48V DC Hot-Plug Power Supply","description":"\u003cp\u003eThis 1050W power supply module is a hot-plug, redundant-capable unit for Cisco UCS C-Series based rack servers and HCI nodes. It runs from a -48 VDC telco-style input, making it well suited to data centres and telco sites with DC power infrastructure. It delivers 1050 W on the 12 VDC main rail plus 36 W standby, with 92% or better efficiency at 50% load. It is the HCI-catalogue equivalent of UCSC-PSUV2-1050DC.\u003c\/p\u003e \u003cp\u003eEnquire with XS Network Tech for new or used pricing and availability.\u003c\/p\u003e","brand":"Cisco","offers":[{"title":"Default Title","offer_id":47506538102954,"sku":"HCI-PSUV2-1050DC","price":0.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0661\/9181\/8922\/files\/images_4b5620b2-727e-41fe-9947-b35ffb917084.jpg?v=1761269982"},{"product_id":"cisco-hci-psuv21050dcm6-1050w-48v-dc-rack-server-psu-hot-plug-redundant-capable-ucs-c-series-m6","title":"Cisco HCI-PSUV21050DCM6 | Compute HCI M6 1050W -48V DC Platinum Power Supply","description":"\u003cp\u003eThis 1050W -48V DC Platinum power supply is a hot-plug, tool-less module designed for Cisco M6 HCI and UCS C-Series rack servers. It delivers 12 VDC main output with a 12 VDC standby rail and supports redundant power supply configurations in DC-fed data centre and telco environments. The common electrical and physical design is shared across the M6 power supply family, simplifying spares planning.\u003c\/p\u003e \u003cp\u003eEnquire with XS Network Tech for new or used pricing and availability.\u003c\/p\u003e","brand":"Cisco","offers":[{"title":"Default Title","offer_id":47506538234026,"sku":"HCI-PSUV21050DCM6","price":0.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0661\/9181\/8922\/files\/Cisco.png?v=1773790226"},{"product_id":"cisco-hcix-psu-6332-dc-48v-dc-psu-module-hot-swap-for-6332-6454-64108-switches","title":"Cisco HCIX-PSU-6332-DC | UCS 6300\/6400 Fabric Interconnect Power Supply, -48VDC 930W","description":"\u003cp\u003eHot-swappable -48 VDC, 930 W power supply module for Cisco UCS 6332, 6454 and 64108 Fabric Interconnects. The same DC power supply is shared across the UCS 6300 and 6400 Series, supporting 1+1 power redundancy in the fabric interconnect chassis. It delivers 12 VDC output with 80Plus Platinum efficiency and port-side exhaust, suited to data centres with -48 VDC power plants.\u003c\/p\u003e \u003cp\u003eEnquire with XS Network Tech for new or used pricing and availability.\u003c\/p\u003e","brand":"Cisco","offers":[{"title":"Default Title","offer_id":47506580078762,"sku":"HCIX-PSU-6332-DC","price":0.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0661\/9181\/8922\/files\/cisco-UCS-PSU-6332-DC.jpg?v=1763951931"},{"product_id":"cisco-hcix-psu-64108-ac-ac-psu-100-240v-auto-range-hot-swap-for-hcix-64108","title":"Cisco HCIX-PSU-64108-AC | UCS 64108 1200W AC Hot-Swap Power Supply","description":"\u003cp\u003eThis 1200 W AC power supply is a hot-swappable module designed for the Cisco UCS 64108 Fabric Interconnect. It accepts auto-ranging 100-240 VAC input and delivers 80 Plus Platinum efficiency. The UCS 64108 uses two modules in a 1+1 redundant configuration, making it suited to replacing or adding a power supply in data centre fabric interconnect deployments.\u003c\/p\u003e \u003cp\u003eEnquire with XS Network Tech for new or used pricing and availability.\u003c\/p\u003e","brand":"Cisco","offers":[{"title":"Default Title","offer_id":47506580177066,"sku":"HCIX-PSU-64108-AC","price":0.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0661\/9181\/8922\/files\/datasheet-c78-741116_2_1c29aaf5-4639-4649-86fc-9030ec37771d.png?v=1761270052"},{"product_id":"meraki-ma-pwr-30wac-ac-adapter-30w-indoor-replacement-psu-for-mx64-security-appliance-black","title":"Meraki MA-PWR-30WAC | MX 30W AC Power Adapter, Replacement PSU for MX64","description":"\u003cp\u003eThis is a 30W AC replacement power adapter for the Meraki MX64 cloud-managed security appliance, part of the Meraki MX range. It suits branch and small-office sites where an adapter has failed, been lost or is needed as a spare.\u003c\/p\u003e\u003cp\u003eThe adapter is rated at 30W and takes an AC input. It is supplied as a replacement PSU for the MX64, so it restores power to the appliance without any change to the existing deployment or configuration.\u003c\/p\u003e\u003cp\u003eIt is also listed for use with the MX64W, MX67, MX67W and MX67C security appliances.\u003c\/p\u003e\u003cp\u003eEnquire with XS Network Tech for new or used pricing and availability.\u003c\/p\u003e","brand":"Meraki","offers":[{"title":"Default Title","offer_id":47506986074282,"sku":"MA-PWR-30WAC","price":0.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0661\/9181\/8922\/files\/W35MrhT4ykeqJXh370ViZg.c-r_66395b25-16c6-405a-b775-69cbe4b16e1b.jpg?v=1760316682"},{"product_id":"meraki-ma-pwr-90wac-90w-ac-adapter-100-240v-auto-ranging-external-psu-for-mx65-ms120-8-8lp","title":"Meraki MA-PWR-90WAC | 90W AC Power Adapter, 54V 1.67A, MX65 and MS120-8","description":"\u003cp\u003eThis external 90W AC power adapter is a replacement or spare power supply for the Meraki MX65 security appliance and the MS120-8 and MS120-8LP access switches. It suits branch and small-office deployments where a failed or missing adapter needs to be swapped out quickly.\u003c\/p\u003e\u003cp\u003eThe adapter accepts a 100-240V AC auto-ranging input and delivers 54V DC at 1.67A, giving a total output of 90W. That output supports the PoE budget of the MS120-8LP and the PoE ports on the MX65, so connected PoE devices can be powered as designed. Because the input is auto-ranging, it can be used with mains supplies in different regions without a separate voltage selector.\u003c\/p\u003e\u003cp\u003eThe external form factor means the adapter can be replaced without opening the device it powers.\u003c\/p\u003e\u003cp\u003eEnquire with XS Network Tech for new or used pricing and availability.\u003c\/p\u003e","brand":"Meraki","offers":[{"title":"Default Title","offer_id":47506986598570,"sku":"MA-PWR-90WAC","price":0.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0661\/9181\/8922\/files\/InfanaxX6UeZbU57Ym6vHQ.c-r_68faebc3-62b7-4efd-b048-b7e95b6c74ca.jpg?v=1760316687"},{"product_id":"cisco-n01-uac1-ucs-5108-single-phase-ac-psu-hot-swappable-high-efficiency-for-blade-chassis","title":"Cisco N01-UAC1 | UCS 5108 Single-Phase AC Power Distribution Unit","description":"\u003cp\u003eThe N01-UAC1 is the single-phase AC power distribution unit (PDU) for the Cisco UCS 5100 Series blade server chassis, specifically the UCS 5108. It spreads load across the installed hot-swappable power supplies and feeds power to the other chassis components. It suits data centre deployments running Cisco UCS B-Series blades in an AC-powered chassis.\u003c\/p\u003e\u003cp\u003eThe AC PDU provides four power connectors, each rated 15.5 A at 200-240 V and 50-60 Hz. It supports up to four 2500 W hot-swappable power supplies and balances the load between them. This is the single-phase AC variant. DC-powered chassis use a different PDU, and converting an AC chassis to DC by swapping the PDU is not supported.\u003c\/p\u003e\u003cp\u003eIt is built for the AC-powered UCS 5108 chassis only (N20-C6508 \/ UCSB-5108-AC2) and works with the AC power supplies N20-PAC5-2500W and UCSB-PSU-2500ACPL. AC and DC power supplies must not be mixed in the same chassis. The module is not field-serviceable and has no LEDs or buttons.\u003c\/p\u003e\u003cp\u003eEnquire with XS Network Tech for new or used pricing and availability.\u003c\/p\u003e","brand":"Cisco","offers":[{"title":"Default Title","offer_id":47507116523690,"sku":"N01-UAC1","price":0.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0661\/9181\/8922\/files\/Cisco.png?v=1773790226"},{"product_id":"hpe-p03178-b21-flex-slot-psu-1000w-80-plus-titanium-hot-plug-redundant-ready-auto-ranging-100-240v-ac","title":"HPE P03178-B21 | Flex Slot 1000W 100-240V AC Titanium Power Supply","description":"\u003cp\u003eThe HPE Flex Slot 1000W Titanium power supply is a hot-plug, tool-less PSU for HPE ProLiant Gen10, Gen10 Plus and Gen11 servers, select Apollo systems and Alletra 4100 storage servers. It suits data centre deployments that need right-sized, high-efficiency power in single or redundant configurations.\u003c\/p\u003e\u003cp\u003eIt delivers up to 1000W of output from a 100-240V AC input at 50-60 Hz, covering both low-line and high-line feeds. The unit is 80 Plus Titanium certified with up to 96% efficiency, with measured efficiency of around 95% at 200-240V. Nominal input current runs from about 11.0 A at 100V to 4.4 A at 240V, and the unit uses a C14 inlet. It meets EU Lot 9 efficiency requirements and has a form factor 25% smaller than previous-generation Common Slot power supplies, leaving more room for server options.\u003c\/p\u003e\u003cp\u003eThe Flex Slot form factor is shared across supported servers, which simplifies spares planning. It works in a single PSU setup or as redundant PSUs in load-balanced or high-efficiency mode. Mixing PSUs with different output or efficiency ratings in one server may limit redundancy features, so check the QuickSpecs for your server model before ordering.\u003c\/p\u003e\u003cp\u003eEnquire with XS Network Tech for new or used pricing and availability.\u003c\/p\u003e","brand":"HPE","offers":[{"title":"Default Title","offer_id":47507322077354,"sku":"P03178-B21","price":0.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0661\/9181\/8922\/files\/kZicsV4wKESBsvncQQdlxQ.c-r_16a56690-9e51-4e6b-b335-eeb6128f1993.jpg?v=1760317436"},{"product_id":"hpe-p17023-b21-1600w-flex-slot-48v-dc-hot-plug-psu-flex-slot-bay-redundancy-ready","title":"HPE P17023-B21 | Flex Slot 1600W -48VDC Hot-Plug Power Supply","description":"\u003cp\u003eThis hot-plug Flex Slot power supply delivers 1600W from a -48VDC input, built for supported HPE ProLiant, Apollo and Alletra servers. It suits telco, central-office and DC-powered data centre environments where servers need DC-fed, redundancy-capable power.\u003c\/p\u003e\u003cp\u003eThe module is rated at 1600W output and accepts a -48VDC telecom-style DC input, which separates it from the AC-fed Flex Slot options in the same family. It uses the compact HPE Flex Slot form factor, about 25 percent smaller than previous generations, which leaves more room inside the server for other options. The plug-in design allows fast, tool-less hot-plug access for easier serviceability.\u003c\/p\u003e\u003cp\u003eIt supports HPE ProLiant Gen10, Gen10 Plus and Gen11 servers, select HPE Apollo Gen10 and Gen10 Plus systems, and HPE Alletra 4100 data storage servers. Check the QuickSpecs for your server to confirm the supported power supply list. Using one Flex Slot family across supported servers also simplifies spares planning.\u003c\/p\u003e\u003cp\u003eEnquire with XS Network Tech for new or used pricing and availability.\u003c\/p\u003e","brand":"HPE","offers":[{"title":"Default Title","offer_id":47507328434346,"sku":"P17023-B21","price":0.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0661\/9181\/8922\/files\/NlwvCR09VEexhZ0wv80l_Q.c-r.jpg?v=1760396128"},{"product_id":"hpe-p38995-b21-800w-flex-slot-psu-80-plus-platinum-hot-plug-low-halogen-100-240v-ac","title":"HPE P38995-B21 | Flex Slot 800W Platinum Hot-Plug Power Supply, G10+","description":"\u003cp\u003eThis 800W Flex Slot power supply is a hot-plug, tool-less module for HPE servers, built to the Platinum efficiency standard with a low-halogen design. It is the G10+ version, intended for Gen11, Gen10 Plus Intel and Gen10 Plus v2 AMD platforms, including ProLiant, Alletra and Apollo systems used in data centres for redundant or right-sized power.\u003c\/p\u003e\u003cp\u003eThe module delivers up to 800W of rated output from a 100-240V AC input at 50-60Hz, and also accepts 240VDC. Input current is 9.1 A at 100V and 3.6 A at 240V, with efficiency reaching 92.6% at 230V and 240V and a power factor of 0.99. The input connector is C14. Hold-up time at 100% load is a minimum of 10 ms non-redundant and 20 ms redundant. It measures 68.0 x 40.4 x 225.3 mm and weighs 0.91 kg.\u003c\/p\u003e\u003cp\u003eThe common Flex Slot form factor lets spares be shared across supported server platforms. Compatible systems include DL320 Gen11, DL360 and DL380 Gen10 Plus and Gen11, DL365 and DL385 models, ML350 Gen11, RL300 Gen11, Alletra 4110 and 4120, and Apollo 2000 and 4200 Gen10 Plus. It is not compatible with HPE Gen9 servers.\u003c\/p\u003e\u003cp\u003eEnquire with XS Network Tech for new or used pricing and availability.\u003c\/p\u003e","brand":"HPE","offers":[{"title":"Default Title","offer_id":47507349438634,"sku":"P38995-B21","price":0.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0661\/9181\/8922\/files\/Lk4d84yz60yAZQn4rhkw9Q.c-r_fd37c9d0-83d9-45c3-bbcb-98e1c54e2682.jpg?v=1760317767"},{"product_id":"hpe-p38997-b21-1600w-flex-slot-platinum-hot-plug-psu-low-halogen-200-240v-ac-redundant-ready","title":"HPE P38997-B21 | Flex Slot 1600W Platinum Power Supply, 200-240V AC","description":"\u003cp\u003eThis is a 1600W hot-plug power supply from the HPE Flex Slot range. It is built for HPE ProLiant rack servers that use Flex Slot power supplies and suits both primary and redundant power configurations.\u003c\/p\u003e\u003cp\u003eThe module is 80 PLUS Platinum certified with approximately 94% efficiency, which helps reduce wasted energy and heat in the rack. It accepts AC 200-240V input and delivers 1600W of output. It is a low halogen build, and the hot-plug design makes it a field-replaceable plug-in module that can be swapped without powering down a redundant system.\u003c\/p\u003e\u003cp\u003eAt around 3.8 in wide, 13 in deep and 7.7 in high, it fits the standard Flex Slot bay. HPE ProLiant servers that use this module include the DL325 Gen11, DL345 Gen10 Plus, DL345 Gen11 and DL360 Gen10 Plus. Check the HPE QuickSpecs for your server model to confirm the full compatibility list.\u003c\/p\u003e\u003cp\u003eEnquire with XS Network Tech for new or used pricing and availability.\u003c\/p\u003e","brand":"HPE","offers":[{"title":"Default Title","offer_id":47507349504170,"sku":"P38997-B21","price":0.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0661\/9181\/8922\/files\/2RnwNiQuuUmr6hp21LN8dg.c-r_4dd43e55-1a29-4e7c-81cf-ca18d5aa3d7e.jpg?v=1760317768"},{"product_id":"hpe-p43150-b21-700w-flex-slot-48vdc-hot-plug-psu-low-halogen-proliant-dl110-compatible","title":"HPE P43150-B21 | Flex Slot 700W -48VDC Hot-Plug Power Supply, Low Halogen","description":"\u003cp\u003eThis 700W -48VDC hot-plug power supply is a Flex Slot unit for the HPE ProLiant DL110 Gen10 Plus Telco server. It is built for telecom, 5G (vRAN) and edge deployments where the server runs from a -48VDC telecom power plant, including NEBS Level 3 and ETSI carrier-grade environments.\u003c\/p\u003e\u003cp\u003eThe supply delivers a 700W output from a -48VDC input, with a rated line voltage of -40 to -72 Vdc and a maximum input of 700W at both -40 VDC and -72 VDC. Efficiency is up to 94%, with a maximum heat output of 2593 BTU\/hr at -40 VDC and 2537 BTU\/hr at -72 VDC. It uses a tool-less hot-plug Flex Slot design with reverse airflow to suit the front-cabled DL110 layout, and it is low halogen.\u003c\/p\u003e\u003cp\u003eIt fits the HPE ProLiant DL110 Gen10 Plus Telco server, which takes one or two Flex Slot supplies. It is the DC alternative to the 700W Platinum AC kit P44975-B21.\u003c\/p\u003e\u003cp\u003eEnquire with XS Network Tech for new or used pricing and availability.\u003c\/p\u003e","brand":"HPE","offers":[{"title":"Default Title","offer_id":47507360317610,"sku":"P43150-B21","price":0.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0661\/9181\/8922\/files\/tv6GupqqiUeR3D9ENIRz0A.c-r_a092ff43-0edf-4025-a394-23f7232f4bd5.jpg?v=1760317852"},{"product_id":"hpe-p44975-b21-700w-flex-slot-ac-psu-80-plus-platinum-hot-plug-redundant-ready-low-halogen","title":"HPE P44975-B21 | Flex Slot 700W Platinum AC Power Supply, Hot-Plug","description":"\u003cp\u003eThis hot-plug Flex Slot AC power supply from the HPE Flexible Slot range is built for entry-level 1U rack servers such as the ProLiant DL110 Gen10 Plus and DL110 Gen11. It suits edge, SMB and telco deployments where a field-replaceable power module is needed for primary or redundant power.\u003c\/p\u003e\u003cp\u003eThe module delivers 700W maximum rated output from a 100-240 V AC input and carries 80 PLUS Platinum efficiency, with efficiency of up to around 94% across the Platinum family. It uses a low halogen construction. At typical load the DL110 Gen11 QuickSpecs list heat output of 2660 BTU\/hr at 100 VAC and 2570 BTU\/hr at 200-240 VAC. Option part number is P44975-B21 and the spare part number is P43064-001.\u003c\/p\u003e\u003cp\u003eFor redundant operation, install two matched supplies with the same wattage and efficiency rating in the same server. The low halogen design is not compatible with HPE Gen9 servers. It is listed for the ProLiant DL110 Gen10 Plus, DL110 Gen11 and DL145 Gen11.\u003c\/p\u003e\u003cp\u003eEnquire with XS Network Tech for new or used pricing and availability.\u003c\/p\u003e","brand":"HPE","offers":[{"title":"Default Title","offer_id":47507361628330,"sku":"P44975-B21","price":0.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0661\/9181\/8922\/files\/Eqt8tax63kWLe3oIJjwyPQ.c-r_ca76bbe4-7763-450f-be5e-eb33d731c2c6.jpg?v=1760317859"},{"product_id":"hpe-p48927-b21-dl360-gen11-sff-system-insight-display-power-module-role-powers-front-panel-sid-fit-dl360-gen11-sff-integrates-with-system-health-leds","title":"HPE P48927-B21 | ProLiant DL360 Gen11 SFF SID Power Module Kit","description":"\u003cp\u003eThis System Insight Display power module kit is designed for the HPE ProLiant DL360 Gen11 small form factor server. It supplies power to the front-panel System Insight Display, which works with the server's system health LEDs to indicate component status at a glance. It is a replacement or spare component for maintaining the front-panel diagnostics of DL360 Gen11 SFF deployments.\u003c\/p\u003e \u003cp\u003eEnquire with XS Network Tech for new or used pricing and availability.\u003c\/p\u003e","brand":"HPE","offers":[{"title":"Default Title","offer_id":47507371819178,"sku":"P48927-B21","price":0.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0661\/9181\/8922\/files\/oWkje-1lKUu7hfftQeCmfQ.c-r_3a49c649-5429-419c-bbe1-ecd75dd80a8f.jpg?v=1760317910"},{"product_id":"hpe-p59409-b21-metered-pdu-1-phase-7-3-kva-32x-c13-6x-combo-c13-c19-32a-200-240v-vertical-rackmount-local-metering","title":"HPE P59409-B21 | G3 Metered PDU, 7.3kVA, 32A, 32x C13 + 6x C13\/C19","description":"\u003cp\u003eThis G3 Metered PDU from the Enlogic by nVent G3 Metered Series is a vertical, mid-height rack power distribution unit for international 230V single-phase supply. It suits data centre racks of servers, storage and networking equipment that need remote power and environmental monitoring.\u003c\/p\u003e\u003cp\u003eThe INTL model is rated at 7.3 kVA with 220-240V output. Input is 1-phase 230V at 32A through an IEC 60309 32A plug on a 10 ft cord, protected by two 1-pole 16A circuit breakers. Outlets comprise 32 C13 and 6 C13\/C19 combination receptacles. Outlet-level metering meets IEC 62053-21 Class 1 (±1% or better) for amperage, voltage, wattage and kWh. Network connectivity is 1Gb Ethernet, with two environmental sensor ports that can be expanded with G3 PDU Sensor Port Hubs. No licence or subscription is required.\u003c\/p\u003e\u003cp\u003eIt is designed for HPE Advanced and Enterprise racks, 1075mm and 1200mm deep, and works with most third-party IT racks. It supports HPE IEC Locking Power Cords, HPE PDU extension bars and G3 PDU environmental sensors.\u003c\/p\u003e\u003cp\u003eEnquire with XS Network Tech for new or used pricing and availability.\u003c\/p\u003e","brand":"HPE","offers":[{"title":"Default Title","offer_id":47507413270698,"sku":"P59409-B21","price":0.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0661\/9181\/8922\/files\/oWkje-1lKUu7hfftQeCmfQ.c-r_79efefdc-ca3c-401a-b59d-1d4188197861.jpg?v=1760318096"},{"product_id":"hpe-p59417-b21-metered-pdu-3-phase-22-kva-36x-c13-12x-combo-c13-c19-32a-380-415v-vertical-rackmount-local-metering","title":"HPE P59417-B21 | G3 Metered 3-Phase PDU, 22 kVA, 36x C13 + 12x C13\/C19","description":"\u003cp\u003eThe Enlogic by nVent G3 Metered PDU is a full-height, double-sided vertical rack power distribution unit built for HPE Advanced and Enterprise racks, and also suited to other industry-standard server racks. It provides high-density 3-phase power distribution and metering for data centre racks housing compute, storage and networking equipment.\u003c\/p\u003e\u003cp\u003eThis worldwide model is rated for 22 kVA at 200-240V. It offers 48 outlets in total, made up of 36 C13 receptacles and 12 C13\/C19 combination receptacles, protected by six 1-pole 20A circuit breakers. Input is 3-phase 32A, 200-240V or 346-415V, through an IEC 60309 32A 3-phase plug on a 10 ft input cord. Billing-grade metering and 1GbE network connectivity allow power use to be monitored per PDU.\u003c\/p\u003e\u003cp\u003eThe PDU mounts vertically in 0U space with toolless button and keyhole mounting. It supports HPE IEC locking power cords, extension bar options and up to eight environmental sensors for temperature, humidity and leakage. It is rated for operation at up to 60 C. No licence or subscription is required.\u003c\/p\u003e\u003cp\u003eEnquire with XS Network Tech for new or used pricing and availability.\u003c\/p\u003e","brand":"HPE","offers":[{"title":"Default Title","offer_id":47507413434538,"sku":"P59417-B21","price":0.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0661\/9181\/8922\/files\/oWkje-1lKUu7hfftQeCmfQ.c-r_81924809-4d67-4188-83c6-d4bf64178361.jpg?v=1760318097"}],"url":"https:\/\/www.xsnet.com.au\/collections\/power-supplies.oembed?page=3","provider":"XS Network Tech","version":"1.0","type":"link"}